※Finished※【5/23～26】Notice of participation in the 2017 New Environment Exhibition (N-EXPO 2017 TOKYO)【East 2: A221】

The size is interchangeable due to compliance with ISO standards. The type that sets parameters via the fieldbus interface has real-time diagnostic capabilities.

The mounted digital driver controls the hydraulic pressure of the valve according to the command signal. The digital hydraulic equipment features high performance with over 20 types of alarms compared to the analog diagnostic function that only provides fault signals. Additionally, due to the use of digital information, it has high resistance to electromagnetic noise and explosion-proof specifications are also available. 【Features of Digital Hydraulic Equipment】 ■ More functions and parameters (e.g., linearization, PID) ■ High reproducibility and numerical soft setting ■ Enhanced diagnostic functions… open circuit detection, control monitoring, temperature range, etc. ■ Direct fieldbus interface 　… improved accuracy and durability, more information available 　… direct connection to the machine's communication network 　… CANopen / PROFIBUS DP / EtherCAT 【Specifications】 ■ Types: Directional control valve, pressure control valve, flow control valve ■ Sizes: 06, 10 (2-stage), 10 - 32 ■ Flow: Maximum 70–3500 L/min ■ Pressure: Maximum 350 bar

• Hydraulic Equipment
• Servo
• Other network tools

Available in "General Steel," "SUS 316," and "Copper Alloy (Medium Pressure)." Widely used in Europe and America.

In addition to standard throttle valves, there are various high-pressure products such as pressure-regulating valves and angle valves, which can be selected according to specifications. The materials include general steel and "high corrosion-resistant" stainless steel "SUS 316," as well as copper alloys suitable for use with hydraulic, water, and air pressure (*medium pressure). You can view a product overview catalog that summarizes the products handled by TOGNELLA and a catalog detailing the SUS 316 products. ● If you would like the catalog immediately, please click "Download Catalog"! ◎ If you prefer a printed version, please contact us.

• valve
• Water Hydraulic Equipment
• Hydraulic Equipment

Low noise and high heat exchange efficiency. Heat exchange equipment that can be used at high pressure.

This catalog features a wide range of heat exchange equipment, including water-cooled coolers (brazed plate type), air-cooled coolers (driven by AC or DC motors, hydraulic motors), and cooling units! 【Features (excerpt) / Air-cooled type】 Maintains heat balance with excellent performance. When used in hydraulic systems, it offers the following advantages: - The cooling system is independent of the water supply line (no water required) - Higher initial investment compared to water-cooled types, but lower running costs - Warm air can be used for heating in winter, among others If you would like the catalog now, please click "Download Catalog"! For a printed version, please contact us. ――――――――――――――――――――――――― ■□ We will be exhibiting at the '2018 New Environmental Exhibition' □■ Exhibition content: ◎ "Fan Plate Oil Cooler" (by Sesino) ◎ "High-Pressure Hydraulic Valve" (by Tognella) We will showcase various hydraulic equipment from different manufacturers, focusing on the above items. We will also distribute various catalogs. Period: May 22 - May 25, 10:00 AM - 5:00 PM Location: Tokyo Big Sight (East Hall 4: U511)

• Other machine elements
• Hydraulic Equipment
• others

Non-spill type that contributes to the prevention of water quality pollution and soil contamination! It prevents oil from leaking externally during attachment and detachment, and allows for attachment and detachment even when there is residual pressure.

The "VEP-HD" allows for safe coupling and uncoupling even with high residual pressure due to its triple valve system. At the same time, it prevents external oil leakage during coupling and uncoupling. It is designed with heavy-duty, high-pressure hydraulic applications in mind, considering high repetitive peak pressures and significant mechanical stress. The "VEP-HD" is made from high-tensile carbon steel and features a nitrided surface treatment that reduces wear on the coupling. This series underwent one million impulse tests during its development. 【Features】 ○ The flat face is easy to clean and effectively reduces contamination intrusion into the system. ○ There is no external leakage of operating oil during coupling and uncoupling, reducing environmental impact. ○ It minimizes air entrapment during coupling and uncoupling, aiding in optimal system operation.

• Coupling

For crushers, augers, drills, and more! The heavy-duty design "S" is the most powerful in the series with 500kW of durability!

The "S" is designed for heavy-duty use to continuously deliver high output, with a maximum output of 500kW. Recommended applications include crushers, augers, drills, and winches, with options for two-stage shifting and freewheeling based on usage. 【Features】 ○ Easy to use as an industrial "shaft rotation type" ○ Tapered roller bearings capable of withstanding high radial/axial loads ○ Automatic switching multi-speed function suitable for many applications

• Other motors
• Hydraulic Equipment

Compact and lightweight hydraulic manifold block. An excellent product that can handle high pressure and environmental conditions.

