Notice of participation in the 25th Fluid Power International Exhibition IFPEX2017 from September 13 to September 15【East 4: F-40】

The size is interchangeable due to compliance with ISO standards. The type that sets parameters via the fieldbus interface has real-time diagnostic capabilities.

The mounted digital driver controls the hydraulic pressure of the valve according to the command signal. The digital hydraulic equipment features high performance with over 20 types of alarms compared to the analog diagnostic function that only provides fault signals. Additionally, due to the use of digital information, it has high resistance to electromagnetic noise and explosion-proof specifications are also available. 【Features of Digital Hydraulic Equipment】 ■ More functions and parameters (e.g., linearization, PID) ■ High reproducibility and numerical soft setting ■ Enhanced diagnostic functions… open circuit detection, control monitoring, temperature range, etc. ■ Direct fieldbus interface 　… improved accuracy and durability, more information available 　… direct connection to the machine's communication network 　… CANopen / PROFIBUS DP / EtherCAT 【Specifications】 ■ Types: Directional control valve, pressure control valve, flow control valve ■ Sizes: 06, 10 (2-stage), 10 - 32 ■ Flow: Maximum 70–3500 L/min ■ Pressure: Maximum 350 bar

• Hydraulic Equipment
• Servo
• Other network tools

Available in "General Steel," "SUS 316," and "Copper Alloy (Medium Pressure)." Widely used in Europe and America.

In addition to standard throttle valves, there are various high-pressure products such as pressure-regulating valves and angle valves, which can be selected according to specifications. The materials include general steel and "high corrosion-resistant" stainless steel "SUS 316," as well as copper alloys suitable for use with hydraulic, water, and air pressure (*medium pressure). You can view a product overview catalog that summarizes the products handled by TOGNELLA and a catalog detailing the SUS 316 products. ● If you would like the catalog immediately, please click "Download Catalog"! ◎ If you prefer a printed version, please contact us.

• valve
• Water Hydraulic Equipment
• Hydraulic Equipment

Low noise and high heat exchange efficiency. Heat exchange equipment that can be used at high pressure.

This catalog features a wide range of heat exchange equipment, including water-cooled coolers (brazed plate type), air-cooled coolers (driven by AC or DC motors, hydraulic motors), and cooling units! 【Features (excerpt) / Air-cooled type】 Maintains heat balance with excellent performance. When used in hydraulic systems, it offers the following advantages: - The cooling system is independent of the water supply line (no water required) - Higher initial investment compared to water-cooled types, but lower running costs - Warm air can be used for heating in winter, among others If you would like the catalog now, please click "Download Catalog"! For a printed version, please contact us. ――――――――――――――――――――――――― ■□ We will be exhibiting at the '2018 New Environmental Exhibition' □■ Exhibition content: ◎ "Fan Plate Oil Cooler" (by Sesino) ◎ "High-Pressure Hydraulic Valve" (by Tognella) We will showcase various hydraulic equipment from different manufacturers, focusing on the above items. We will also distribute various catalogs. Period: May 22 - May 25, 10:00 AM - 5:00 PM Location: Tokyo Big Sight (East Hall 4: U511)

• Other machine elements
• Hydraulic Equipment
• others

Non-spill type that contributes to the prevention of water quality pollution and soil contamination! It prevents oil from leaking externally during attachment and detachment, and allows for attachment and detachment even when there is residual pressure.

The "VEP-HD" allows for safe coupling and uncoupling even with high residual pressure due to its triple valve system. At the same time, it prevents external oil leakage during coupling and uncoupling. It is designed with heavy-duty, high-pressure hydraulic applications in mind, considering high repetitive peak pressures and significant mechanical stress. The "VEP-HD" is made from high-tensile carbon steel and features a nitrided surface treatment that reduces wear on the coupling. This series underwent one million impulse tests during its development. 【Features】 ○ The flat face is easy to clean and effectively reduces contamination intrusion into the system. ○ There is no external leakage of operating oil during coupling and uncoupling, reducing environmental impact. ○ It minimizes air entrapment during coupling and uncoupling, aiding in optimal system operation.

• Coupling

For crushers, augers, drills, and more! The heavy-duty design "S" is the most powerful in the series with 500kW of durability!

