We will be exhibiting at the "2026 Nagasaki Waterworks Exhibition" held from October 21 (Wednesday) to October 23 (Friday).

Magnetic coupling type that allows precise injection without liquid leakage for sodium hypochlorite, PAC, caustic soda, concentrated sulfuric acid, and more!

Injection of sodium hypochlorite, PAC, caustic soda, concentrated sulfuric acid, etc. with <non-pulsating> <quantitative> injection and <wide-range> flow control! With a magnet coupling type that prevents liquid leakage, it accurately injects chemicals in precise quantities from small to large volumes. Since liquids are transported with bubbles, there is no gas lock. Due to the wide flow control range of a single unit, there is no need to use multiple pumps even if the injection amount fluctuates, and control linked with a flow meter can be easily performed. ○ No gas lock occurs. ○ Flow control of up to 1:250 is possible. ○ There are no shaft seals, preventing liquid leakage. ○ Can be used with sodium hypochlorite concentrations from 1% to 12%. ○ The structure is designed to minimize injection failures due to scaling. ○ Improved maintenance and extended lifespan have been achieved. ○ A type that allows easy insertion into the line is also available.

• Positive Displacement Pump

High-concentration continuous quantitative transfer of easily flushable powder with a small amount of air.

Gentle transport of easily agglomerating powders like toner without altering their properties! Achieves significant energy savings as the power required is about one-third compared to air transport. The amount of air used is also 1/50 to 1/100, eliminating the need for large solid-gas separation equipment. [Transport Examples] Chemicals: Carbon black, silica, fumed silica Electronics: Toner, carbon black Environment: Powdered activated carbon, quicklime [Features] ● Power consumption is about one-third compared to air transport, achieving significant energy savings ● No need for large solid-gas separation equipment at the transport destination ● Flexible piping and installation planning, making it easy to relocate installation sites ● Minimal dust improves the working environment

• Powder Conveyor Device
• Powder Pump

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.