We will exhibit at the "10th Adhesive and Joining EXPO [Tokyo]" held from September 30 (Wednesday) to October 2 (Friday).

The basic structure is the same as the "Mohno Pump," a progressing cavity pump! It achieves high-precision application even with high-viscosity liquids and high-concentration slurries.

The basic structure of the Mohno Dispenser is a progressing cavity pump of the same rotary volumetric type as the Mohno Pump. This structure allows for the instant discharge of high-viscosity liquids and precise application. The Mohno Dispenser, which achieves improved product quality and reduced cycle time, is active in various industries such as electronics, food, automotive, and cosmetics. [Features] - Instant discharge of high-viscosity liquids up to 1,000,000 mPa·s and high-concentration slurries - Prevents liquid dripping during stops, keeping the workpiece and surroundings clean - Less affected by changes in the state of the liquid, enabling stable application over long periods - Easy setting and adjustment of discharge volume through servo motor control - Achieves quality improvement by accurately applying the necessary amount [Examples of Discharged Liquids] Two-component adhesives, silicone resins, metal pastes, solder pastes, thermal grease, thermal silicone, liquid gaskets, UV-curable adhesives, epoxy resins, conductive adhesives, various slurries, mastic sealers, hemming sealers, steel plate reinforcements, shampoos, lipsticks, emulsions, cold packs, chocolate, whipped cream, seasoning liquids, and more. *For more details, please refer to the PDF catalog or website, or contact us.

• dispenser

For the application of two-component adhesives and gap fillers! Compatible with high-viscosity liquids and high-concentration slurries.

The 2-component mixing specification Mohno Dispenser is a unit that combines two Mohno Dispensers with a static mixer. It allows for continuous application while accurately mixing the base agent and hardener. [Features] ● Easy adjustment of mixing ratio and discharge volume The dispenser has a rotary volumetric single-axis eccentric screw structure, allowing for easy adjustment of the mixing ratio and discharge volume simply by controlling the rotation of the Rotor. ● Stable discharge of high-viscosity liquids It can handle liquids with a viscosity exceeding 500,000 mPa·s. ● High mixing accuracy Even when there is a large difference in viscosity or mixing amounts, it can maintain stable mixing accuracy. ● Supports large volumes It is suitable for application to large workpieces in processes such as EV manufacturing. [Examples of discharged liquids] 2-component epoxy resin, 2-component silicone resin, 2-component gap filler *For more details, please contact us.

• dispenser

In civil engineering sites, there is an increasing demand to address various challenges such as labor shortages, heat countermeasures, and environmental considerations. Therefore, it is important to have the option of "new technologies" in addition to traditional methods. Hyper CLT mats are a new type of civil engineering mat that utilizes wood CLT. They are lightweight, easy to install and remove, and have excellent transport efficiency. Furthermore, they can provide unique advantages of wood, such as reducing summer glare and metal noise, as well as CO2 fixation. A significant point is that it is a **Ministry of Land, Infrastructure, Transport and Tourism NETIS registered technology "TH-250021-A."** In public works, it can be utilized as a new technology registered with NETIS for proposals involving creativity and environmental considerations. By incorporating new technologies, the scope of site development expands beyond just traditional steel plates. The Hyper CLT mats, which combine wood, NETIS, civil engineering, and CLT, are an option that creates new value for future sites.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

We will be exhibiting at BioJapan 2026 On the day of the event, we will be working alongside our partner companies to address your needs. We sincerely look forward to seeing you there. [Booth No. C-66] 　　・LibraMedicina 　　・Synmax Biochemical (Intermediate manufacturing, fermentation technology, biotransformation) [Booth No. C-71 (adjacent)] ・Mycenax Biotech (CDMO, our business partner) Translated with DeepL.com (free version)

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)