Notice of Participation in the Chubu Lifeguard TEC 2016 "4th Disaster Prevention, Mitigation, and Crisis Management Exhibition" (Ended)

Even with a sudden guerrilla downpour, the panel is set up just by "placing it"! Compared to sandbags, the installation time is 1/20! The water-stopping performance is an incredible 100 times!!

Emergency measures for sudden guerrilla downpours are ideal for preparations before typhoons and the rainy season! "Okudake" is an easy-to-install, low-cost waterproof panel. Thanks to its aluminum panel's three-part structure, each panel is lightweight, allowing for quick and easy installation by simply "placing" the panels when needed. ◇ Features of "Okudake" ◇ ● Installation of the waterproof panels is easy as they can be stacked in three layers and "placed" without any hassle. ● Each panel weighs about 6 kg (for W2m), enabling speedy installation. ● Can be installed not only on flat surfaces but also on slightly uneven tile blocks. ● Existing shutter rails in garages can be utilized as is. ● Supports up to five panels in a row with a maximum opening width of 10m using middle columns. * Ideal for entrances of stores, apartments, office buildings, and garage shutters. ◇ Features of "Okudake W (Wide)" ◇ ● Basic performance is almost the same as "Okudake," and it can be installed without middle columns for widths up to 3m. ● Supports up to 6m opening width with two panels in a row using middle columns. * Suitable for residential parking entrances and apartment entrances with an opening width of up to 6m. ◇ For more details, please contact us or refer to the catalog.

• Other office supplies

It is a waterproof board (water stop board) that can be easily installed with a single button suitable for the entrance and exit of the store.

The Apia Guard Osudake has a waterproof panel stored at the top, allowing for easy setup in case of emergency by simply pressing the button on the manual handle box labeled "Osudake." After use, it can be easily stored by winding it up with the handle. The panel of the waterproof board uses a transparent resin panel, so when stored, it maintains a neat appearance without hiding the sign or the transom. For more details, please contact us or refer to the catalog.

• others

If you're preparing for both fires and earthquakes, choose lightweight, unbreakable, and non-shattering! The fireproof sheet smoke barrier, Smobaria. The "Slim Panel Type" is now newly available!

This is a smoke curtain wall that adopts a lightweight, non-combustible sheet that does not break, solving issues such as cracking, falling, and scattering during earthquake disasters that are associated with traditional glass materials. ■ Slim Frame The frame has been slimmed down for a neat finish. There are three color options for the frame, allowing for various choices that fit different installation locations. ■ Even Easier Installation Since the panels are modularized, installation work can be carried out quickly. ■ Extremely High Transparency 'Super Clear A' With very high transparency and light transmission rates, combined with the slim frame, it offers excellent design that does not obstruct the space. 【Features】 ◆ High transparency sheet adopted (light transmission rate 90%, haze value 2%) ◆ Slim frame for a neat finish ◆ Speedy installation due to modularized panels ◆ Flexible design that accommodates both new and existing installations ◆ Supports a wide variety of configurations such as L-shaped, T-shaped, and cross arrangements.

• others

If you're preparing for fires as well as earthquakes, choose lightweight, unbreakable, and non-shattering! The non-combustible sheet smoke barrier, Smobarrier.

"Smobaria" is a lightweight, unbreakable next-generation fixed sheet wall. By not using glass, it solves the issues of breakage and scattering during disasters that are common with conventional products. The tension-type with one-touch hooks makes it easy to secure the sheet, and it has a clean appearance without a bottom frame. When configured in a double unit, it can accommodate up to 20 meters.

• others

Zaltrius Japan will be exhibiting at the 98th Annual Meeting of the Japanese Society for Tissue Culture. ◼ Date: August 27 (Thursday) - 28 (Friday), 2026 ◼ Location: 2-8-35 Tai-machi, Nagaoka City, Niigata Prefecture, Hotel New Otani Nagaoka, Venue for the 98th Annual Meeting of the Japanese Society for Tissue Culture ◼ Booth: No. 11 ◼ Exhibited Products: Polyplus High-Efficiency Transfection Reagents NexaGel 3D Cell Culture Matrix Research Growth Factors and Cytokines Basic Cell Culture Media and Reagents Picus 2 Electronic Pipette We have a selection of products recommended for those considering improving research reproducibility and establishing 3D culture environments. Please come and see the actual products and applications at the venue. We look forward to your visit!

