New Japan Radio has started mass production of the NJU9103, an analog front-end with built-in PGA, ideal for pressure gauges and flow meters.

Eight clock outputs that can be set to eight phases.

**Overview** The LTC6909 features eight individual outputs, providing up to eight rail-to-rail 50% duty cycle clock signals. These outputs can be used to enable/disable multiple switching regulators or to achieve phase synchronization. Phase synchronization offers numerous design advantages, including improved EMI performance, reduced input and output ripple current, and enhanced load transient response. Additionally, by using three logic inputs, the phase relationship between these outputs can be set within a range of 45° to 120°, or the outputs can be set to logic "L" or high-impedance state. A single resistor is used to select the output frequency in the range of 12.5 kHz to 6.67 MHz. The LTC6909 also includes a Spectrum Spread Frequency Modulation (SSFM) feature, which is a technique for modulating the clock frequency with a pseudo-random signal. SSFM can be easily enabled and provides a method to reduce peak electromagnetic radiation. The amount of frequency spreading is fixed at ±10% of the center frequency, and the user can select one of three modulation rates.

• Other semiconductors

Dual isolated RS232 μModule transceiver with built-in isolated power supply.

**Overview** The LTM2882 uses signal isolation functionality through inductive elements to break the logic level loop, significantly expanding the common-mode voltage range and achieving an excellent common-mode rejection ratio of over 30kV/μs. It generates a power supply that drives RS232 levels with a low EMI DC-DC converter and provides an additional isolated 5V power output to supply power to any external support components. The LTM2882 features 2,500VRMS galvanic isolation, an auxiliary power supply, and two fully compliant RS232 transmitters and receivers, eliminating the need for external components and providing a complete and compact μModule solution for isolated serial data communication.

• Other semiconductors

16-bit 80Msps ADC with minimum power consumption to reduce noise in the data conversion system.

**Overview** The LTC2259-16 is a pin-compatible upgrade device to the already available low-power 14-bit ADC family LTC2259-14. It achieves the lowest power consumption for a single 16-bit ADC with double data rate (DDR) CMOS/LVDS output. In addition to significant power savings, the LTC2259-16 features two useful functions: alternate bit polarity (ABP) and a data output randomizer, which help reduce digital feedback noise. These features simplify design work using high-speed ADCs in applications such as HD broadcast cameras, IMO radars, Ethernet testers, portable test equipment and measurement instruments, software-defined radios, and cellular base stations.

• Other semiconductors

Rail-to-rail operational amplifier achieving maximum efficiency at 180MHz with 1mA.

The LTC6246/LTC6247/LTC6248 achieves a gain bandwidth of 180MHz and a slew rate of 90V/μs using a power-efficient SiGe process, while keeping the maximum supply current to just 1mA per amplifier. These single, dual, and quad operational amplifiers feature rail-to-rail input and output as well as a wideband noise of 4.2nV/√Hz. The LTC6246/LTC6247/LTC6248 are designed to achieve the highest speed and maximum power efficiency possible for rail-to-rail amplifiers without degrading DC characteristics. The input offset voltage is specified at a maximum of 500μV, and the open-loop gain is 45V/mV.

• Other semiconductors

A low saturation type regulator with a minimum output voltage of 0.8V, enhanced analog characteristics such as output voltage accuracy and load stability.

Io=500mA Low Output Voltage Low Saturation Regulator Despite a minimum output voltage of 0.8V, this low saturation regulator enhances analog characteristics such as output voltage accuracy and load stability. 【Overview】 The NJM2841 is a low saturation regulator that supports low output voltages down to 0.8V. Utilizing a bipolar process, it achieves low noise and high ripple rejection, while supplying a separate power source (VBIAS) for the control circuit, ensuring good load stability and transient response even during low input-output voltage operation. This makes it ideal for core voltage supply applications in digital devices such as CPUs, DSPs, and ASICs. It is housed in a compact SOT-23-5 package with an output current of 500mA, and is compatible with small 4.7μF ceramic capacitors, allowing for a reduction in mounting area.

• Other semiconductors

Contributed to reducing the development costs of cradle speakers and improving stereo sound quality.

eala Stereo Expander with Push Button Interface Electronic Volume 【Overview】 The NJU7392 is an electronic volume with a built-in push button interface and eala Stereo Expander. This product features a dual-input selector, sound field adjustment function compatible with closely spaced speakers (eala Stereo Expander), push button electronic volume, and a bass boost function with a limiter. Additionally, the standby function allows for reduced power consumption of the set. Various modes can be controlled via push buttons or switches, eliminating the need for a microcontroller. It is ideal for applications such as cradle speakers for portable audio players and handheld gaming devices where speaker spacing is narrow.

• Other semiconductors

Audio stereo A/D converter supports a sampling frequency of fs=8kHz to 192kHz while achieving low power consumption.

**Overview** The NJU3610 is a stereo A/D converter that supports sampling frequencies from 8 to 192 kHz, utilizing 1-bit ΔΣ technology to achieve high precision and low power consumption. The input circuit features fully differential inputs and is equipped with a stereo 4-to-1 selector. It can operate with dual power supplies of 1.8V/3.3V or a single power supply of 3.3V. The NJU3610 is ideal for various consumer audio devices such as digital TVs, soundbars, and speaker systems.

• Other semiconductors

Low voltage operation video amplifier with built-in LPF.

Overview: The NJM2561A is a low-voltage video amplifier with a built-in low-pass filter (LPF). It operates at a supply voltage of 2.6 to 5.5V, allowing for low-voltage operation, and features a built-in 75Ω driver circuit, enabling direct connection to video equipment such as TV monitors. The input supports composite video signals and includes a mute circuit that also serves power-saving functions, making it suitable for low power consumption designs. Additionally, its compact package (ESON6) makes it ideal for portable devices such as DSCs, DVCs, and surveillance cameras.

