Compatible horns for other manufacturers' welding machines! Horn production campaign in progress.

A servo press ultrasonic welding machine capable of achieving stable welding is now available, featuring tool-free stack replacement!

After 11 years since the release of the ultrasonic servo welding machine in 2010, Duquesne's ultrasonic servo welding machine has been reborn! The servo motor has been upgraded, maintaining the maximum load while increasing the speed of the up-and-down stroke, thereby shortening the cycle time. In addition to the patented melt detection function, speed profile function, and double hold control function that can also be used with previous models, it is equipped with more advanced welding control features such as load detection control and load increase rate control. The front of the press unit features a status screen that displays the condition of the device, allowing operators to grasp the current situation at a glance by showing various information. The smart stack quick change system enables tool-free stack replacement, achieving significant time savings during changeovers.

• Resin processing machine
• Sealing machine

The P220 and P215 series, which encompass features to achieve stable ultrasonic welding, offer a wide range of options to accommodate various products.

The new basic model series P220/P215 from Duquesne offers options equipped with features such as time control, energy control, peak power control, as well as distance control functions for welding distance and welding end position control. The load trigger mechanism has also been upgraded to a specification that detects actual load using high-end load cells, and even the standard model has transitioned from the traditional analog volume adjustment to a digital method using numerical input from the oscillator, improving reproducibility during step changes. The data output function, which was not supported in the previous i220 series, is now available through the use of the iQ-Explorer3 software. Additionally, when used in automatic machines, there is an iQLinQ communication function option that allows for complete control and monitoring from the device's PLC. Previously, external PLCs could only switch the welding conditions saved in the oscillator, but with iQLinQ, it is now possible to rewrite each parameter, significantly enhancing the compatibility between automatic machines and ultrasonic welding machines. Models are available for all frequencies of 15/20/30/35/40 kHz, allowing customers to choose the specifications that best suit their products.

• Resin processing machine
• Sealing machine

The digital control ultrasonic oscillator that achieves stable ultrasonic sealing in packaging machinery supports high-speed operation and enhances the reliability of the sealing device.

To achieve a stable seal, a stable ultrasonic oscillator is essential. Duquesne's ultrasonic oscillator for automatic machines uses the same digital oscillation circuit as high-end models and is a low-cost oscillator that incorporates only the functions necessary for use in automatic devices. It is equipped with all the necessary features for stable welding, including auto-tuning of frequency, line regulation, load regulation, external amplitude control functions, and various I/O signals. Additionally, by utilizing Duquesne's proprietary iQ-LinQ (Ethernet/IP or RS232) connection, all control and monitoring can be done with a single cable to the PLC, reducing wiring labor and expanding the flexibility of ultrasonic welding control.

• Resin processing machine
• Food Cutting Equipment
• Sealing machine

Eliminate manual variations with output triggers of patented technology and oscillation energy control!

The handheld ultrasonic welder "iQ HP-E" series improves the variability of welding conditions caused by differences among operators through patented technology for output triggering and oscillation energy control, enabling stable spot welding and riveting. The color LCD screen now supports Japanese display, making it even easier to use.

• Resin processing machine
• Textile Processing Machinery

The Hino Smart Cabinet provided by Nichinichi Shimizu Machinery Co., Ltd. is a material management solution that allows for the management of factory tools and consumables like a vending machine. This system automates inventory management and ordering processes, preventing the risk of production stoppages due to stockouts and significantly reducing the burden of inventory tasks. The cabinet comes in various types, such as drawer-type and spiral-type, allowing for the proper storage of drills, measuring instruments, protective gear, and more according to their intended use. Furthermore, the history management function through user authentication accurately tracks "who took out what and when," contributing to loss prevention and cost reduction. Operating 24/7 with no maintenance required, it is introduced as an efficient tool to promote the digital transformation (DX) of factories.

As we approach the season when temperatures drop, we invite those considering monitoring in "places where cameras are difficult to place," such as changing rooms and restrooms. The camera-free monitoring sensor "MotionCatch" detects human movement using millimeter-wave radar and AI. Since it does not record video, it can be placed in locations where installing a camera is challenging, such as changing rooms and private spaces. 【Capabilities】 - Detects falls and prolonged inactivity, sending notifications to the responsible person's PC or smartphone. - Can be used to monitor presence/absence and entry/exit. - Simply install on walls or ceilings. No wiring work is required (USB powered and Wi-Fi). - The detection range of one unit is approximately 6m x 4m, making it suitable for monitoring on a "room-by-room" basis rather than the entire floor. We are accepting inquiries regarding site condition checks and trial installations (Proof of Concept) in care facilities, public facilities, and accommodation facilities. *No video is recorded. This product is designed to assist in monitoring and is not a medical device. There may be instances where notifications do not reach you, and it is not a substitute for human observation.

In civil engineering sites, not only the strength and workability of the ground plates but also the management of materials after installation is important. Steel plates can potentially be converted into metal scrap, and in some locations, theft prevention measures may be necessary. Particularly in sites with little human traffic at night or in places where many ground plates are stored, the burden of management can increase significantly. Hyper CLT ground plates are wooden lightweight ground plates made from CLT, which is laminated wood in a perpendicular direction. Because they use wood, they are less likely to be targeted for metal theft compared to steel products, making it easier to manage materials in certain locations. A 5×10 plate weighs about 230 kg, while a 5×20 plate weighs about 460 kg. They can be utilized in temporary roads, access routes, heavy machinery work yards, material storage areas, and temporary parking lots. Of course, being wooden does not mean there is no concern about theft. Management tailored to the site environment is necessary. Hyper CLT ground plates are registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS as "TH-250021-A." Wooden ground plates, NETIS, civil engineering, CLT, wooden lightweight ground plates. From the perspective of protecting materials, we propose a new option.

B-Core Inc. will exhibit at the "6th Construction DX Exhibition [Tokyo]" held at Tokyo Big Sight from December 2 (Wednesday) to December 4 (Friday), 2026. The theme for this time is "Portable Site DX." We plan to introduce site-oriented solutions utilizing AI cameras and sensors, including a suitcase-type vehicle monitoring system and measurements of noise, vibration, and dust. ■ Exhibition Information https://bcore.biz/news/2026-10-06 ■ Our Company Invitation Visitor Badge (Pre-registration) https://www.japan-build.jp/tokyo/ja-jp/register.html?code=1800565883702314-WCL We look forward to your registration and attendance.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.