We are pleased to announce a co-hosted seminar with Live Consulting Co., Ltd. "Practical Seminar on Microsoft Copilot for Executives and Managers in the Manufacturing Industry" "The new AI tools are no longer needed." This seminar will allow you to experience Microsoft Copilot, which can be used directly within your usual Word, Excel, and Teams, through a demonstration of the actual operation screen. The answers are already within your existing Microsoft 365. You can use AI directly in Word, Excel, and Teams without the need for additional tool selection or new investments, all within the security framework of M365. We will explain the basics to practical applications of Copilot in 90 minutes, specifically for executives and managers in the manufacturing industry. We sincerely look forward to your participation. [Recommended for the following individuals] - Executives and managers in the manufacturing industry who have not yet mastered generative AI/Copilot - Those considering AI implementation but are stalled due to tool selection, security, or promotion systems - Individuals who prefer to see the "actual screen" rather than just "reading" about it - Those who are unable to use ChatGPT in their company due to security concerns.

We will hold a webinar focused on analytical challenges in the research, development, and quality control of biopharmaceuticals, particularly antibody-drug conjugates (ADCs). We are pleased to invite Professor Yuji Ito from Kagoshima University, who will give a lecture on the latest analytical strategies and practical insights in biopharmaceutical research, including ADCs. Target Audience: - Researchers, developers, and CMC personnel from pharmaceutical companies, CDMOs, and CROs - Those considering advanced analytical methods for ADCs and antibody drugs - Individuals facing challenges in improving separation performance, reproducibility, or analytical efficiency - Those considering the implementation of MAM and workflow development Lecture 1 [Special Lecture]: Next-Generation Drug Discovery Using DDS with Tissue-Translocating Antibodies - AccumBody Platform and Antibody Conjugate Technology - Professor Yuji Ito, Graduate School of Science and Engineering, Kagoshima University Lecture 2: Latest LC Column Technology to Solve Challenges in ADC and Antibody Analysis Lecture 3: MAM Practice - An Integrated Workflow from Research and Development to Quality Evaluation * This webinar is a restructured version of the content from the on-site seminar held in July 2026.

Fujikogyo Co., Ltd. will exhibit at the "5th Smart Factory EXPO Autumn" held at Makuhari Messe from September 9 (Wednesday) to September 11 (Friday), 2026. On the day, we will showcase the latest FA and robotics products that achieve automation, efficiency, and labor-saving in the field. [Main Exhibited Products] ◇ Collaborative Robot Palletizing System (Elite Robot Co.) A compact design that is mobile and integrated. It enables seamless loading and easy operation via a tablet. ◇ Autonomous Mobile Robot for Pallet Transport (FEXA Co.) A small and agile AMR. It supports fully automated transportation through shutter and elevator coordination and the use of load sensors. ◇ Automatic Sealing Machine for Packing Tape (EXTEND Co.) Compliant with decarbonization and environmental considerations. It can be used with only power, without the need for air, allowing for use without constraints of location or utilities. We will propose solutions that help solve your challenges. Please visit our booth (Hall 2 / A13-36). *Advance registration (free) is required for attendance.

The organization will hold a seminar titled "EMC Performance of In-Vehicle Devices as Considered by Automobile Manufacturers" on September 16, 2026 (Wednesday), featuring lecturers from Toyota Motor Corporation, Hino Motors, Ltd., and Daihatsu Motor Co., Ltd. In addition to presentations from the three companies, a leading expert on in-vehicle device EMC from our organization will introduce the latest topics. Furthermore, after the seminar, a technical exchange meeting will be held, allowing participants, lecturers, and our organization's technical staff to exchange information. In recent years, the acceleration of autonomous driving, connectivity, and electrification technologies has been aimed at achieving carbon neutrality and evolving mobility. Within this context, it is anticipated that the demands for EMC in electric vehicles (xEV) and fuel cell vehicles (FCV), particularly regarding the electrification of powertrains and EV components, will be stronger than ever. In this seminar, we will invite EMC experts from automobile manufacturers to explain the latest trends in standards regarding the "EMC performance required for in-vehicle devices" to suppliers. We encourage you to take advantage of this opportunity.