It has been published in the "Tokyo Industrial Location Navi."

Ideal for inline inspection, MEMS scanner inspection system.

This is an inspection device for measuring the optical and electrical characteristics of MEMS optical scanners, designed for production lines and research and development. It is capable of measuring resonant-type resonance characteristics and drift. A new time measurement method allows for reduced inspection cycle times for maximum swing angle measurements. The interface can be electromagnetic drive, electrostatic drive, or piezoelectric drive. Its compact design makes it ideal for inline inspection. ○ Wobble measurement (triangular slit time variation detection method) Measurement resolution: 1 micrometer Measurement range: 30 minutes Beam speed: less than 4000 m/s ○ Jitter measurement (two-point time interval detection method) Set position: arbitrarily set (plus or minus 50 degrees) Measurement resolution: 0.1 ns ○ Maximum swing angle measurement: measurement resolution 0.1 ns ○ Resonant frequency: measurement resolution 0.1 ns ○ Temperature: measurement resolution 0.1 degrees

• Other measurement, recording and measuring instruments
• Optical microscope
• Image Processing Equipment

MEMS Scanner Measurement System ALT-9A44

This is an introduction to the "MEMS Scanner Measurement System ATL-9A44" for measuring the optical and electrical characteristics of MEMS optical scanners. 【Features】 - Measures the optical and electrical characteristics of MEMS optical scanners - Capable of measuring resonant type resonance characteristics and drift - New time measurement method for maximum swing angle measurement reduces inspection cycle time - Interfaces available for electromagnetic drive, electrostatic drive, or piezoelectric drive - Compact design ideal for inline inspection *For other functions and details, please download the catalog or contact us.

• Optical Measuring Instruments

Compact, energy-efficient, and long-lasting. Ideal for production lines with a compact design.

The optical MEMS scanner system features compact size, low power consumption, and long lifespan, which are not found in traditional mechanical scanners. Additionally, it can be configured for both one-dimensional and two-dimensional scanning in a single unit, making it applicable for displays and measurements. For more details, please contact us or refer to the catalog.

• Optical Measuring Instruments

Features: ● Equipped with Intel Core Ultra 9 285H/7 255H/5 225H ● DDR5 SODIMM x 2 (up to 128G) (sold separately) ● VGA Switch DDI x 1, LVDS colay eDP x 1, DDI x 2 ● USB 2.0 x 8, USB 3.2 Gen 2 x 4 ● PCIe [x1] x 4, PCIe [x4] x 1, PEG [x8] + [x4] + [x4] ● 2.5GbE x 1 ● COMe Type6 standard, 95mm x 95mm size ● Operating temperature -20~70℃ ● Sold separately ECB-920A: Development carrier board COM-MTHC6-FAN01: CPU fan COM-MTHC6-HSP01: Heat spreader (※ Heat dissipation is required in the enclosure)

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Processor: Qualcomm QCS6490 with Arm Cortex-A78 ×4 + Cortex-A55 ×4 (Octa-core) up to 2.7GHz ● LPDDR5 onboard memory (up to 8GB) ● Display: MIPI-DSI (4 lanes) ×1, DisplayPort ×1 ● USB 2.0 ×4 (one port supports OTG), Gigabit Ethernet ×2

In civil engineering sites during extreme heat, the surface temperature of the ground plates and the heat reflection significantly affect the working environment. In particular, steel plates tend to retain heat when exposed to sunlight, posing challenges for workers' heatstroke prevention and safety management. Hyper CLT ground plates are civil engineering materials utilizing wood CLT. As wooden ground plates, they can be used for temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways, making them a versatile alternative to steel plates in various civil engineering sites. In actual sites, there are cases where the surface temperature differs by about 20 degrees compared to steel plates, making them effective as a solution for heat prevention and reflection suppression. The 5×10 plate weighs approximately 230 kg, and the 5×20 plate weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which helps reduce the burden of transportation, installation, and removal. They are materials that easily promote noise reduction, CO2 fixation, and environmental consideration unique to wood. Registered as a Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A," they can also be utilized for creative ideas and safety measures in public works. They are recommended for companies looking to reassess the summer site environment. We also accept inquiries for consultations and requests for materials tailored to site conditions. We can propose solutions for temporary plans during summer for both public and private civil engineering projects. Please feel free to consult with us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.