Free CAE software introduction seminar - Ongoing!

Analysis of gas flow under low pressure conditions; analysis software compatible with rarefied gases (rarefied fluids).

**Features** - Adopts unstructured mesh, allowing for calculations that accurately reflect the complex shapes of actual devices. - High parallel efficiency enables quick computation results even for large-scale geometries. - Utilizes a particle method, ensuring convergence solutions even with poor-quality computational grids, unlike fluid models. - Comprehensive technical support ensures that even those new to simulations or busy with experiments can reliably achieve results. **Supports Various Cases** - Simulation of rarefied gas flow within a vacuum chamber. - Simulation of thin film generation in semiconductor manufacturing. - Chemical vapor deposition (CVD), organic light-emitting diode (OLED), molecular beam epitaxy (MBE). - Film deposition simulations involving chemical reactions, such as CVD. **Outputs Various Calculation Results** - Calculations of chemical reactions. - Calculation of chemical reactions from Arrhenius-type reaction data. - Calculations of dissociation, recombination, and molecular (atomic) exchange reactions. - Ability to set multiple reaction equations on the GUI. *For more details, please refer to the catalog or feel free to contact us.*

• Contract Analysis
• Other analyses

"Particle-PLUS" is a plasma analysis software suitable for simulations such as plasma reaction furnaces and chemical vapor deposition (CVD).

Particle-PLUS is a plasma and rarefied fluid analysis software that uses the particle method. It is effective for research, development, and manufacturing of devices and materials using plasma. It is also capable of analyzing advanced physical models such as dual-frequency CCP and external circuit models. With comprehensive support, even those new to simulation or busy with experiments can reliably achieve results. The software employs a particle model to analyze plasma, using the PIC/MC (Particle In Cell / Monte Carlo) method to track the motion of particles representing electrons and ions. Additionally, depending on the target plasma density, it efficiently switches between implicit methods for relatively high densities and explicit methods for low densities, allowing for effective solutions even with complex models. It excels in plasma simulations of low-pressure gases, where fluid modeling is particularly challenging. In addition to standard functions for CCP, ICP, and magnetron sputtering calculations, customization to fit the customer's equipment is also available.

• Other analyses

Material development simulation software compatible with various types of materials, supporting analysis in quantum mechanics, classical mechanics, and mesoscale.

"Materials Studio" A suite of molecular modeling/simulation tools for next-generation materials development equipped with quantum mechanics (density functional theory), classical mechanics (molecular dynamics calculations), mesoscale (dissipative particle dynamics calculations, etc.), statistics, and analysis/crystallization tools. 【Features】 ■ Simulation software that streamlines material development Available for use by those engaged in research, development, design, and manufacturing across various industries and fields. ■ Supports various types of materials Effective in predicting how the structure of atoms and molecules relates to the physical properties and behaviors of materials in the fields of materials science and chemistry, aiding in the understanding of physical phenomena. ■ Examples Research and development of crystal growth, thin film formation, fuel cells, lubricants, catalysts, polymers and mixtures, metals and alloys, batteries and fuel cells, etc. ■ Enhanced visualization with "Materials Studio Visualizer" ■ All tasks, including creating crystal structures, setting calculation conditions, and displaying calculation results, can be performed on a single GUI screen. *For more details, please refer to the catalog or feel free to contact us.

• Image analysis software
• others

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo presentation for actual mesh creation and movement!

• simulator
• Thermo-fluid analysis
• Contract Analysis

This is simulation software that makes it possible to analyze the arc plasma of automotive spark plugs, which was previously difficult.

VizSpark is an arc plasma simulation software developed by Esgee Technologies in the United States, founded by Professor Raja from the University of Texas at Austin, an expert in plasma simulation. It has the most extensive track record in the analysis of spark plugs and circuit breakers, with many case studies presented at academic conferences. In Japan, it has a strong track record primarily among complete vehicle manufacturers and internal combustion engine-related manufacturers, and it supports the analysis of devices such as: - Circuit breakers - Atmospheric pressure discharge - Ignition plugs (spark plugs) - Plasma torches (plasma jets) - Welding - Thermal spraying - High-intensity lamps

• Engine parts
• Other analyses
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the actual mesh creation and movement in a demo presentation!!

• Thermo-fluid analysis

Dilute fluid analysis software 'DSMC-Neutrals' that also supports 'shower head type CVD' analysis.

Simulation Analysis of Gas Flow in Showerhead-Type CVD Equipment Initially compatible with various simulations 【Features】 ■ By adopting a non-structured mesh, it is possible to compute the exact shape of complex actual equipment. ■ High parallel efficiency allows for quick computation results even for large-scale shapes. ■ Since a particle method is used, unlike fluid models, convergence solutions can be obtained even with poor quality computational grids. ■ With comprehensive technical support, even those new to simulations or busy with experiments can reliably achieve results. ◆ Compatible with various cases ◆ - Simulation of rarefied gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as Chemical Vapor Deposition (CVD), Organic Light Emitting Diodes (OLED), and Molecular Beam Epitaxy (MBE) ◆ Outputs various computation results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also offer contract analysis, so please feel free to contact us.

• Other analyses

This is simulation software that makes it possible to analyze arc plasma in automotive spark plugs, which was previously difficult.

