※Finished※【11/17–22】Notice of Participation in JIMTOF2016 (28th Japan International Machine Tool Fair)【West 4: W4058】

Low noise and high heat exchange efficiency. Heat exchange equipment that can be used at high pressure.

This catalog features a wide range of heat exchange equipment, including water-cooled coolers (brazed plate type), air-cooled coolers (driven by AC or DC motors, hydraulic motors), and cooling units! 【Features (excerpt) / Air-cooled type】 Maintains heat balance with excellent performance. When used in hydraulic systems, it offers the following advantages: - The cooling system is independent of the water supply line (no water required) - Higher initial investment compared to water-cooled types, but lower running costs - Warm air can be used for heating in winter, among others If you would like the catalog now, please click "Download Catalog"! For a printed version, please contact us. ――――――――――――――――――――――――― ■□ We will be exhibiting at the '2018 New Environmental Exhibition' □■ Exhibition content: ◎ "Fan Plate Oil Cooler" (by Sesino) ◎ "High-Pressure Hydraulic Valve" (by Tognella) We will showcase various hydraulic equipment from different manufacturers, focusing on the above items. We will also distribute various catalogs. Period: May 22 - May 25, 10:00 AM - 5:00 PM Location: Tokyo Big Sight (East Hall 4: U511)

• Other machine elements
• Hydraulic Equipment
• others

Available in "General Steel," "SUS 316," and "Copper Alloy (Medium Pressure)." Widely used in Europe and America.

In addition to standard throttle valves, there are various high-pressure products such as pressure-regulating valves and angle valves, which can be selected according to specifications. The materials include general steel and "high corrosion-resistant" stainless steel "SUS 316," as well as copper alloys suitable for use with hydraulic, water, and air pressure (*medium pressure). You can view a product overview catalog that summarizes the products handled by TOGNELLA and a catalog detailing the SUS 316 products. ● If you would like the catalog immediately, please click "Download Catalog"! ◎ If you prefer a printed version, please contact us.

• valve
• Water Hydraulic Equipment
• Hydraulic Equipment

Ultra-low noise with a typical operating sound of just 52dB! This pump minimizes noise and vibration generated as the pressure increases to the extreme.

The SETTIMMA company's "CONTINUUM(R)" is a high-pressure, low-noise pump with a maximum pressure of 300 bar and a noise level of 52 dB. It achieves a noise reduction of over 15 dB compared to conventional external gear pumps. It maintains high volumetric efficiency even at ultra-low speeds, leading to energy savings and cost reductions. 【Features】 ● Average noise reduction of 15 dB(A) compared to other pumps ● Easy replacement with existing gear pumps as the external dimensions are almost unchanged ● Special design that eliminates oil sticking phenomena ● Application examples: garbage collection trucks, forklifts, power plants, automobiles, machine tools, injection molding machines, logistics loading, marine industry, etc.

• Other pumps
• Hydraulic Equipment

The size is interchangeable due to compliance with ISO standards. The type that sets parameters via the fieldbus interface has real-time diagnostic capabilities.

The mounted digital driver controls the hydraulic pressure of the valve according to the command signal. The digital hydraulic equipment features high performance with over 20 types of alarms compared to the analog diagnostic function that only provides fault signals. Additionally, due to the use of digital information, it has high resistance to electromagnetic noise and explosion-proof specifications are also available. 【Features of Digital Hydraulic Equipment】 ■ More functions and parameters (e.g., linearization, PID) ■ High reproducibility and numerical soft setting ■ Enhanced diagnostic functions… open circuit detection, control monitoring, temperature range, etc. ■ Direct fieldbus interface 　… improved accuracy and durability, more information available 　… direct connection to the machine's communication network 　… CANopen / PROFIBUS DP / EtherCAT 【Specifications】 ■ Types: Directional control valve, pressure control valve, flow control valve ■ Sizes: 06, 10 (2-stage), 10 - 32 ■ Flow: Maximum 70–3500 L/min ■ Pressure: Maximum 350 bar

• Hydraulic Equipment
• Servo
• Other network tools

This is the comprehensive catalog of Atos products, which handle advanced digital control hydraulic equipment.

We manufacture advanced hydraulic equipment such as digital control hydraulic devices and digital control cylinders that support fieldbus.

• Hydraulic Equipment

Environmentally friendly

These series are non-spill types that comply with ISO16028 or are ISO16028 compliant, designed to prevent oil leakage during attachment and detachment, and are environmentally friendly. They adhere to a globally recognized ISO standard, making them usable overseas. In particular, the APM(M) series can be detached at residual pressures of up to 300 bar, with sizes ranging from 3/8 (APM9) to 1-1/2 (APM30), featuring thread shapes of BSP and NPT, and flow rates of approximately 60 to 600 L/min (at a pressure drop of 4 bar), with a maximum pressure of 270 to 350 bar. The A series includes eight types ranging from 1/8 (A4) to 1-1/2 (A30), also with BSP and NPT thread shapes, flow rates of approximately 9 to 900 L/min (at a pressure drop of 4 bar), and a maximum pressure of 270 to 420 bar. Additionally, the FIRG series ranges in size from 1/4 (FIRG14) to 2 (FIRG200), with BSPT, BSP, and NPT thread shapes, flow rates of approximately 30 to 1500 L/min (at a pressure drop of 4 bar), and a maximum pressure of 200 to 330 bar. We have BSPT connection thread shapes in stock. These products are used in various machines, including construction, civil engineering, agriculture, and industrial machinery.

