Battery abnormal temperature detection alarm / New product for battery abnormal temperature alarm system.

Battery abnormal temperature detection alarm / New product for battery abnormal temperature alarm device

■Features of the Battery Abnormal Temperature Alarm 1. Capable of detecting abnormal temperature alarms for each battery. 2. An eco-technology that can detect and alarm abnormal temperatures of each battery with zero standby power. 3. Allows for regular collective monitoring of abnormal heat (abnormal temperature) for each battery. 4. Inspection tasks for battery equipment can be performed by anyone, ensuring reliable and safe maintenance management. 5. Detects abnormal temperatures of each battery and alerts through an alarm system to prevent equipment damage and fire. 6. A product that integrates numerous shape memory alloys at equal intervals along extended wires. 7. Utilizes the softening of wires and the restoration of shape memory alloys to short-circuit between two wires for temperature sensing and signaling. 8. Shape memory alloys have permanent memory, are rust-free, and can be used for many years once activated. 9. Enables direct temperature sensing and signaling through physical operation without the need for power sources or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 11. Can be wired similarly to electrical equipment wires, suitable for both indoor and outdoor wiring. 12. A product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. Non-resettable, allowing for confirmation after activation (once activated, it cannot be reactivated; the activated location can be deleted and reconnected).

• Lithium-ion battery
• Solar power generator
• Power storage device

Optimal safety measures for abnormal temperatures in storage batteries / New product for storage battery alarm systems

■Features of the Battery Alarm System 1. A temperature sensing wire (70°C) is installed on the outer wall of the battery or the power line, enabling monitoring and alarm for abnormal temperatures. 2. The system continuously monitors the battery's abnormal temperature, allowing for early detection and safe response. 3. Inspection and maintenance of the battery equipment can be carried out reliably and safely. 4. This is an optimal "Battery Alarm System" for safety measures against abnormal temperatures in batteries. 5. It is a "Battery Alarm System" that combines a compact alarm panel with a temperature sensing wire (70°C). 6. This product meets the performance standards of a fixed temperature type detector (120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical operation without the need for power or measuring instruments. 2. When the surrounding temperature reaches the set temperature (70°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor installations. 4. The product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy to use, and highly accurate, featuring eco-technology with zero standby power due to its switching function. 6. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location must be removed and reconnected).

• Lithium-ion battery
• Solar power generator
• Power storage device

A new product for temperature sensing (70℃) that enables direct temperature detection and signaling through a physical operation without the need for power.

■Features of Temperature Sensing Wire (70℃) 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches 70℃, the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for the regular monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it enables extensive abnormal temperature monitoring. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates numerous shape memory alloys at equal intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed temperature detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated section can be deleted and reconnected.)

• Sensors
• Sensors
• Safety Sensors

Detecting abnormal heat (abnormal temperature) of the storage battery with standby power at 0 / New product for temperature detection sensors for storage batteries.

■Features of Temperature Detection Sensors for Storage Batteries 1. It can monitor and detect abnormal heat generation (abnormal temperature) of storage batteries on a daily basis. 2. It can monitor and detect abnormal temperatures of the wiring and electrical equipment in the charging/discharging circuits of storage battery systems on a daily basis. 3. Inspection tasks for storage battery systems can be performed by anyone, ensuring reliable and safe maintenance management. 4. By utilizing shape memory alloys (restoration) and wires (softening) to create a short circuit (contact) between the two wires, it detects abnormal temperatures (maximum allowable temperature) and generates a signal. [Set temperature 70°C] 5. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 6. It can simultaneously detect temperature and generate signals, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloys have permanent memory, are rust-free, and maintain their state indefinitely once activated. 8. The operation is a physical action that does not require power, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Direct temperature detection is possible without the need for measuring instruments. 10. It is a non-resettable type that allows for confirmation after activation. (Once sensing is activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Lithium-ion battery
• Solar power generator
• Fuel Cells

Event Date: October 7 (Wednesday) to October 9 (Friday), 2026 Time: 10:00 AM to 5:00 PM Venue: Intex Osaka Our company will be exhibiting at the 29th Monozukuri World Design and Manufacturing Solutions Exhibition, which will be held at Intex Osaka from October 7 (Wednesday) to October 9 (Friday), 2026. At the venue, we will showcase the upgraded "ReMacs Hybrid," as well as the eagerly awaited production management system for the precast concrete industry, "ReMacs TypePca," which will be unveiled for the first time following its release at the end of May! We will also display various solutions, including the newly equipped "AI Drawing Search System" with OCR functionality! We sincerely look forward to your visit.

In civil engineering sites, it is important to clearly communicate not only safety and workability but also "what kind of initiatives the site is undertaking." Hyper CLT mats are civil engineering mats that utilize wood CLT. They look significantly different from conventional steel plates, so when laid at site entrances, viewing routes, or material yards, they create a strong visual impact. In particular, during inspections by clients, site tours, and public open days for local residents, the use of wood, environmental considerations, and the application of new technologies can be conveyed in a "visible form." Additionally, they are lightweight and easy to install and remove, and they offer practical benefits such as reducing glare and metal noise, as well as CO2 fixation. Hyper CLT mats are registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." They combine wood, NETIS, civil engineering, and CLT, making them a new temporary material that can impressively convey the initiatives of the site.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.