Notice of Participation in the 46th International Powder Technology Exhibition from November 25 (Wednesday) to November 27 (Friday), 2026.

Suitable for research and quality control of electronic components and materials. Simultaneous measurement of powder resistivity and pressing density.

We would like to introduce the automatic powder resistance measurement system 'MCP-PD600', which has a high-precision pressure control function and can measure the resistivity of conductive powders over a wide range. With the powder probe unit, it is easy to measure the press density and resistivity of powders under pressure, making it suitable for managing the physical properties of powders. We offer configurations tailored to the measurement range, such as the "Loresta GXII" for low resistance measurements and the "Hilesta UX" for high resistance measurements. 【Main Measurement Targets】 ■ Carbon-based powders ■ Metal powders ■ Various other powders *For more details, please download the PDF or feel free to contact us.

• Resistors

Control powder from the perspective of resistivity! Measurement is possible at up to 250 MPa.

The "MCP-PD600" is an automatic powder resistance measurement system that automatically measures the volume resistivity of powders under any pressure simply by setting the probe unit containing the sample. It allows for easy measurement of the pressed density and resistivity of powders under pressure, making it suitable for powder property management. The built-in load cell in the unit accurately monitors loads up to 20kN. 【Features】 ■ All measurements are automatically completed by setting the load and pressing the start button. ■ Newly developed cylinder pump enables measurement at low loads (0.01kN). ■ Measurement up to 250MPa is possible using a high-pressure probe. ■ The use of a suction pump improves the fillability of powders and enhances the reproducibility of pressed density measurements. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Karl Fischer moisture meter. No need for cumbersome PC validation, and the addition of automatic measurement functionality has improved measurement efficiency!

The "CA-310" is a high-performance moisture measurement device equipped with functions compliant with GMP (Good Manufacturing Practice) standards. It achieves a resolution with a quantification limit of 5μg under dry conditions. In addition to the automatic measurement function, improvements in operability contribute to increased work efficiency. With wireless connectivity, the measurement unit can be operated remotely from the control unit, and the device status can be checked using mobile devices such as tablets. Moreover, by simply replacing the cell, it can accommodate a wide range from low to high concentrations. 【Features】 ■ SOP (Standard Operating Procedure) creation support function The steps taken can be output as text data or image data. ■ Convertible function It can be widely used for samples with varying moisture content, from high to low. ■ Barcode reader Information about reagents (Aqua Micron) can be automatically registered using commercially available barcode readers. (Reagent name / Lot number / Reagent expiration date, etc.) We will be exhibiting at "CPhI Japan 2025 (International Pharmaceutical Development Exhibition)" held from April 9 (Wednesday) to April 11 (Friday). *For more details about the product, please download the PDF document or contact us. *Feel free to reach out with any questions or inquiries.

• Other measurement, recording and measuring instruments

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.