Notice of Participation in the "Monozukuri Fair 2026" (Fukuoka City)

A fluorine-based cleaner specialized for the cleaning and dissolution of uncured to semi-cured urethane/epoxy! Suitable as an alternative to chlorine-based, hydrocarbon-based, and bromine-based cleaners!

【Features】 ◆ A fluorine-based cleaning agent specialized for the cleaning and dissolution of uncured to partially cured urethane/epoxy. This cleaning agent is effective for both water-soluble and oil-soluble resins with just one solution. It can clean a wide range from uncured urethane raw materials to partially cured mixtures. ◆ No flash point, non-applicable under fire safety laws!! It is a highly safe cleaning agent. ◆ Three types available, ranging from low-cost to high-performance/low-toxicity products. Due to its low toxicity, it contributes to reducing the burden on workers. It is suitable as an alternative to chlorine-based, hydrocarbon-based, and bromine-based cleaning agents. 【Applications】 ◆ Cleaning agent for uncured urethane and epoxy resins ◆ Cleaning agent for automatic dispensing machines, piping, and tanks ◆ Soaking and cleaning of partially cured mixing nozzles ◆ Cleaning/removal of uncured urethane and epoxy adhesives ◆ Flow-through/wiping cleaning of molds, manufacturing kilns, etc. 【Physical Properties】 ◆ Main component: Fluorine-based solvent ◆ Flash point: None ◆ Boiling point: 77–78℃ ◆ Specific gravity: 1.07–1.10 (20℃) ◆ ODP: 0 (reference value)

• Piping Materials

We propose fluorinated inert liquids (PFC) that will cease production by the end of 2025, as well as PFPE with limited supply.

Are you having trouble with fluorinated inert liquids (PFC) that will be discontinued by the end of 2025 or with the limited supply of PFPE? As an alternative, we propose the "PF Series" from Kaneko Chemical! 【Features】 1) Chemical inertness: Significantly low impact on chemicals, metals, and resins. 2) High electrical insulation: Can be used while energized due to its high electrical insulation properties. 3) No flash point & low toxicity: No flash point and very low toxicity, ensuring high safety. 4) Similar physical properties to discontinued products, minimizing the need for equipment reconfiguration or parts replacement when switching liquids. 5) Extremely wide liquid temperature range: Compared to PFC, PFPE can maintain a liquid state over a broader range from extremely low to high temperatures. 6) Stable viscosity characteristics: Minimal viscosity change with temperature fluctuations, providing more stable performance.

• Chemicals
• lens
• Cleaning agents

We propose alternatives to hydrofluoroether (HFE), which is scheduled to cease production in 2025!

Are you having trouble with hydrofluoroether (HFE) that will be discontinued in 2025? As an alternative, we propose the "HFE-7000 series" from Kaneko Chemical! 【Features】 ◆ Excellent environmental performance among fluorinated liquids (ODP=0 / low GWP) ◆ Outstanding safety during use (no flash point, low toxicity, high permissible concentration) ◆ Cleaning performance utilizing low viscosity / low surface tension / low evaporation latent heat ◆ Applicable to a wide range of materials ◆ Excellent thermal conductivity with minimal viscosity change at low temperatures and low melting point ◆ Thermally and chemically stable 【Main Applications】 ◆ Cleaning agents ◆ Water removal / finishing drying ◆ Thinners ◆ Dispersion media ◆ Solvents ◆ Refrigerants 【Product Lineup】 ◆ HFE-7100 (Component: HFE) ◆ HFE-7200 (Component: HFE) ◆ HFE-7300 (Component: HFE) ◆ HFE-71DE (Component: HFE + t-DCE) ◆ HFE-72DE (Component: HFE + t-DCE) ◆ HFE-73DE (Component: HFE + t-DCE)

• Other electronic parts
• Weight related measuring instruments
• Insulation Tester

Not applicable for organic! Not applicable for specialized! Not applicable for fire safety law! A cleaning agent that combines cleaning power, drying ability, and environmental friendliness. A substitute for chlorine-based solvents! Also available for aluminum and silver!

