Vibration-damping resin pipe clamp series wins the Good Design Award for the 2026 fiscal year.

For positioning and preventing misalignment of pipes.

■ For positioning and preventing misalignment of pipes Various pipes and poles can be clamped and secured. *Note: Misalignment may occur depending on the load and material of the pipe. ■ Excellent holding power The inner side is bonded with vibration-damping rubber, which helps with anti-slip, vibration assistance, and preventing scratches on the pipe. *Note: This product alone does not provide a clear reduction effect on vibration transmission rates. ■ Gap will open When installed on a pipe of appropriate size, it opens approximately 10mm. ■ Easy installation Due to the material's moderate flexibility and strength, it can be easily removed or attached from the middle of the pipe. ■ Safe for wet areas and outdoors Uses weather-resistant grade polypropylene resin for the base material. It also excels in corrosion resistance and electrical insulation. ■ Rich color variations (up to 8 colors) - Black, White, Gray, Light Gray - Silver, Milky, Ivory, Chocolate ■ Wide range of sizes (over 60 sizes) Compatible pipe outer diameter: 8φ to 106φ *Approximately 1mm increments *Please contact us separately if size adjustments are needed.

• Vice Clamps

For supporting camera mounts and ceiling-mounted piping.

■Multipurpose It serves as a suspension bracket for horizontally running pipes hung from the ceiling, as well as a pipe mount for cameras and other filming equipment. ■Selectable Bolt Diameter Available in W3/8 or M10. ■Excellent Holding Power The inner side is bonded with vibration-damping rubber, which helps prevent slipping, provides vibration assistance, and protects pipes from scratches. *This product alone does not have a clear effect on reducing vibration transmission rates. ■Lightweight Made from a very light material, it reduces the energy required for movement. ■Easy Installation Due to its moderate flexibility and strength, it can be easily removed or attached from the middle section of the pipe. ■Safe for Wet Areas and Outdoors Utilizes weather-resistant grade polypropylene resin for the base material, which is excellent in corrosion resistance and electrical insulation. ■Rich Color Variations (up to 4 colors) - Black, White, Gray, Light Gray ■Wide Range of Sizes (over 60 sizes available) In addition to sizes that match various piping standards, it fits perfectly on various cylindrical objects. *Size (A): 8φ to 106φ, approximately in 1mm increments.

• Vice Clamps

For supporting and stabilizing vertical pipes.

■Support and Bracing for Vertical Pipes Ensure height from the wall surface and use as a support bracket (vertical band) for bracing the vertical pipe. ■Outstanding Holding Power The adhesive rubber with internal ribs helps prevent slipping, provides vibration damping, and protects the pipe from scratches. ■Selectable Bracket Sizes - 16φ×50L/100L/150L → Standard sizes - 20φ×75L/125L → For sturdier installations *For sizes 66.7φ and above, only 20φ×100L/150L is available. *White and light gray are available in sizes 200–300L. ■Height Adjustment Available The bracket can be easily cut to adjust to your desired height. ■Easy Installation Due to the material's moderate flexibility and strength, it can be easily removed or attached from the middle section of the pipe. ■Rich Color Variations (Up to 8 Colors) - Black, White, Gray, Light Gray - Silver, Milky, Ivory, Chocolate ■Wide Range of Sizes (Over 60 Sizes) Matches piping standards for gas pipes, PVC pipes, copper pipes, coated steel pipes, and cross-linked polyethylene pipes. *Size (A): 8φ to 106φ *Approximately in 1mm increments.

• Vice Clamps

Support and fix the pipe by raising it up.

■Lift and Support/Fix the Pipe Lift the pipe by 35mm from the mounting surface such as walls or floors to support and fix it. Used as vertical piping fittings, support fixing fittings, and anti-tipping fittings. ■Outstanding Holding Power The vibration-damping rubber with internal ribs is bonded, which helps prevent slipping, provides vibration assistance, and protects the pipe from scratches. ■Adjustable Range There is a 5mm adjustable range in the vertical direction (upper side), allowing for fine height adjustments. ■2D Screw Holes Can be screwed in vertically or diagonally. ■Easy Installation Due to the material having moderate flexibility and strength, it can be easily removed or attached from the middle part of the pipe. ■Safe for Water Areas and Outdoors Uses weather-resistant grade polypropylene resin for the base material. It also excels in corrosion resistance and electrical insulation. ■Rich Color Variations (up to 8 colors) - Black, White, Gray, Light Gray - Silver, Milky, Ivory, Chocolate ■Wide Range of Sizes (up to 50 sizes) Matches piping standards for gas pipes, PVC pipes, copper pipes, coated steel pipes, and cross-linked polyethylene pipes. *Size (A): 8φ to 54φ

• Vice Clamps

Fix two pipes in parallel and perpendicular.

■ Fixing two pipes in parallel or orthogonally Used for pipe support with glasses bands, connecting brackets, and anti-tipping brackets for sway prevention. ■ Compatible with different diameters By rearranging the resin pipe clamps, it can accommodate pipes of different sizes. ■ Excellent holding power The anti-vibration rubber with grooves is adhered to the inside, helping to prevent slipping, provide vibration assistance, and protect pipes from scratches. ■ Selectable bracket sizes - 16φ×50L/100L/150L → Standard sizes - 20φ×75L/125L → For sturdier installations * For sizes 66.7φ and above, only 20φ×100L/150L is available * White and light gray are available in sizes 200-300L only ■ Length adjustment available Brackets can be easily cut to adjust to your desired length. ■ Angle adjustment available Since the brackets and cap joints do not have threaded grooves, they can be adjusted to any angle for use. ■ Rich color variations (up to 7 colors) - Black, White, Gray, Light Gray - Silver, Milky, Chocolate ■ Wide range of sizes (over 60 sizes available) * Size (A): 8 to 106φ

• Vice Clamps

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.