MF-Tokyo 2017 5th Press, Sheet Metal, and Forming Exhibition

A valve that allows for the selection of a method that meets your requirements! It is also possible to add additional monitors.

The "Cross Flow Series Double Valve Double" is a current model from ROSS that exhibits minimal decrease in exhaust response time not only during normal operation but also in the event of a failure in one side of the valve body. ROSS's double valve is a normally closed double-acting three-way solenoid valve that incorporates two valve bodies that operate in synchronization. It offers a variety of monitoring/sensor methods, allowing users to select the appropriate method based on their country, region, or specific requirements. It is also possible to add monitoring to existing valves. 【Features】 ○ Excellent responsiveness ○ Wide range of monitoring/sensor methods ○ Series configuration and piping methods ○ Repairable ○ Monitoring function For more details, please contact us or download the catalog.

• valve

Contributing to malfunction! A valve with a significantly lower likelihood of malfunction compared to a single valve, ensuring high safety.

One of the important features of the "double valve" is that the valve has a duplex (dual mechanism). This valve incorporates two independent 3/2 normally closed three-way valves into a single common body. Each of these two main valve bodies is operated by a dedicated 3/2 normally closed pilot valve. When both pilot valves are energized simultaneously, both main valve bodies operate at the same time. The "double valve" is much safer than a single valve because the likelihood of both valve bodies malfunctioning simultaneously during the same cycle is extremely low. 【Lineup】 ○ With EP sensor ○ Without EP sensor ○ With pressure switch (PS) sensor For more details, please contact us or download the catalog.

• valve

Helps maintain performance and improve durability! Air pressure control equipment that prevents machine damage.

ROSS manufactures and sells a variety of pneumatic control devices with connection diameters ranging from 1/8 to 2-1/2 inches, totaling approximately 5,000 types. Since its founding in 1920, the company has leveraged its extensive experience to continuously develop new products, demonstrating its leadership as a global manufacturer of pneumatic equipment. ROSS valves are used in various industries around the world, including steel, machine casting, aluminum, and glass. 【Flow Rate】 ○ Inlet Pressure = 6.7 bar (100 psig) ○ Pressure Drop = 0.69 bar (10 psig) ○ Air Temperature = 20℃ ○ Relative Humidity = 36% For more details, please contact us or download the catalog.

• valve

Accident prevention due to residual pressure! Safety-related equipment against misoperation and unintended activation.

ROSS provides a range of products specialized in safety, such as "L-O-X," "EEZ-ON," "P.O. Check," and "Double Valve," as well as application circuit technology for constructing pneumatic systems using these devices. When designing machinery, it is essential to implement inherently safe design measures that anticipate mistakes and failures. A useful tool in this process is risk assessment. At Ross, we identify hazards through risk assessment and determine the control categories for safety measures. We then configure the control system with corresponding devices. 【Features】 [DM2 C/E Series Double Valve] ○ Self-contained dynamic monitoring system ○ Equipped with status indicators ○ Compliance with standards ○ High-speed response and large exhaust capacity ○ Reliable poppet structure resistant to contamination For more details, please contact us or download the catalog.

• valve

Stable operation in harsh environments! High durability and high flow rate valves.

The "27/21 Series" is a line-mounted poppet valve designed for stable operation in harsh environments, high durability, and large flow rates. It not only responds quickly but also maintains a stable response time over extended periods. Additionally, ROSS poppet valves open and close rapidly. This is the result of a valve body design where the areas of the intake poppet, exhaust poppet, and piston poppet are carefully balanced to achieve good sealing and strong switching power. 【Features】 ○ Wide operating temperature range ○ Fast response and stable switching operation ○ Abundant options ○ Maintenance and repair possible For more details, please contact us or download the catalog.

