General revision of the homepage

Hirai Electric Meter Standard Product: Current withstand 75 times/1 second, overcurrent constant n>10

This is a current transformer for circuits with a maximum voltage of up to 7.2kV/6.9kV. If you require an overcurrent intensity of 75 times/1 second and an overcurrent constant of n>10, you can use this series. It is primarily manufactured in accordance with JIS C 1731-1/JEC-1201, but we can accommodate special specifications such as multiple taps or tertiary windings upon request. Production location: Made in Japan (Kyoto)

• Sensors
• Transformers

Rated withstand current 12.5kA/0.125s and 12.5kA/0.25s current transformer JIS C 4620 (Appendix)

Current Transformers for Cubicle-Type High Voltage Receiving Equipment ECT-S12.5KA Series Common Specifications ■ Compliance Standards: JIS C 4620 (Appendix) ■ Rated Current: 10A/5A, 15A/5A, 20A/5A, 25A/5A, 30A/5A, 40A/5A, 50A/5A 75A/5A, 100A/5A, 120A/5A, 150A/5A, 200A/5A ■ Rated Burden: 10VA or 25VA or 40VA ■ Rated Overcurrent Constant: n>10 ■ Rated Frequency: 50Hz/60Hz ■ Accuracy Class: 1.0/1PS ■ Rated Short-Circuit Current: (1) ECT-S12.5KA-A Series = 12.5kA/0.125s or 12.5kA/0.16s common (2) ECT-S12.5KA-B Series = 12.5kA/0.25s

• Sensors
• Transformers
• Solar power generator

Hirai Electric Meter Standard Product: Current withstand 150 times/1 second, overcurrent constant n>10

This is a current transformer for circuits with a maximum voltage of up to 7.2kV/6.9kV. If you require an overcurrent intensity of 150 times/1 second and an overcurrent constant of n>10, you can use this series. It is primarily manufactured in accordance with JIS C 1731-1/JEC-1201, but we can also accommodate special specifications such as multiple taps or tertiary windings upon request. Production location: Made in Japan (Kyoto)

• Transformers
• Control Panel
• Solar power generator

Hirai Electric Meter Standard Product: Current Resistance 500 times/1 second & 800 times/1 second

This is a current transformer for circuits with a maximum voltage of up to 7.2kV/6.9kV. For overcurrent intensity of 500 times/1 second and overcurrent constant n>10, you can use model ECT-1000A1. For overcurrent intensity of 800 times/1 second and overcurrent constant n>5, you can use model ECT-1000A. The basic design complies with JIS C 1731-1/JEC-1201, but we can accommodate special specifications such as multiple taps or tertiary windings upon request. Place of production: Made in Japan (Kyoto).

• Sensors
• Transformers
• Board materials

Hirai Electric Meter Standard Product: Standard 50VA with Fuse

This is a standard instrument transformer rated for a load of 50VA, suitable for circuits with a maximum voltage of up to 7.2kV/6.9kV. As of 2012, it has a delivery record of 50 years since production began, making it one of the long-established epoxy-molded instrument transformers in Japan. It is primarily compliant with JIS/JEC standards, but can also accommodate overseas standards upon request. Production location: Made in Japan (Kyoto).

• power supply
• Transformers
• Board materials

The glass pot lid has a hydrophilic heat-resistant coating, allowing you to check the cooking state without any fogging.

"Because it's an invisible place, we won't overlook it." Japan's climate is characterized by high temperatures and humidity, and particularly after typhoons and heavy rains, the conditions can be harsh for homes. It's not just the roofs and exterior walls that are affected by rain and wind. The area beneath the floor is actually the most susceptible and often overlooked point. This time, we will explain the "checkpoints for under the floor" that should be confirmed after a typhoon or heavy rain, the "responses" if abnormalities are found, and measures for preventing recurrence. [Table of Contents] ■ Why is underfloor checking necessary? ■ Checkpoints to confirm after a typhoon or heavy rain ■ Responses when damage is discovered ■ Points for preventing recurrence ■ Suggestions from Seihou Products ■ Summary Please be sure to read the [related materials] and [related links]. ↓ ↓ ↓

Explosion-proof motors available in stock We will deliver within 7 days to meet your delivery schedule. 【What is an explosion-proof motor?】 In factories and plants, flammable gases and vapors are present. When these mix with air and come into contact with an ignition source, an explosion or fire can occur. This motor is designed with measures to eliminate such ignition sources. 【Available stock models】 ■ Pressure-resistant explosion-proof motors, explosion-proof grade d2G4 - Foot-mounted type, output 0.4 to 3.7 kW, 4 poles - Flange type, output 0.4 to 0.75 kW, 4 poles ■ Increased safety explosion-proof motors, explosion-proof grade eG3 - Foot-mounted type, output 0.2 to 0.75 kW, 2 and 4 poles - Flange type, output 0.2 to 0.75 kW, 2 and 4 poles

As part of the "Hometown Ibara Future Creation Human Resource Development Project," we welcomed local elementary and middle school students to the special summer program "Ibara Job Exploration Tour 2025," a collaboration between the Ibara City Chamber of Commerce and the Corporate Branding Committee. We conducted a presentation that clearly and enjoyably introduced how our technology supports society, allowing the children to learn about the appeal of manufacturing and the significance of working while interacting with actual devices and products. Through this initiative, we hope to deepen our connection with the community and nurture the curiosity of the children who will carry the future. We sincerely thank everyone who participated, as well as all those involved in planning and organizing the event.

We will disclose the interim financial results for the fiscal period ending December 2025.