• Other semiconductors

Analog input filterless monaural 1.5W output Class D power amplifier

Low voltage operation, filterless output, and 1.5W output make it ideal for battery-powered device speaker amplifiers. 【Overview】 The NJU8758 is a filterless Class D power amplifier that operates over a wide range from 1.8V to 5.5V. The output is in a BTL configuration, eliminating the need for coupling capacitors and providing an output of 1.5W. Additionally, since an output LC filter is not required, the number of external components can be reduced. The output terminals are equipped with a built-in short-circuit protection circuit that protects the IC during short circuits between the output terminals and between the output terminals and ground. With its Class D operation, it offers high power efficiency, making it ideal for small consumer devices such as security equipment, portable devices, portable audio equipment, and laptops.

• Other semiconductors

We are lined up according to the measurement distance.

The demand for body detection sensors in machines is expected to expand. Additionally, if it is an analog output type, it can detect the distance between the target (person) and the sensor in an analog manner, which can also be used to determine behaviors such as "getting closer to the sensor." 【Product Lineup】 Distance Measuring Sensor

• Sensors
• Image analysis software
• Other FA equipment

Even transparent objects can reflect, so it can be applied to things that cannot be detected by light.

The MKT Taisei's splash-proof airborne ultrasonic sensor emits ultrasonic waves into the air and receives reflected waves from objects to measure the presence of objects or the distance to them. It is compact, lightweight, robust, and features high sound pressure and high sensitivity. It has low power consumption and excellent environmental resistance. 【Product Lineup】 Splash-proof airborne ultrasonic sensor

• Sensors
• Analytical Equipment and Devices
• Other process controls

Replace with silicone! Maintains high-speed switching even at high temperatures, reducing power loss!

The "SiC-SBD series" is a Schottky barrier diode made from SiC (silicon carbide) material. It supports low resistance and high-speed switching, which can reduce switching losses. Additionally, it can operate stably at high temperatures, enabling the miniaturization of power devices. It is effective in high-speed switching applications such as PFC circuits, motor drive circuits, and inverter circuits. 【Features】 ■ Reduction of switching losses due to high-speed switching characteristics ■ Improvement of power conversion efficiency and capability for high frequency ■ Reduction of leakage current at high temperatures ■ Prevention of thermal runaway due to increased current *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other semiconductors
• Weight related measuring instruments
• Analytical Equipment and Devices

We can provide a wide range of proposals tailored to your needs.

The light sensor from New Japan Radio is equipped with a visual sensitivity correction filter. It is less susceptible to infrared interference and has good linearity over a wide range of illuminance (0.1 to 100,000 Lux). It supports a peak sensitivity wavelength of 560 nm, a sensitivity wavelength range of 350 to 650 nm, a photocurrent of 270 nA ± 15%, and an illuminance detection range of 0.1 to 100,000 Lux (conditions: VR=0V, Ta=25°C). 【Product Lineup】 Light Sensor

• Sensors
• Lighting for image processing
• Other lighting equipment

We can provide a wide range of proposals tailored to your needs.

【Product Lineup】 Operational Amplifiers Video Amplifiers Audio Amplifiers Comparators A/D Converters D/A Converters Analog Switches Digital Potentiometers Linear Regulators Switching Regulators DC/DC Converters Reset ICs Battery Chargers References ICs for Crystal Oscillators Silicon Oscillators RS232, RS485, RS422 Interfaces LED Drivers LCD Drivers Motor Drivers Wireless Modules (Bluetooth, Wireless LAN, GPS)

• Other semiconductors
• Weight related measuring instruments
• Analytical Equipment and Devices

In civil engineering sites, there are many instances where temporary roads, access routes, material storage areas, and pedestrian pathways use wooden boards. In residential areas, near schools, hospitals, and stores, the noise from construction, glare, and the appearance of the site can affect the impression on nearby residents, so consideration for temporary materials is required. Hyper CLT boards are civil engineering materials that utilize wood CLT. As wooden boards, they can be used as an alternative to steel plates, for muddy ground measures, ground protection, heavy machinery scaffolding, and worker pathways. The unique texture of wood provides a softer impression compared to metal plates, contributing to the improvement of the site environment. Additionally, they can be used as materials for proposals that address neighborhood concerns and environmental considerations, such as reducing metal noise, suppressing glare, and fixing CO2. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to handle even with small machinery. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they are also recommended for innovative ideas and safety measures in public works. We encourage you to consider creating civil engineering sites that take into account the surrounding area. We can also propose locations and quantities tailored to site conditions. Please feel free to contact us for material requests or consultations on implementation. They can also be utilized in urban construction and private projects. Don't hesitate to reach out.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many instances where temporary roads, access roads, heavy machinery work yards, and material storage areas use ground plates. While conventional steel plates are practical, they can sometimes fail to leave a lasting impression when it comes to the appearance of the site and conveying the company's initiatives. Hyper CLT ground plates are civil engineering materials that utilize wood CLT. As ground plates with the texture of wood, they can be used as a substitute for steel plates, for mud prevention, ground protection, and ensuring pedestrian pathways. By introducing them in visible areas such as site entrances, morning assembly locations, and around break areas, it becomes easier to create an impact that differs from traditional sites. The 5×10 plate weighs about 230 kg, and the 5×20 plate weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which helps reduce construction burdens. They also offer advantages such as glare reduction, noise reduction, and environmental considerations unique to wood, making them suitable for innovative public works projects. Registered as a Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A," they are recommended for companies aiming to create a distinctive impression at their sites. We can also provide consultation for small lot introductions and suggest usage methods tailored to site conditions. Why not add a clear change to your civil engineering site with these new wooden ground plates?

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.