Notice of Participation in POWTEX 2026, the 46th International Powder Technology Exhibition

A diagnostic device that digitizes and visualizes the condition of pipelines using sound.

In the energy industry's pipeline monitoring, early detection of anomalies and predictive maintenance are required. Particularly in long-distance pipelines, visual inspections are often difficult, making sound-based condition assessment crucial. However, traditional sound diagnostics heavily rely on the experience and senses of the workers, posing challenges for objective judgment and information sharing. The electronic sound rod Kirari Muse addresses these issues by digitizing the operational sounds of rotating equipment and visualizing the condition, enabling anyone to easily diagnose equipment status without relying on specialized experience. 【Usage Scenarios】 - Detection of abnormal sounds in pipelines - Monitoring operational sounds of rotating equipment such as pumps and compressors - Predictive maintenance of facilities 【Benefits of Implementation】 - Objective diagnosis possible without specialized knowledge - Visualization of condition through graphing of sound data - Sharing and standardization of sound data that were previously difficult - Reduction of unexpected troubles and maintenance costs

• Other measurement, recording and measuring instruments

Of course, hydraulic, air, electricity, as well as toothpaste, powder pellets, chocolate, vacuum, alcohol, and more! We achieve piping connections and switches in various industries.

Using auto connectors (auto couplers, auto joints) leads to: - Increased productivity... Automation and reduced setup time enhance production efficiency. - Realization of FMS... Remote operation becomes possible. - Improved safety... There is no need to approach dangerous areas. - Improved safety 2... Automation of switching piping lines for hazardous materials (such as hot water and hydrochloric acid) enhances worker safety by eliminating dangerous tasks. - Environmental improvement... Work in high-temperature, high-humidity, or dirty areas is eliminated. - Enhanced reliability... Prevents incomplete connections and human errors. - Energy savings... There is almost no external leakage during connection and disconnection. - Factory cleanliness... Hoses and wires do not get tangled, and floors are not contaminated with oil or water. Nabtesco Service has accumulated over 50 years of know-how in automatic connection and disconnection (piping and wiring). We have addressed issues such as misalignment during connection, response to reaction forces, handling of special liquids and powders, automation of production lines where metal (ions) leaching is undesirable, and automatic connection and disconnection of high currents. We have confidently provided custom solutions for special environments! If you have any concerns about automation, please feel free to consult us.

• Other process controls

Piping automatic connection and disconnection device (auto connector): Fully automating valve operation from transport to supply.

Containers and tanks transported by conveyors or AGVs. Are you stopping your work just to open and close valves or connect power? By introducing our "Automatic Pipe Connection Device (Auto Connector)," it is possible to automate everything from valve operation to air supply and electrical wiring connections. Benefits of Implementation: Increased Efficiency through Automation: Connection is completed the moment the container is placed in the designated position, eliminating all manual work. Versatile Compatibility: One device can handle air piping for valve operation, air for driving knockers and vibrators, and even power (electrical wiring) connections and disconnections. Elimination of High-Risk Work: For example, in the supply of raw materials to high places, the dangerous task of opening and closing valves previously performed by workers at height is no longer necessary. Usage Scenario: Gravity Supply Sites In sites where raw materials are transported to high places in containers and manufactured by utilizing gravity to drop them to lower levels, workers had to climb to heights for valve operation every time a container arrived. With the introduction of the Auto Connector, connections are completed simultaneously with the arrival of the container, freeing workers from dangerous high-altitude tasks and improving the safety and production efficiency of the manufacturing line.

• Pipe Fittings
• Piping and Piping Parts
• Piping Materials

Automate the attachment and detachment of pipes and hoses, as well as the switching of lines, to reduce costs. There is no need to worry about cross-contamination.

The "Automatic Pipe Switching Device" is a system that allows for automatic switching of pipes (hoses) regardless of pipe size or number by driving an integrated mobile unit equipped with an automatic detachable connector in the X and Y directions. By switching from conventional automatic valves or valve blocks, it eliminates concerns about cross-contamination due to internal leaks, contributing to cost reduction and minimizing product loss. We offer custom-made solutions from connectors to devices, providing products tailored to needs such as explosion-proof specifications and outdoor use. 【Features】 ■ Proven track record in manufacturing processes involving high-viscosity materials, powders, and chemical liquids. ■ No worries about product loss due to incorrect connections. ■ Reduces the need for regular maintenance for preventive care. ■ Contributes to the reduction of cleaning water usage and product loss (SDGs). ■ Enhances production efficiency, automation, factory automation, and unmanned operations. ■ No risk of cross-contamination. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• others

The connection work of the Heller joint is now "4 seconds with one hand"!

Quitto has been adopted at a food manufacturing factory. The hose connection between the tank and the filling machine required the removal and attachment of the hose clamp every time the filling material was changed in order to clean the hose. Traditionally, this removal and attachment process of the hose clamp took about 20 seconds to 1 minute. Additionally, when reattaching it to the piping after cleaning, there were instances where the gasket would fall to the floor, necessitating another cleaning, leading to time loss during setup changes and piping cleaning. Our Quitto can be easily attached and detached with one hand by anyone. Its unique structure allows for the attachment of a large gasket while pressing it in place, completing the attachment and detachment process in just a few seconds. Since the gasket is securely fixed to the piping, the risk of dropping it on the floor during attachment is almost eliminated. By using it at existing hose clamp connection points where frequent attachment and detachment occur (such as at the end of hoses), it contributes to increased productivity and safety. We also have demo units available, so please feel free to reach out if you're interested. This product is a new development in collaboration with PACRAFT, a packaging machine manufacturer (part of the same Nabtesco group as us). *Patent, trademark, and design applications have been filed.

• Pipe Fittings

Reduce the filling machine's Heller clamp attachment and detachment work to 4 seconds! Moreover, with one hand.

We have introduced an automatic filling machine in a factory that handles OEM for cosmetics. Previously, when cleaning hoses, the process involved attaching and detaching with a heel clamp, which particularly for those who are not skilled, posed several issues: - It took a long time to attach and detach. - It was not securely clamped, leading to leaks. - Gaskets were dropped on the floor during installation. - There were risks of cuts and other injuries. These tasks were cumbersome and the fear of injury sometimes led to part-time workers leaving their jobs. Since this factory is located in a rural area, they also struggled to hire replacement staff. The new product, Quitto, allows anyone to easily attach and detach with one hand! *This new product was co-developed with PACRAFT and is currently under patent and trademark application. With its unique structure, it presses a large gasket while being installed, completing the attachment and detachment process in just a few seconds. Additionally, since the gasket is securely fixed to the piping, the risk of dropping the gasket on the floor during installation is almost eliminated. By using it in existing heel clamp connection points, especially in areas with frequent attachment and detachment (such as the end of hoses), it contributes to increased productivity and safety.

• Pipe Fittings

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.