Thank you for your patience. We are pleased to announce the release of our "Case Study Collection," which has received a lot of feedback from our customers.

Easy connection joint SKX that does not require inner core insertion or disassembly of fittings.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The energy applied to the pipe is released due to its flexibility.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

Thread cutting processing, dedicated tools for joining, pipe processing, easy connection without welding processing, SKX.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The energy applied to the pipe is released through its flexibility.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

Connection of polyethylene pipes does not require an in-core.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings

The connection of polybutylene pipes does not require an in-core.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

Connection of polyethylene pipes does not require an in-core.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core. It allows energy exerted on the pipe to be released due to its flexibility and expansion.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core. It releases the energy applied to the pipe due to its flexibility and expansion.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core. It allows energy exerted on the pipe to be released due to its flexibility and expansion.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core. It allows energy applied to the pipe to be released due to its flexibility and expansion.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings

The connection of polyethylene pipes and polybutene pipes does not require an in-core.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core. It allows energy applied to the pipe to escape due to its flexibility and expansion.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core. It releases the energy applied to the pipe due to its flexibility and expansion.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core. It allows energy applied to the pipe to be released due to its flexibility and expansion.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core. It releases the energy applied to the pipe due to its flexibility and expansion.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings

The connection of polyethylene pipes and polybutylene pipes does not require an in-core.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The connection of polyethylene pipes does not require an in-core.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The energy applied to the pipe is released through its flexibility.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The energy applied to the pipe is released due to its flexibility. No in-core connection is required for polyethylene pipes.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings

It releases the energy applied to the pipe through its flexibility.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The energy applied to the pipe is released through its flexibility. No in-core connection is required for polyethylene pipes.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings

The energy applied to the pipe is released due to its flexibility. No in-core connection is required for the polybutylene pipe.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The energy applied to the pipe is released through its flexible expansion and contraction.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The energy applied to the pipe is released due to its flexibility.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The energy exerted on the pipe is released due to its flexibility. No core is required for connecting polyethylene pipes.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings

The energy exerted on the pipe is released due to its flexible nature. No in-core connection is required for the polybutylene pipe.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The energy applied to the pipe is released through its flexibility.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The energy exerted on the pipe is released due to its flexibility. No core is required for connecting polyethylene pipes.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings

The energy applied to the pipe is released due to its flexibility. No in-core connection is required for polybutylene pipes.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

• Pipe Fittings
• Piping Materials

The energy applied to the pipe is released through its flexibility.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The connection of polybdenum pipes does not require an in-core.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Pipe Fittings
• Piping Materials

The connection of polybdenum pipes does not require an in-core.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

• Piping Materials

We will be closed from April 29, 2026 (Wednesday) to May 6, 2026 (Wednesday). We apologize for any inconvenience this may cause and appreciate your understanding. *Regarding inquiries made during the closure period, we will respond sequentially starting from May 7, 2026 (Thursday).

This is a notice of a limited-time special price campaign for everyone involved in factory wastewater management. We are offering a series of spectrophotometers that support COD, total nitrogen, and total phosphorus measurements at a special price for a limited time. Additionally, customers who purchase the eligible products will receive a portable pH meter as a gift (limited quantity).

We are pleased to announce that our company will be exhibiting at the following trade show. At our booth, we will propose solutions to challenges in manufacturing environments, such as "sticking," "slipping," "corrosion," and "wear," through various functional coatings, including fluoropolymer and PEEK coatings. If you have any concerns in the field or inquiries about prototype or mass production of coatings, please feel free to visit our booth. We sincerely look forward to your visit. 【Exhibition Overview】 ■ Exhibition Name: Monozukuri World 2026 Machine Elements Technology Exhibition ■ Dates: July 1 (Wednesday) - July 3 (Friday), 2026 ■ Venue: Tokyo Big Sight ■ Booth Number: E6-47 (East Hall 1) 【Main Exhibits】 ■ Fluoropolymer Coatings (PTFE, PFA, FEP, ETFE) ■ PEEK Coating "PEEKCOAT" ■ Ceramic Coating "Biceram" ■ High-Temperature Durable Fluoropolymer Coating "Thermo Pro Release" (for high-temperature release applications such as thermal welding and thermal crimping processes) ■ Thin Film Non-Stick Coating "NonStick STC" (for industrial knives and resin molding molds)

Door frame and door unit that can be installed on the same day. Since it has the same color variations as the steel partition, it allows for a unified design of the space. Three points: Point 1: Can be ordered together with the partition, reducing hassle during arrangement. Point 2: Simultaneous construction of frame and door allows for flexibility in the process. Point 3: No fire method, so there is no concern about risks from sparks.

Thank you very much for visiting our company website and catalog, and for your interest in our diesel engine generators. From customer surveys, we received the following feedback as the most common requests: - I want to see the actual generators that have been installed. - I want to see the operation under actual load. - I want to hear the opinions of companies that have installed the generators. - I want to see the operating generators before making a purchase. After all, it’s understandable to be concerned about purchasing a generator without seeing the actual unit first, right? As the saying goes, "Seeing is believing..." we will be holding this tour. It is located in that area of the Kanto region where the maximum temperature exceeds 40°C during the summer. We successfully operated it again this summer, so we are confident about handling the heat (sweat)... Furthermore, it has been confirmed that it is "fuel-efficient" due to the world-leading "Scania engine" installed. This will surely help reduce daily operating costs. Please note that while we will provide kind and courteous assistance, the meeting point and dispersal will be at the site (transportation costs and other expenses will be borne by the customer), so please understand this in advance. Contact: Kaneko