CPC AseptiQuik G - New Release!

A complete sterile connection can be easily achieved under general conditions.

The aseptic quick connector is a fitting (joint) that allows for easy, rapid, and reliable connection of sterile tubes and tubes even in non-sterile environments. By simply "pushing - pulling - twisting," it enables the transport of drugs easily, reducing the risk of incorrect operations. Additionally, it is built to be very sturdy, ensuring a high level of safety without the need for additional equipment. The disposable connector technology allows manufacturers of biopharmaceuticals and regenerative medicine devices to easily achieve the sterile environments they require. You can watch a video about the aseptic quick connector at the following site: http://www.youtube.com/watch?v=0HkGOFzyGDI

• joint

Completely sterile connection and disconnection is possible!

This is a joint that allows for sterile connection and disconnection easily, quickly, and reliably in non-sterile environments such as factories, hospitals, and laboratories, as well as in disaster areas, remote locations, and mountainous regions where there is no electricity, making it ideal for sterile handling. * It reduces the risk of operational errors since the drug solution can be transported easily by simply "pushing, pulling, and turning." * It has a robust structure that ensures very high safety without the need to add other equipment. * This disposable connector technology allows bio-related manufacturers to easily create a sterile environment anywhere. * For instructions on using the aseptic quick connection joint, please visit http://www.youtube.com/watch?v=0HkGOFzyGDI.

• joint

For regenerative medicine and diagnostic drugs! We have developed a small sterile connection fitting. (It can also be applied for sterile attachment and detachment.)

We have developed a product with a smaller diameter tube compared to conventional aseptic connection fittings. This product allows for the aseptic transfer of liquids, even in small quantities. It can be used for various applications such as cell therapy, antibody production, small-scale protein formulations, and clinical trials. Since this product does not require aseptic connection equipment, it enables aseptic drug transfer in locations without power (outdoors, disaster areas). In hospitals, nurses do not need to learn how to operate the equipment, allowing for aseptic connections without initial investment. Additionally, CPC also sells aseptic disconnect joints. When combined with aseptic disconnect joints, it enables aseptic connection and disconnection, allowing for repeated aseptic transfers. For more detailed information on aseptic attachment and detachment, please contact the CPC Japan office. You can watch a video about Aseptic Quick S at the following site: http://www.youtube.com/watch?v=0MTO-Z58leM&feature=youtu.be

• joint

More freedom in connecting stainless steel piping and sterilization tubes! (Aseptic connection connector for piping + aseptic connection joint for tubes = Steam Through)

SteamThru, which allows for the sterile connection of stainless steel piping and bags, has become an indispensable product in the biopharmaceutical industry and is widely used around the world. We have launched AseptiQuikSTC, a product that combines the sterile connection connector SteamThru with AseptiQuik, which allows for the sterile connection of tubes under general environmental conditions. Previously, it was necessary to connect all bags and tubes to SteamThru in advance and sterilize them, but with the launch of AseptiQuikSTC, it has become possible to freely make sterile connections between stainless steel piping and sterile tubes or sterile bags equipped with AseptiQuik.

• Other bio-related factory equipment and parts
• Piping
• Piping and Piping Parts

Aseptic quick connection for 1-inch diameter tubes. Complete sterile connections can be easily made under general conditions.

The CPC AseptiQuik X connector is a connector for tubes with a maximum diameter of 1 inch that allows for easy, quick, and reliable sterile connections between tubes even in non-sterile environments. By simply "pushing, pulling, and twisting," it enables the transport of substances easily, reducing the risk of incorrect operations. Additionally, it is designed to be very robust, ensuring a high level of safety without the need for additional equipment. The single-use connector technology allows manufacturers of biopharmaceuticals and regenerative medicine devices to easily achieve the sterile environments they require.

• joint

Genderless sterile connection connector without male or female! Stock halved! Maximum high-temperature pressure resistance.

Revolutionary! A sterile connection connector without male or female parts! It can connect to any component, reducing inventory by half! Industry-leading high-temperature and pressure resistance. The "G" in AseptiQuik G stands for Genderless. With a symmetrical structure, it can connect without male or female parts, eliminating issues where bags with male connectors cannot connect to each other. Since there is no distinction between male and female, it can connect without the need for bags with male or female parts. When connecting, it always notifies you of completion with two click sounds. The structure requires clipping two membranes together before pulling, preventing issues such as accidentally pulling only one membrane or pulling them simultaneously, which could cause contamination or lead to lot disposal due to contamination concerns. AseptiQuik G is not compatible with AseptiQuik S. It supports tubes of 1/8, 1/4, 3/8, 1/2, and 3/4 inches, and also accommodates 3/4 inch sanitary connections. Additionally, these can be combined with different diameters.

• joint

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In summer construction sites, the surface temperature of the ground plates and the heat reflection can affect the working environment. In particular, steel plates tend to retain heat when exposed to sunlight, making it a challenge to implement heatstroke prevention measures and improve the site environment for workers. Hyper CLT ground plates are civil engineering materials that utilize wood CLT. As wooden ground plates, they can be used for temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways, serving as a versatile alternative to steel plates in various civil engineering sites. In actual sites, there are cases where the surface temperature can differ by about 20 degrees compared to steel plates, making them an easy-to-suggest material for reducing heat reflection and preventing heatstroke in summer. The 5×10 plate weighs approximately 230 kg, and the 5×20 plate weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which also helps reduce construction burdens. Additionally, they feature noise reduction, environmental consideration, and CO2 fixation, which are unique to wood. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," these ground plates are also easy to utilize for innovative ideas and safety measures in public works. Companies looking to improve summer site environments are encouraged to consider Hyper CLT ground plates.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.