DKSH Japan Co., Ltd. will be exhibiting at BioPharma 2017.

High-sensitivity biosensor based on the SwichSENSE principle using DNA as a fixation tool.

heliX/heliX+ is a high-sensitivity device for analyzing molecular interactions and protein properties that adopts a new principle called "SwitchSENSE," which uses DNA nanolevers as a immobilization tool. It has approximately 100 times the sensitivity of existing biosensors and possesses a wide range of applications and analytical capabilities, including the analysis of high-affinity interactions that are difficult to measure with conventional devices, dual specificity interaction analysis, and enzyme kinetics analysis of nucleic acid-related enzymes. Additionally, the chip can be reused multiple times. Since DNA is used for immobilization, it allows for a high degree of freedom in presenting molecules on the chip, such as immobilizing two types of molecules. There are also no effects from the immobilization matrix. Furthermore, being a sensor that uses nucleic acids allows for easy implementation of enzyme kinetics analysis for nucleic acid-related enzymes such as polymerases and endonucleases, and it demonstrates significant power in evaluating inhibitors of viral proliferation. The modular design of the device also enables easy high-throughput capabilities. It can be utilized in a wide range of research, from drug discovery to biophysical fundamental research on biomolecules.

• Analytical Equipment and Devices

A flow imaging microscope capable of particle size distribution and particle image analysis in solution. It is used for detecting impurities in biopharmaceuticals.

Features - Measurement possible with a small sample volume (100 μL and above) - Measurable particle size: 0.3 μm to 600 μm - High-resolution image analysis through threshold optimization - Equipped with autofocus function - Capable of saving raw image (video) files - No sheath fluid required - Easy replacement of flow cell and simple cleaning - Lens interchangeable (2X, 4X, 10X, 20X) - Compatible with dedicated auto-sampler - Compliant with 21 CFR Part 11

• Other physicochemical equipment

High-precision viscosity measurement with a minimum of 10μL of micro-sample, up to 100,000 cp. Fully automated system compatible with 96-well plates. Also supports shear rate scanning.

A new ultra-micro viscometer utilizing microfluidic control and microelectromechanical systems technology. The VROC Initium is a fully automated model that handles everything from sample introduction to channel cleaning, solving the issues of traditional viscosity measurement that required cumbersome procedures and large sample volumes. It contributes to research and development and quality control across a wide range of fields, including biopharmaceuticals, biological samples, inkjet inks, various petrochemical products, and battery materials. [Features] - Fully automated system compatible with 96 wells - High precision and high reproducibility - Supports temperature and shear rate scanning - Small sample volume (10 μL and up) - Wide measurement range (0.2 to 100,000 cp) - High shear rate capability (up to 1.6 million /sec) - Accurate temperature control (4 to 70 °C) - Closed system measurement - Compatible with non-Newtonian fluids

• Composite Materials
• Viscometer
• Testing Equipment and Devices

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

This is the announcement for the second part of the Op-Amp Classroom Series, "Op-Amp Classroom - DC Characteristics and AC Characteristics." We will explain the DC and AC electrical characteristics as the basics of op-amps. Since we will start with an introduction to fundamental functions, those who have not participated in Op-Amp Classroom 1 are also welcome to join. The difficulty level is beginner to intermediate, so whether you are new to analog ICs or have specific issues, we encourage you to participate! ● Target Audience - Engineers who are new to analog circuit design - Board evaluators and test engineers - Those who are newly responsible for component purchasing ● Agenda 1. Electrical Characteristics of Op-Amps (DC Characteristics) - Input offset voltage / Input bias current - Common-mode input voltage range and input stage configuration - Output inversion of dual-supply op-amps - What are sink/source currents? - Crossover distortion 2. Electrical Characteristics of Op-Amps (AC Characteristics) - What is slew rate? - What is gain-bandwidth product (GBW)? 3. Oscillation of Op-Amps We look forward to your participation!

Nitto Kohki will be exhibiting at the "Data Center EXPO" held at Makuhari Messe Hall 1 from Wednesday, October 23 to Friday, October 25. [Booth Number: A6-23] At this exhibition, we will showcase the "Compact Zero Spill Coupler," which is specifically designed for data centers, including supercomputers. We will also present the "Blind Mate Type," a fitting exclusively for server cooling piping, as a reference exhibit.

On this occasion, we have opened a showroom for Tajima embroidery machines in conjunction with the renovation of the Chūnichi Jūki headquarters building. To commemorate the opening of the showroom, we will hold an exhibition of Tajima embroidery machines.

Next-generation large resin and metal 3D printers that achieve astonishing high-speed molding, low-cost, and high-precision molding are being rapidly introduced to the market. These printers are being utilized in the manufacturing of large parts and products in the aerospace, automotive, industrial machinery, plant, defense, and social infrastructure sectors, as well as in parts and mold repairs and reverse engineering. In this seminar, we will discuss the latest developments and features of cutting-edge machines from Stratasys, the largest manufacturer of large resin 3D printers, and Lobotics, along with domestic and international case studies. We will also explore innovative molding technologies from leading users such as Fujikohsai Industries and Sanko Gosei, who utilize large metal 3D printers from Meltio and Matsuura Machinery to create large metal parts, large metal products, and large mold components. The seminar will provide concrete and easy-to-understand explanations of key points and considerations for implementation and utilization, various manufacturing examples, and discussions on molding size, quality, cost, lead time, and success and failure stories. 3D printers enable the complex integrated molding of multiple parts into a single large shape, which was impossible with previous processing methods and technologies. This capability allows for a significant reduction in the number of parts, achieving short lead times, low costs, high-quality manufacturing, and a reduction in the number of processes and personnel involved.