• valve

The goal is not to introduce AI. We will explain "standardization of manufacturing processes" to eliminate dependency and maximize the effectiveness of AI! While the spread of generative AI is progressing, there is an increasing number of manufacturing companies that say, "We don't know where to apply AI due to the black box nature of the site," and "Despite implementation, productivity hasn't increased." The cause lies not in the performance of AI, but in the "lack of business organization and standardization before implementation." In this webinar, we will clearly explain business improvement methods (BPMS) and how to properly organize business processes to avoid wasting AI investments, using case studies. [Recommended for those who:] - Are struggling to engage the field due to resistance like "busy" or "it's fine as it is." - Want to eliminate differences in rules between factories and locations, as well as dependency and black box issues with veteran employees. - Are being asked to "utilize AI" but don't know where to start due to disorganized business processes. [Here is the application form] https://www.earthlink.co.jp/seminar/10840/ *Pre-registration required (free) *We will give a "partial excerpt of the presentation materials" to those who respond to the survey after viewing.

[Speaker] Ms. Sayako Sumomo, Director, International Equipment Division, Equipment Policy Department, Acquisition, Technology & Logistics Agency [Key Lecture Content] As the security environment surrounding our country changes at an accelerating pace, the government is promoting defense equipment transfers as an important policy measure to create a desirable security environment for our nation. Promoting defense equipment transfers not only enhances regional deterrence and response capabilities for peace and stability in the Indo-Pacific region but also contributes to strengthening our country's defense production and technological base through market expansion and supply chain cooperation. Furthermore, the development of the defense industry and other industries with dual-use technologies can lead to growth in the Japanese economy. In this lecture, I will explain recent trends in defense equipment transfers, taking into account the recent revisions to the equipment transfer system. [Lecture Topics] 1. Japan's Defense Policy 2. Significance and System of Equipment Transfers 3. Recent Trends in Equipment Transfers 4. Government Initiatives 5. Q&A / Business Card Exchange

[Speaker] Hiroki Hara, Country Lead, Cloud & Service Provider Segment, Schneider Electric Holdings Co., Ltd. [Key Lecture Content] In the era of AI, it is essential to redesign not just the equipment but the very way energy is utilized in data centers. This presentation will organize the approach to power architecture aimed at enhancing competitiveness, taking into account global trends and the constraints of the Japanese market. Additionally, through Schneider Electric's comprehensive portfolio, which includes cooling and operations, we will provide perspectives for selecting optimal options in Japan's increasingly complex power environment, as well as hints for future implementations. [Lecture Items] 1. Introduction to Schneider Electric 2. Global megatrends and the external environment surrounding the data center industry 3. Architecture of data center power infrastructure - Design philosophy necessary for safely delivering electricity 4. Schneider's portfolio connecting power and cooling, design, construction, and operation 5. Unique challenges of the Japanese market and options for optimal solutions 6. Q&A / Business card exchange

[Speaker] Yuya Sato, Director, Innovation Management Co., Ltd. [Lecture Topics] 1. Main challenges in the field of research and development 2. Overview of research and development management 3. How to utilize "roadmaps" for formulating persuasive mid- to long-term strategies 4. How to utilize "technology portfolios" to achieve convincing resource allocation 5. "Gate management" to improve the success rate of highly innovative research and development themes 6. Integrated research and development management process 7. Q&A

Our TL Division will be exhibiting at the "Surface Treatment Processing Technology Exhibition 2026" to be held on June 26 (Friday) at the Osaka Industry Creation Center. We invite you to visit our booth to see our products and technologies. We sincerely look forward to your attendance. ■ Exhibition Name Surface Treatment Processing Technology Exhibition 2026 ■ Date June 26, 2026 (Friday) ■ Venue Osaka Industry Creation Center, 3F Market Plaza / 4F Event Hall ■ Exhibited Technology We will introduce optimal solutions for surface modification composites and ultra-hard coating removal by adding a new coating to Y-Coat, which leads the mold market. New Coating: Y-Coat Type UL Product Introduction Page