The "e Clean 21N Series" is a bromine-based cleaning agent designed for various products that have fewer regulatory restrictions, excellent cleaning and drying properties, and are environmentally friendly. It can be used with various cleaning methods such as steam cleaning, jab washing, spray washing, hand wiping, and ultrasonic cleaning. This product is ideal for those who are struggling with regulatory compliance when using methylene chloride or trichloroethylene. There are also products available for aluminum, silver, and silver-plated items. 【Main Features】 (1) Few regulatory restrictions - Not subject to the Organic Solvent Prevention Regulation (Organic Law) - Not subject to the Specific Chemical Substance Hazard Prevention Regulation (Specific Law) - Not subject to the Fire Service Act - Not subject to the Poisonous and Deleterious Substances Control Act (2) Excellent cleaning and drying properties - No discoloration of aluminum and silver products! (3) Compatible with various cleaning methods - Suitable for steam cleaning, jab washing, spray washing, hand wiping, and ultrasonic cleaning (4) Environmentally friendly - Recyclable *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals
• glue
• Cleaning agents

A must-see for those considering dechlorinated methylene! An environmentally friendly resin solvent with powerful dissolving power and reduced toxicity!

The "Resin Solvent eSolve 21 Series" developed by Kaneko Chemical is an environmentally friendly resin solvent that powerfully dissolves, strips, and swells resins (epoxy, urethane, silicone) both before and after curing, while minimizing toxicity. Traditionally, many cleaning agents with a significant environmental impact or hazardous cleaning agents subject to fire safety laws have been used. This product is suitable for those looking to improve the working environment without compromising dissolving power! For more details, please download the catalog or contact us.

• Chemicals
• Other consumables

Fluorine-based cleaning and degreasing agents that do not contain HFCs! Not subject to various regulations! Due to excellent drying properties, natural drying is possible after rinsing or hand wiping!

"Nexia S-19" is a fluorine-based cleaning agent suitable for degreasing and cleaning. It is also suitable for cleaning uncured polyurethane resins and demonstrates excellent effectiveness for nozzle cleaning. It has excellent drying properties, enabling one-component cleaning through natural drying after washing and wiping. As a fluorine-based cleaning agent that does not contain HFCs, it is environmentally friendly. ● Main Features of "Nexia S-19" 1) Easy to handle due to fewer regulatory restrictions as it does not contain HFCs or bromine. 2) Ozone Depletion Potential (ODP) is nearly 0, and Global Warming Potential (GWP) is low. 3) Allows one-component cleaning through natural drying after washing. 4) Non-flammable (not subject to fire service law). 5) Not subject to the following regulations: a. Fire Service Law b. Specific Chemical Substance Hazard Prevention Regulations c. Organic Solvent Poisoning Prevention Regulations d. PRTR Law e. Revised Ozone Layer Protection Law f. Law on Promotion of Measures against Global Warming g. REACH, RoHS2 【Main Applications】 1) Cleaning of mineral oil-based cutting oils 2) Hand wiping cleaning of molds, rolls, etc. 3) Cleaning of uncured polyurethane resins and nozzle cleaning ★ For product details, please refer to the materials. Feel free to contact us for inquiries.

• Cleaning agents
• Other cleaning agents

Fluorine-based cleaning agents that do not contain HFC! Not subject to various regulations! Minimal damage to PC and ABS resins, achieving strong dissolving power and cleaning ability against oils!

"Nexia S-63" is a fluorine-based cleaning agent suitable for degreasing and cleaning. It can be used for hand wiping cleaning of steel plates, molds, rolls, etc., that have mineral oil-based processing oils attached, as well as for immersion cleaning of metal processing parts. Compared to other fluorine-based cleaning agents, it offers excellent cost performance. As it does not contain HFCs, it is an environmentally friendly cleaning agent. Main features of "Nexia S-63": 1) Easy to handle due to fewer regulatory restrictions as it does not contain HFCs or bromine. 2) Ozone depletion potential (ODP) is close to 0, and the global warming potential (GWP) is low. 3) Superior cost performance compared to other fluorine-based cleaning agents. 4) Non-flammable (not subject to fire service law). 5) Not subject to the following regulations: a. Fire Service Law b. Specific Chemical Substances Hazard Prevention Regulations c. Organic Solvent Poisoning Prevention Regulations d. PRTR Law e. Revised Ozone Layer Protection Law f. Law for the Promotion of Measures Against Global Warming g. REACH, RoHS2 Main applications: 1) Hand wiping cleaning of mineral oil-based processing oils. 2) Hand wiping cleaning of molds, rolls, etc. 3) Hand wiping cleaning of silicone oil. 4) Immersion cleaning of metal processing parts. For product details, please refer to the materials. Feel free to contact us for inquiries.

• Cleaning agents
• Other cleaning agents

Proven results at automotive maintenance shops! Hand wiping cleaning, spray washing, and distillation regeneration possible with a co-boiling type. Not subject to organic regulations! Not subject to fire laws! Great cost performance!