VizSpark is an arc plasma simulation software developed by Esgee Technologies in the United States, founded by Professor Raja from the University of Texas at Austin, an expert in plasma simulation. It has the most achievements in the analysis of ignition plugs and circuit breakers, with many cases presented at academic conferences. In Japan, it has a strong track record primarily among complete vehicle manufacturers and internal combustion engine-related manufacturers, and it supports the analysis of devices such as: - Circuit breakers - Atmospheric pressure discharge - Ignition plugs (spark plugs) - Plasma torches (plasma jets) - Welding - Thermal spraying - High-intensity lamps

• simulator
• Contract Analysis
• Analysis Services

This software was developed by Professor Raja, an expert in plasma simulation at the University of Texas at Austin.

VizGlow is a general-purpose plasma simulation software developed by Esgee Technologies, Inc., founded by Professor Raja from the University of Texas at Austin, an expert in plasma simulation.

• simulator
• Contract Analysis
• Analysis Services

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demo presentation!

• simulator
• Thermo-fluid analysis
• Contract Analysis

It is a fully automatic ultra-fast mesh generator that creates Cartesian Hex Dominant meshes (where hexagonal shapes occupy the majority).

Harpoon is a fully automated mesher that creates fluid analysis and structural analysis meshes for CAD models. It rapidly generates volume meshes as hex-dominant meshes (with a majority of hexahedra and the remainder being tetrahedra, pyramids, and wedges) and surface meshes as quad-dominant meshes (with a majority of quadrilaterals and the remainder being triangles).

• Other analyses

"Dust behavior affecting contamination" analysis supported by the rarefied fluid analysis software 'DSMC-Neutrals'

Simulation Analysis of Dust Behavior Affecting Contamination Initially compatible with various simulations 【Features】 ■ By adopting unstructured meshes, it is possible to compute the exact shape of complex actual devices. ■ High parallel efficiency allows for quick computation results even for large-scale shapes. ■ Since a particle method is used, unlike fluid models, convergence solutions can be obtained even with poor quality computational grids. ■ With comprehensive technical support, even those new to simulations or busy with experiments can reliably achieve results. ◆ Compatible with various cases ◆ - Simulation of rarefied gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as Chemical Vapor Deposition (CVD), Organic Light Emitting Diodes (OLED), and Molecular Beam Epitaxy (MBE) ◆ Outputs various computational results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also conduct contract analysis, so please feel free to contact us.

• Other analyses

Date and Time: Thursday, July 23, 2026, 13:30 – 16:45 This seminar is recommended for those who use "Gaussian," the de facto standard for quantum chemistry calculations, and "GaussView6," which is essential for creating input files and visualizing results, but want to learn more effective settings and convenient features. We also offer a free attendance benefit for those who have contracted paid support. Please make use of this for advanced research and data-driven development! For more details, click here (to the Hulinks page) https://www.hulinks.co.jp/seminar/gaussian-gaussview-intermediate/

Nitto Kohki will exhibit at "BATTERY JAPAN - Secondary Battery Exhibition" held at Makuhari Messe Hall 7 from September 9 (Wednesday) to September 11 (Friday), 2026. [Booth Number: E22-6] ■ Introduction of Exhibited Products At this exhibition, we will showcase rapid fluid couplings that can quickly connect and disconnect piping for various fluids such as air, water, oil, and chemical solutions. Highlighted products include the "Zero Spill Coupler," which significantly reduces liquid dripping during disconnection and contributes to improving the working environment, as well as the new "Large Diameter Zero Spill Coupler." Additionally, we offer over 100 varieties in the "High Coupler" series, categorized by body material and mounting size.

Anritsu will exhibit at the comprehensive digital innovation exhibition "CEATEC 2026." On Thursday, October 15, we will give a presentation at the conference. We look forward to your visit. <Presentation Information> "Anritsu's 'Measuring' Technology, Its Evolution, and the Future of Pharmaceutical Manufacturing - The World's First Transmission-Type NIR Tablet Inspection System Ariphas" Date and Time: Thursday, October 15, 14:00 - 15:00 Location: E Stage within the exhibition hall (Hall 8) Speaker: Eiji Taniguchi (Anritsu Corporation, Infivis Company, Healthcare Business Division, Development Department, Product Development Team Leader) <Exhibition Information> Name: CEATEC 2026 Dates: Tuesday, October 13 - Friday, October 16, 2026 Location: Makuhari Messe Our Booth: Hall 4, 4H55 Please register for your visit on the official website. We look forward to seeing you.

Donaldson will hold a global webinar for manufacturing, quality, and equipment personnel from dairy manufacturers. We look forward to your participation. Theme: Best Practices and Audit Responses for Filtration Solutions in Dairy Plants Filtration technology in the dairy manufacturing process is a crucial element for improving product safety and ensuring stable operation of production lines. In this webinar, specialists from Donaldson's dairy filtration technology department will present best practices that can be implemented on-site and specific approaches to prepare for high-level quality audits. Featured Experts: Mr. Jan Verdoodt: Donaldson Director Mr. Dominik Michel: Donaldson Senior Manager Notes: - This webinar is part of a global program and will start at 23:00 Japan time. - All content will be delivered in English. There will be no support in Japanese. - There are no plans for an archived broadcast. *If you have any questions, please contact us via the inquiry form.

Hamai Corporation will be exhibiting at the 3rd [Kyushu] Semiconductor Industry Exhibition. We will showcase a wide range of products related to the semiconductor industry, including our ball valves, high-pressure gas valves, and hydrogen valves. We invite you to visit our booth. For more details about the exhibition booth and other information, please check the related links below.