TSB (TOHTO System Block) is TOHTO's original hydraulic valve control block. The concept is "compact and lightweight" for hydraulic systems. We provide a one-stop solution from design, processing, assembly, to operational testing. Custom manufacturing is available for each specification and circuit diagram. The following are the main manufacturers we handle: *Note that we also handle many other manufacturers beyond those listed below.* - Delta Power - Danfoss - Sun - Bosch Rexroth Oil Control - Tecnord - Atos - Bieri - Brevini - Deltrol - Wandfluh - Walvoil

• valve
• Hydraulic Equipment

Compact size that can be installed in narrow spaces. It supports rotation in both directions, making installation and startup easy! (DIN mount version)

The compact "XPi" pump can be installed in tight spaces and used at high rotational speeds. It is compatible with either direction of rotation depending on the installation position of the suction pipe. Additionally, it features easier installation and startup. It is the DIN version of the "XAi-SAE" series. 【Features】 ○ 7 piston design ○ Automatic adjustment function for valve plate and barrel ○ Use of high-strength materials ○ Reinforced shaft seal ● For more details, please contact us or download the catalog.

• Other pumps
• Hydraulic Equipment

With the current processing methods and technologies, it is difficult to create complex shapes, integrated structures, lattice/honeycomb structures, porous structures, hollow structures, hybrid structures, and direct manufacturing from 3D data. Furthermore, through topology optimization and collaboration with generative design, we can achieve the creation of innovative aluminum parts that are not available from conventional or other companies, rapid development and prototyping of parts, dramatic reduction in the number of parts, ultra-lightweight and compact designs, cost reduction, and significant decreases in the number of processes and personnel involved. In this seminar, leading users such as J·3D, ODEC, and pioneers in white copper, who have achieved remarkable results in aluminum part manufacturing using metal 3D printers, will discuss key points and precautions for implementation and utilization, various manufacturing methods and technologies, rapid, low-cost, high-quality manufacturing techniques, uniquely developed next-generation AM technologies, groundbreaking case studies that significantly differentiate from other companies' parts, as well as factors for failure and secrets to success. Based on numerous research results and rich manufacturing achievements, we will provide a clear and concrete explanation for those considering implementation, beginners with interest, and those who have just started in the field. [Currently, half-price tuition] When applying, please write "Other [8,500 yen]" in the "Other" section above the application form on our website.

Connectors exist in very large numbers in the world. It is very difficult for customers to find connectors that match their specific applications from among them. The "Product Finder" on the ODU website serves as a tool to help find the right connector products. You can search for the optimal connector from various approaches, such as matching it to your cable, electrical specifications, waterproofing, etc. The connectors you search for will provide information on electrical specifications, durability, and also CAD data. In the online seminar, we will introduce how easy and quick it is to search for connectors using the "Product Finder" in a live format. ------------ Date and Time: November 19, 2026 (Thursday) 14:00 - 14:35 Venue: Online (A URL for the venue will be sent via email after you register) Speakers: Miho Kato, Sales Department, Kamex ONE Co., Ltd. Masaru Kimura, Sales Manager, ODU Japan Co., Ltd. ------------

KAI Group will be exhibiting at the "Advanced Materials Technology Exhibition 2026" held at Tokyo Big Sight. This exhibition widely introduces advanced materials and technologies in the industrial sector, covering everything from materials to their processing. It provides an essential venue for business discussions that are crucial for the development of new technologies and products in advanced fields. We plan to showcase industrial blades, cutters, and scissors with exceptional sharpness, leveraging the technology we have cultivated through our razor products. We sincerely look forward to your visit.

We will be exhibiting products that have undergone surface treatment through thermal spraying. Specifically, we will showcase products that have been ceramic thermally sprayed on metal rolls and aluminum alloy products that have undergone hard surface treatment. We provide a comprehensive service for thermal spraying repairs of parts that have lost thickness due to wear, surface modification of metal components, and other related machining processes. Exhibition Dates: November 11 (Wednesday) to 13 (Friday), 2026 - 3 days Opening Hours: 10:00 AM to 5:00 PM Venue: Tokyo Big Sight, East Hall 2

Kinoshita Corporation will exhibit at "N-Plus 2026," held at Tokyo Big Sight from November 11 (Wednesday) to 13 (Friday), as a member of the Japan Nonwoven Fabric Association's joint pavilion. In this exhibition, we will introduce a wide range of products, including the water-soluble and biodegradable nonwoven fabric "Haibios," themed "Returning to Paper," as well as the pulp nonwoven fabric "Kinari-to," which can be thermoformed. Additionally, we will have a mini sound absorption experience corner where you can actually test the differences in sound using our pulp-based sound-absorbing material "Otocell." We will showcase the various possibilities of our airlaid nonwoven fabrics through actual product displays and demonstrations. Please come and see our products and samples at the venue.