We will be exhibiting at "INTERMEASURE 2016"!

It is possible to achieve low-cost control of peripheral devices and data collection in hazardous locations (explosion-proof areas)! This contributes to the explosion-proofing of control panels!

We have housed the MELSEC Q series sequencer in a pressure-resistant explosion-proof box and obtained domestic explosion-proof certification. Electrical equipment used in hazardous locations, even if certified for explosion-proof use overseas such as IECEx or ATEX, cannot be used in Japan without undergoing domestic explosion-proof testing. This product has obtained domestic explosion-proof certification (TIIS certification) and can be safely used in explosion-proof areas. If the power supply ratings and other standards are met, it is possible to replace units from the Q series that are not standard. It is ideal for replacing conventional air purge panels and similar equipment. Since it can control external devices such as solenoid valves in hazardous locations, replacing the control unit of existing equipment with this product makes it easier to achieve explosion-proof compliance. Additionally, it can accept inputs from sensors and measuring instruments, allowing for easy construction of data collection systems in hazardous locations. When combined with our product, the "Pressure-Resistant Explosion-Proof CC-Link Remote I/O Expansion Unit," it is also possible to expand the number of signal I/O and analog I/O points, enabling the construction of data collection and signal monitoring systems in hazardous locations. [Related Products] Pressure-Resistant Explosion-Proof CC-Link Remote I/O Unit Pressure-Resistant Explosion-Proof Fiber Optic Photoelectric Sensor

• PLC
• controller
• Display

Ideal for expanding PLC I/O (input/output) in hazardous locations (explosion-proof areas)!

By housing the CC-Link remote I/O unit in a pressure-resistant explosion-proof box, it is possible to accommodate not only signal input/output expansion units but also analog input/output expansion units. Therefore, when combined with our pressure-resistant explosion-proof PLCs and pressure-resistant explosion-proof fiber optic sensors, it becomes easy to build monitoring and management systems for various measuring devices that can be completed solely within explosion-proof areas. ■ CC-Link I/O (input/output) expansion units with domestic explosion-proof certification that are not available from other companies ■ Changeable input/output point counts by swapping units

• Other process controls
• controller
• Other FA equipment

We have housed fiber optic photoelectric sensors released by major companies in a pressure-resistant explosion-proof box and obtained labor inspection certification! Accurate detection in hazardous locations is possible!

If the detection location is in an explosion-proof area and the amplifier cannot be placed nearby, there is a method to extend it by ordering a fiber unit, but there are the following disadvantages: 1. If the distance between the detection location and the amplifier is long, the light may attenuate, making accurate detection impossible. 2. There are labor and costs associated with wiring fragile photoelectric tubes over long distances. In such cases, please consider this product. This product houses the power supply and amplifier in a pressure-resistant explosion-proof box and has obtained domestic explosion-proof certification (TIIS), allowing for detection at close range without light attenuation. ■ This is a pressure-resistant explosion-proof type of fiber optic photoelectric sensor that could not be used in hazardous locations before. ■ It can be used for accurate presence detection and for detecting the rotation speed of rotating bodies in explosion-proof areas. ■ Up to three sets of amplifiers and fiber units can be housed. Additionally, by using our pressure-resistant explosion-proof PLC and pressure-resistant explosion-proof CC-Link remote expansion unit in conjunction, it is also possible to build a monitoring and management system that can operate entirely within hazardous locations.

• Sensors
• Distance measuring device
• Optical Measuring Instruments

This is an explosion-proof printer that has obtained labor inspection certification, which is not available from other companies!!

Many cases exist where printers are installed in hazardous locations without obtaining explosion-proof certification, using methods such as air purging. However, this product is a pressure-resistant explosion-proof printer certified by domestic explosion-proof standards (TIIS). *Even products that have received explosion-proof certification overseas, such as IECEx or ATEX, cannot be used in Japan unless they have passed domestic explosion-proof testing. This printer is compatible not only with standard thermal roll paper but also with label-type roll paper and dust-free paper (clean paper). It can print weighing and measurement results on-site in explosion-proof areas, allowing for attachment to products or containers, making it ideal for identifying and ensuring traceability of shipped products. It can print not only text but also barcodes.