The "Nexia A-6" is a cleaning agent that has become a trend in the recent automotive industry, focusing on environmental considerations, leading to increased inquiries from automotive maintenance shops. It also demonstrates excellent effectiveness in cleaning uncured resins. Particularly, it is not subject to various regulations, including the Fire Service Act, the Organic Solvent Regulation, the Specific Chemical Substances Hazard Prevention Regulation, the PRTR Law, and the Kigali Amendment, making it an environmentally friendly fluorine-based cleaning agent that is also recyclable. 【Main Features】 (1) It offers excellent cost performance compared to other HFO-based cleaning agents! (2) Existing cleaning equipment used with "HCFC-225" can be utilized! (3) Distillation regeneration is possible! (4) There are few regulatory restrictions! - Not subject to the Organic Solvent Prevention Regulation - Not subject to the Specific Chemical Substances Hazard Prevention Regulation - Not subject to the Fire Service Act - Not subject to the PRTR Law - Not subject to the Kigali Amendment 【Main Applications】 (1) Cleaning of uncured resins (2) Metal degreasing cleaning (3) Cleaning and dilution of silicone oils! (4) As a substitute for "HCFC-225"! (5) Hand cleaning of oily stains! ★ For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Chemicals
• Cleaning agents
• Other consumables

Yamamoto Vinitar Co., Ltd. will be exhibiting at the "Frozen, Retort, and Instant Food Material Technology Exhibition" held at "Pacifico Yokohama Exhibition Hall C." Concurrently, the "2nd Nutritional Food Material Exhibition (a B to B food material exhibition focused on health and nutrition)" and the "9th P&B Japan" (a retail, baking, and confectionery exhibition) will also take place. At our booth, we will showcase a demonstration of the 'Range Type' high-frequency thawing device, along with a panel display of high-frequency thawing devices (small batch type; processing capacity of 60kg to 170kg/h, medium batch type; processing capacity of 200kg to 500kg/h, medium to large continuous type; processing capacity of 200kg to 4000kg/h) and provide a consultation desk for high-frequency and microwave heating. If you have any concerns regarding heating, drying, thawing, sterilization, secondary heating sterilization, or pest control using high-frequency/microwave technology, please visit us. [Main Examples of Thawing and Heating Processes] - Heating and drying for confectionery and baking, tempering and melting of butter, thawing of meat, pork, chicken, canned fish, squid, octopus, etc., secondary sterilization of prepared foods, and more. We look forward to your visit. [Exhibited Equipment] ■ High-frequency thawing device 　・ Range type

We will be exhibiting at Semicon Japan 2024, which will be held at Tokyo Big Sight from December 11 (Wednesday) to December 12 (Friday). If you are interested, please come to the venue. ■ Products to be exhibited 1. Spectral interference optical thickness sensor CHRocodile 2 DW/ 2IT 2. Area scanner for measuring the thickness and shape of 12" wafers - Flying Spot Scanner (FSS) 3. Chromatic aberration confocal optical line sensor CLS2.0 4. Chromatic aberration confocal line camera CVC 5. Chromatic aberration confocal optical single-point sensor CHRocodile Mini 6. Non-contact thickness measurement sensor for opaque materials Enovasnese 7. Sensor for detecting internal defects non-contactly - Field sensor

Do you have any of these concerns? "I want to ensure proper dispersion, but bubbles won't escape and there are inconsistencies." "It takes too long to degas using vacuum or manual methods, and the process has become reliant on specific individuals." "When mixing at high speeds, it generates heat, causing the materials to deteriorate or harden." "I want to quickly prototype and evaluate new materials or produce small quantities of various items easily." In this seminar, we will provide not only the fundamental information about Awatori Nentaro but also the latest updates. During the live demonstration, we will clearly explain how actual materials mix and the operation screen of the Shinky temperature management solution app. Additionally, we will have equipment and optional products on display in the venue, allowing you to consult while viewing the actual items. In the seminar, you will learn about: - The mixing mechanism and examples of Awatori Nentaro - Stirring methods and heat generation countermeasures according to material viscosity - The latest automation models and syringe filling technology After the seminar, we will hold an open consultation session at the venue for anyone interested. Please register early!

Hakkou Co., Ltd. will be exhibiting at the 3rd Kyushu Semiconductor Industry Exhibition. At this exhibition, we will showcase our gas-compatible hoses for cooling lines utilizing our lamination technology. We will also be offering technical consultations on the day, so please stop by our booth.

Hakkou Co., Ltd. will exhibit at the 2026 Medical Creation Fukushima. At the exhibition, we will showcase our series of laminated thin tubes with an inner diameter of φ0.8 to 3 or less, utilizing our unique lamination technology for the first time. We will also hold a consultation session for custom-made products, so if you have any issues with hoses or tubes, please feel free to consult with us. We look forward to your visit.