• valve
• Piping Materials
• Hydraulic Equipment

[Lecture Topics] 1. Trends in Policies for Decarbonization of Housing and Buildings Tetsuya Hirayama, Deputy Director, Housing Bureau, Ministry of Land, Infrastructure, Transport and Tourism (in charge of architectural planning) 2. Construction Circular Economy - Expanding Horizontal Recycling for Achieving Sustainable Construction Takahiro Moritomi, Analyst, Social Infrastructure Team, Next Generation Infrastructure and Services Office, Industry Research Department, Mizuho Bank, Ltd. 3. Beyond "Scrap and Build" Aiming for the Realization of "Circular Design Build®" Shoichi Fukui, Senior Chief Expert, Sustainability Promotion Department, Management Planning Office, Takenaka Corporation

[Instructor] Attorney Kurato Suzuki, Irokawa Law Office [Key Lecture Content] Due to the amendments to the Comprehensive Promotion Law for Labor Policies, starting from October 1, 2026, employers will be required to take necessary measures in employment management regarding customer harassment (Kasu Hara) and sexual harassment against job seekers (Job Hunting Sexual Harassment). In line with this, companies will need to prepare for practical implementation before the enforcement date, based on the guidelines published by the Ministry of Health, Labour and Welfare. This includes developing internal regulations, establishing consultation and response systems, raising awareness within the company, and determining judgment and response methods on-site. This seminar will organize the setting of job hunting rules related to job hunting sexual harassment, internal awareness, and key points for regulatory development. It will also explain the distinction between legitimate complaints and customer harassment, judgment, documentation, and response on-site, the establishment of a company-wide system, regulatory development considering dispute risks, and points that are easily overlooked. The Human Resources, Labor, Legal, and Compliance departments will systematically organize the response matters that need to be confirmed in preparation for the enforcement on October 1, 2026, from the perspectives of guideline compliance and on-site operations. [Lecture Items] 1. Job Hunting Sexual Harassment 2. Customer Harassment 3. Q&A

[Speaker] Mr. Itsuki Wakayama, Project General Manager, Technology Promotion Unit, Low Carbon Solutions Division, INPEX Corporation [Key Lecture Content] The greatest advantage of synthetic methane production through CO2 methanation technology is that it enables decarbonization without significant additions or modifications to all existing natural gas and city gas infrastructure. At INPEX, after two NEDO commissioned projects, we have been conducting the development of practical application technology with a capacity of 400 Nm3-CO2/h, one of the largest in the world, as a subsidized project by NEDO since the fiscal year 2021. By the fiscal year 2025, we aim to achieve the injection of synthetic methane produced during the demonstration operation of the test facility. This presentation will provide detailed information on the results of the NEDO project for the fiscal year 2025, including the current status of the latest test facilities. [Presentation Items] 1. INPEX's efforts towards net zero by 2050 2. Policy trends related to CO2 methanation 3. Challenges of CO2 methanation 4. Results of the NEDO practical application technology development project with a capacity of 400 Nm3-CO2/h for the fiscal year 2025 5. Future commercialization prospects and challenges 6. Q&A / Business card exchange

[Speaker] Mr. Satoru Shimizu, President and CEO of Okunote Inc. [Key Lecture Content] Generative AI is not a "magic wand," but a "mirror" that reflects the questions of the user. In this lecture, based on my book "The 'Super' Planning Techniques Practiced by Competition Disruptors: Seven Creative Steps to Lead Winning Strategies with the 'Art of Questioning'," I will explain how to overcome the challenges of proposals being rejected, not moving forward within the company, and not being executed on-site through interactions with AI. I will introduce the entire process of planning, linking it with AI utilization, from question design to hypothesis destruction, structuring materials from the decision-maker's perspective, forming internal consensus, managing execution, and turning reflections into assets. In the latter part of the workshop (exclusive to on-site participants), you will actually formulate questions and refine your dialogue with AI, taking home usable "art of questioning" techniques for tomorrow. [Lecture Items] 1. Orientation: AI is a "mirror," not a "magic wand." 2. Enhancing the precision of planning through "question design" and "hypothesis destruction." 3. Structuring materials from the decision-maker's perspective to create "acceptable" proposals. 4. Forming consensus that transcends internal barriers. 5. Mechanisms that prevent execution from stopping and turning experiences into assets through reflection. 6. Habitualizing AI as a "partner" and the roles humans will take on in the AI era.

【Exhibition Overview】 A collection of products related to data centers, which are at the core of AI infrastructure, gathered in one place.