• Commercial printers
• label
• Other FA equipment

This is a pressure-resistant explosion-proof multiplexer that is not available from other companies! It can also control multiple devices in explosion-proof areas!

Data can be collected from the serial interfaces (I/F) of numerous connected devices and output to higher-level systems in any format (RS232C/RS422/RS485). When performing data input and output to higher-level DCS/PLC or PCs from many devices installed in hazardous locations (explosion-proof areas), using this product allows for the consolidation of wiring, enabling communication with safe areas through a single wire, significantly reducing wiring and piping costs. *Electrical equipment used in hazardous locations must have domestic explosion-proof certification in Japan, even if it has overseas explosion-proof certification such as IECEx or ATEX. This product has obtained domestic explosion-proof certification (TIIS certification) and can be safely used in explosion-proof areas.

• controller
• Other FA equipment
• Other network tools

This is a standard type pressure-resistant explosion-proof indicator (display device).

This is a standard type pressure-resistant explosion-proof indicator (display unit). We develop our own software, allowing for customization according to customer requirements at a low cost. In addition to regular weighing, it also has sequence functions such as input control and output control, and it comes standard with contact output.

• Scale
• Weighing Machine
• controller

High-grade pressure-resistant explosion-proof indicator that supports various controls!!

This is a high-grade pressure-resistant explosion-proof indicator. Since we manufacture it in-house, it can be flexibly customized according to customer requirements, allowing for various controls. A communication system with upper devices such as PCs and DCS can be easily established for weighing data transmission and input of weighing indications via serial communication.

• Scale
• Weighing Machine
• controller

https://youtu.be/md3oISRYXLI?si=Plg35_A18l1Oemh_

In this webinar, experts in immuno-oncology, digital pathology, and clinical oncology will gather to discuss how spatial biology and advanced image analysis are transforming cancer research and healthcare. The speakers will present how multiplex immunofluorescence workflows and deep learning analysis have enabled the identification of immune niches related to treatment response, and how this approach can be extended to other cancers.

We exhibited our electromagnetic wave shielding "Y-Shield" at the "5th Sustainable Materials (SUSMA)" held at Makuhari Messe from November 12 (Wednesday) to 14 (Friday), 2025. Thanks to everyone, we were able to conclude the exhibition successfully. We acknowledge that there may have been some shortcomings at the venue. If you have any requests that we were unable to address on the day or any questions regarding our information, we would appreciate it if you could contact our representative or reach out through the "Contact Us" form on our website. We will continue to strive to meet your expectations, and we kindly ask for your continued support. [Exhibition Overview] Exhibition Name: 5th Sustainable Materials Exhibition within High-Function Materials Week [Tokyo] Official Website URL: Sustainable Materials Exhibition [Tokyo] | November 14-16, Makuhari Messe Venue: Makuhari Messe (within the booth of Maruzen Pharmaceutical Industry Co., Ltd.) Exhibition Period: November 12 (Wednesday) to 14 (Friday), 2025 Main Exhibit Content: Electromagnetic wave shielding processing utilizing plating technology.

If you are not familiar with the field, understanding the "demands from the field" will remain at the level of "problem incidents," and you will be unable to pursue the "root causes" of these incidents, leading to responses that are specific to each problem incident. If the IT department is responsible for creating systems across the company, it is necessary to acquire both ICT technology and an understanding of "the business content of the field and the ideal state of operations from a company-wide perspective." In other words, it is essential to have business knowledge, management techniques, analysis, design, establishment, and effectiveness measurement techniques, as well as data construction techniques that guide various standards and standardization. The first step is "business knowledge." First, you will acquire business knowledge and learn the ability to "understand" the demands from the field. You will prepare for the next theme, which is "learning management techniques to understand the ideal state of operations from a company-wide perspective." This course serves as a practical introductory course to that entry point.

By taking this course, you will be able to construct a BOM and set reference values. You will acquire the skills to set a BOM that includes process steps and the reference values for achieving DX.