DKSH Japan Co., Ltd. will exhibit at nano tech 2016.

Equipment capable of scaling up (5ml → 100ml → 1,000ml → 10l) with powerful ultrasonic devices equivalent to ultra-high pressure jet mills.

Heilshar Corporation primarily designs and manufactures large, powerful ultrasonic equipment, offering lab equipment, prototype benchtops, and production-level devices. Effective and energy-efficient technology is necessary to harness ultrasonic capabilities. Furthermore, even with ultrasonic technology, the results are entirely different from immersion-type ultrasonic cleaners. It is the high amplitude and high surface intensity of Heilshar's powerful ultrasound that enables this technology. Until now, Heilshar ultrasonic equipment has achieved high output (50,000W) and guarantees 24-hour continuous operation, differing from shear mixers, ultra-high-pressure homogenizers, and stirring bead mills that use shear force. Through 100% cavitation caused by ultrasound, it can achieve what was previously impossible with shear force alone. <Applications> Nano-dispersion of aggregates, reduction of particle size, extraction, emulsification, dissolution, chemical reactions (sonochemistry) <Sectors> Nanomaterials, paints, inks, pigments, fuels, chemicals, cosmetics, biology, food & beverages.

• Other processing machines
• Emulsifier/Disperser
• Fine grinding machine

Can operate continuously for 24 hours in the air (patented), and also capable of continuous operation in liquid for 24 hours. Disperses even strong primary particles with the power of powerful ultrasound, achieving nano-level emulsification.

Are you facing any of the following issues with nano-level dispersion and emulsification? Please feel free to consult us. • I want to use a powerful ultrasonic dispersion machine. • I want to achieve dispersion with minimal contamination. • I am considering scaling up from lab equipment. • I want to achieve even finer dispersion than now. This is a powerful ultrasonic processing device for dispersion, emulsification, and homogenization in liquids. It has zero heat generation, is compactly designed, and can operate continuously for 24 hours. Additionally, it can operate in air (patented), allowing for new applications in the atmosphere. For more details, please refer to the PDF materials or feel free to contact us.

• Emulsifier/Disperser
• Fine grinding machine
• Homogenizer

A high-impact wave ultrasonic processing device with an amplitude of over 50 microns is significantly different from an ultrasonic cleaning machine. It guarantees continuous operation for 24 hours and also guarantees continuous operation in the air.

The Heelscher-made "Ultrasonic Treatment Device" guarantees continuous operation for 24 hours. By minimizing internal heat energy loss to nearly zero, there is no overheating of the equipment, which has been a weakness of ultrasonic devices. Internal air cooling is not required. Guaranteed continuous operation for 24 hours even for laboratory equipment. The industrial equipment model with 16,000W also guarantees continuous operation for 24 hours as a production model. It has a wide range of applications including nano-dispersion, re-agglomeration prevention, nano-emulsification, cell disruption, and extraction. It is utilized in numerous fields such as chemistry, electronic materials, pharmaceuticals, cosmetics, food, and biotechnology. 【Features】 ■ Overwhelming output of up to 16,000W (for standalone equipment) ■ Capable of continuous operation in the air (patented) ■ Guarantees continuous operation for 24 hours *For more details about the product, please refer to the "catalog." Feel free to inquire about "demo tests" as well!

• Other processing machines
• Emulsifier/Disperser
• Fine grinding machine

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.