[Paper available for download!!] Our paper on advanced simulation technology is published in the August issue of Plant Engineer.

[Presenting case studies useful for seismic evaluation] Supporting seismic evaluation and reinforcement work for high-pressure gas storage tanks (spherical tanks, flat-bottomed refrigerated tanks, etc.)!

For high-pressure gas equipment classified as Importance I and Ia, the Ministry of Economy, Trade and Industry has stipulated the formulation of seismic reinforcement plans in the document "On Improving the Seismic Resistance of Existing High-Pressure Gas Facilities (20140519 Commercial Bureau No. 1)." Our company has been advancing seismic evaluations, studies, designs, and construction for numerous LPG storage tanks owned by the Idemitsu Group. In our studies, we applied the latest knowledge in seismic motion evaluation and developed and introduced new high-precision simulations to accurately assess behaviors such as shaking and deformation during an earthquake. Through these efforts, we have contributed to improving the seismic performance and ensuring the safety of high-pressure gas facilities by identifying reinforcement locations and subsequently selecting appropriate construction methods and carrying out reinforcement work. 【Do you have any of these concerns?】 - I want to proceed with seismic evaluation but need advice on how to do so. - There are multiple pieces of equipment that require seismic evaluation, and I want to address them systematically. - The results indicate that there are more reinforcement locations needed than expected. I want to reconfirm if this is really the case. - Area constraints may pose limitations on seismic reinforcement work. Are there any good methods available? Our experienced engineers will propose optimal solutions for seismic reinforcement. Please feel free to consult with us.

• Mechanical Design

Are you struggling with the integrity assessment of long-standing high-pressure gas piping? Idemitsu Eng. verifies integrity at minimum total cost based on experience in refineries!

Are you unsure where to start with the seismic resistance evaluation of existing high-pressure gas piping amid the increasing risk of major earthquakes? Idemitsu Engineering can confirm the integrity of your equipment at a total cost minimum based on our experience in refineries. 【Features】 - Based on our experience within Idemitsu facilities, we identify weak points in the piping through a walk-down inspection. - We conduct detailed evaluations only on the identified areas, minimizing evaluation costs. 【Benefits】 We can verify the seismic resistance of existing high-pressure gas piping built to past standards, ensuring reliability against future major earthquakes. (As of 2016, evaluation of existing piping is not mandatory, but there is a possibility that it may become mandatory in the future, similar to tanks.)

• Other energy equipment

Are you struggling with the high costs of seismic reinforcement for high-pressure gas facilities? Cost reduction is possible by utilizing Idemitsu's experience and simulation technology!

[Until the end of September] You can download a paper that includes case studies of seismic evaluations of high-pressure gas tanks utilizing our simulation technology! ********************************************* [Overview] Regarding the improvement of seismic resistance for existing high-pressure gas facilities (Commercial Bureau No. 1, 20140519), it is required to formulate renovation plans aimed at seismic reinforcement for equipment classified as importance level 1.1a. At Idemitsu Engineering, we can provide optimal proposals based on case studies from Idemitsu Kosan's refineries and factories. [Features] ◆ With a highly accurate evaluation method, reinforcement costs can be minimized. 　⇒ By using "earthquake motions based on the latest knowledge" and "structural simulations," we can achieve highly accurate seismic evaluations. Consequently, it is possible to reduce reinforcement costs to the limit. (There are also cases where reinforcement was deemed unnecessary.) ◆ We have a track record of reinforcement work even in difficult and narrow locations. 　⇒ We have experience enabling construction in narrow spaces surrounded by existing facilities by adopting small pile driving machines. For more details, please contact us or download the catalog.

• Mechanical Design

The paper featuring the case study can be downloaded. Quick response and low cost! We will solve your equipment issues with Idemitsu's simulation technology.

[Free distribution of literature on simulation case studies] Quick response and low cost! We will solve your equipment issues with Idemitsu's simulation technology. At Idemitsu, we have focused on the potential of computer simulation for plant safety and efficiency from an early stage, and have been utilizing it for over 30 years. During this time, we have independently developed simulation technology that can accurately reproduce plant behavior by comparing operational data and various conditions with calculated values. Are you facing any of the following issues? - Not knowing what is happening in the plant and having no way to take countermeasures. - Having a sense of the cause but wanting to understand it quantitatively. - Wanting a decisive factor to determine which of several solutions is the best method. - Unable to validate in the actual plant, and confirmation takes time and costs, so wanting to quickly and easily verify improvement effects. Idemitsu has experience with hundreds of fluid and structural simulations. We will assist you in clearly identifying fundamental issues and linking them to essential problem-solving. Please feel free to consult with us.

• Mechanical Design

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

Tokyo, August 7, 2025 - (JCN Newswire) - Anthropic, an AI research and development company that develops the cutting-edge AI model Claude, announced today the appointment of Hidetoshi Tojo as the Representative Executive Officer and President of its Japanese subsidiary. Tojo has extensive experience driving growth for technology companies in Japan, most recently serving as the President and Executive Officer of Snowflake's Japanese subsidiary, where he was involved from the launch of the business and achieved significant growth. He has also contributed to the advancement of data utilization in major Japanese companies by closely collaborating with various system integrators. Additionally, he has experience leading teams at Google Cloud Japan and Microsoft, both at their U.S. headquarters and Japanese subsidiaries. For more details, please refer to: https://acnnewswire.com/press-release/japanese/101731/

We sincerely apologize for the inconvenience, but Asano Co., Ltd. will be closed for summer vacation during the following period. We appreciate your understanding. Closure Period: August 13, 2025 (Wednesday) to August 17, 2025 (Sunday) Reopening: August 18, 2025 (Monday) <Inquiries> We will respond sequentially starting from August 18, 2025 (Monday). Asano Co., Ltd. is a manufacturer that supports the development of mobility parts, including automobiles, motorcycles, bicycles, aircraft, and space rockets. We conduct in-house integrated production of sheet metal, plastic, and composite products. We offer proposals for hybrid molding and multi-material bonding, among others. ■ Inquiries ■ Asano Co., Ltd. Headquarters and Gunma Factory 2718-1 Sanwa-cho, Isesaki City, Gunma Prefecture, 372-0011 TEL: 0270-75-1700 FAX: 0270-75-1600 MAIL: salesg@asano-japan.com Official YouTube Channel: https://www.youtube.com/@asano-japan

Newly released: Contact Angle Meter Entry Mini Kit Model, Amazon Exclusive Model JISR3257 compliant, includes θ/2 method and contact angle analysis software. Windows PC sold separately. Complete product priced at ¥399,300 (tax included). At the same time, we have started selling individual components for the contact angle meter kit as an Amazon exclusive model: "θ/2 Method Contact Angle Analysis Software" Kit 1, "Stage + Backlight + Housing" Kit 2, and "Dedicated USB Camera" Kit 3. The contact angle meter can be integrated into the device, allowing for the combination of "θ/2 Method Contact Angle Analysis Software" Kit 1 and "Dedicated USB Camera" Kit 3 for applications. Only the necessary elements such as software and camera can be combined. These models are exclusive to Amazon and will be sold and shipped by Amazon.co.jp.

Our company, NICS Corporation (Headquarters: 1-11-1 Uno, Tamano City, Okayama Prefecture, President: Shinichiro Yamane), had an employee featured in the special article "New Star ★ Running" in the local economy section of the Sanyo Shimbun dated August 7.