We will be exhibiting at "CEATEC 2026" from October 13 to 16 | Awarded the "Innovation Award" at CEATEC AWARD 2026 (iCrystal)

Processing accuracy that allows for the omission of post-processing, exceeding the target! A case that demonstrates the value of collaboration between AI and humans!

In power semiconductors like GaN, even the smallest roughness at the nanometer level (one-millionth of a millimeter) can affect performance, making crystal processing after creating a cylinder essential in traditional methods. To find appropriate experimental conditions, it is necessary to conduct experiments with at least two different conditions for each factor, meaning that for five factors, a minimum of 32 experiments is required. Based on those trends, we try dozens of experimental conditions to find the combination of factors that leads to the desired results. Therefore, traditional optimization methods centered around experiments required a significant number of trials. In contrast, the approach taken by Aicrystal, which learns from results, explores, and suggests conditions, was able to reduce the number of experiments to just 19. Moreover, this approach achieved a level of processing precision that allowed for the omission of later processes, and the benefits of not needing additional capital investment are significant. The conditions deemed appropriate here were combinations that had never been tried by engineers, showcasing the value of collaboration between AI and humans. *For more details, please refer to the PDF document or feel free to contact us.*

• Other analyses
• Analysis Services
• Other services

Significantly reduce calculation time! Introducing case studies of process informatics!

"GaN (gallium nitride)" is a power semiconductor that is expected to be adopted as a power source for 5G base stations. It is commonly used as a thin sliced disc wafer, but the initial manufacturing state is cylindrical. The GaN cylinder emits gas, which serves as the raw material for GaN, from holes at the bottom, allowing the crystals to grow. In reality, there are over 100 holes, providing infinite combinations. Simulating this takes an astonishing 6 hours for just one condition. If you run 1000 variations, it consumes 6000 hours, which is equivalent to 250 days. This is where "Process Informatics" from AICrystal comes into play. By training AI on the results of 1000 randomly generated simulations, the calculation time is significantly reduced. The time required is just 1 second per condition. Thanks to the substantial reduction in calculation time enabled by AI, it is now possible to calculate 10,000 conditions in just about 3 hours. This optimization allows for the gas conditions and hole arrangements to be fine-tuned, successfully tripling the growth rate. *For more details, please refer to the PDF document or feel free to contact us.*

• Other analyses
• Analysis Services
• Other services

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.