The "S" is designed for heavy-duty use to continuously deliver high output, with a maximum output of 500kW. Recommended applications include crushers, augers, drills, and winches, with options for two-stage shifting and freewheeling based on usage. 【Features】 ○ Easy to use as an industrial "shaft rotation type" ○ Tapered roller bearings capable of withstanding high radial/axial loads ○ Automatic switching multi-speed function suitable for many applications

• Other motors
• Hydraulic Equipment

Compact and lightweight hydraulic manifold block. An excellent product that can handle high pressure and environmental conditions.

TSB (TOHTO System Block) is TOHTO's original hydraulic valve control block. The concept is "compact and lightweight" for hydraulic systems. We provide a one-stop solution from design, processing, assembly, to operational testing. Custom manufacturing is available for each specification and circuit diagram. The following are the main manufacturers we handle: *Note that we also handle many other manufacturers beyond those listed below.* - Delta Power - Danfoss - Sun - Bosch Rexroth Oil Control - Tecnord - Atos - Bieri - Brevini - Deltrol - Wandfluh - Walvoil

• valve
• Hydraulic Equipment

The goal is not to introduce AI. We will explain "standardization of manufacturing processes" to eliminate dependency and maximize the effectiveness of AI! While the spread of generative AI is progressing, there is an increasing number of manufacturing companies that say, "We don't know where to apply AI due to the black box nature of the site," and "Despite implementation, productivity hasn't increased." The cause lies not in the performance of AI, but in the "lack of business organization and standardization before implementation." In this webinar, we will clearly explain business improvement methods (BPMS) and how to properly organize business processes to avoid wasting AI investments, using case studies. [Recommended for those who:] - Are struggling to engage the field due to resistance like "busy" or "it's fine as it is." - Want to eliminate differences in rules between factories and locations, as well as dependency and black box issues with veteran employees. - Are being asked to "utilize AI" but don't know where to start due to disorganized business processes. [Here is the application form] https://www.earthlink.co.jp/seminar/10840/ *Pre-registration required (free) *We will give a "partial excerpt of the presentation materials" to those who respond to the survey after viewing.

[Speaker] Ms. Sayako Sumomo, Director, International Equipment Division, Equipment Policy Department, Acquisition, Technology & Logistics Agency [Key Lecture Content] As the security environment surrounding our country changes at an accelerating pace, the government is promoting defense equipment transfers as an important policy measure to create a desirable security environment for our nation. Promoting defense equipment transfers not only enhances regional deterrence and response capabilities for peace and stability in the Indo-Pacific region but also contributes to strengthening our country's defense production and technological base through market expansion and supply chain cooperation. Furthermore, the development of the defense industry and other industries with dual-use technologies can lead to growth in the Japanese economy. In this lecture, I will explain recent trends in defense equipment transfers, taking into account the recent revisions to the equipment transfer system. [Lecture Topics] 1. Japan's Defense Policy 2. Significance and System of Equipment Transfers 3. Recent Trends in Equipment Transfers 4. Government Initiatives 5. Q&A / Business Card Exchange

[Speaker] Hiroki Hara, Country Lead, Cloud & Service Provider Segment, Schneider Electric Holdings Co., Ltd. [Key Lecture Content] In the era of AI, it is essential to redesign not just the equipment but the very way energy is utilized in data centers. This presentation will organize the approach to power architecture aimed at enhancing competitiveness, taking into account global trends and the constraints of the Japanese market. Additionally, through Schneider Electric's comprehensive portfolio, which includes cooling and operations, we will provide perspectives for selecting optimal options in Japan's increasingly complex power environment, as well as hints for future implementations. [Lecture Items] 1. Introduction to Schneider Electric 2. Global megatrends and the external environment surrounding the data center industry 3. Architecture of data center power infrastructure - Design philosophy necessary for safely delivering electricity 4. Schneider's portfolio connecting power and cooling, design, construction, and operation 5. Unique challenges of the Japanese market and options for optimal solutions 6. Q&A / Business card exchange

[Speaker] Yuya Sato, Director, Innovation Management Co., Ltd. [Lecture Topics] 1. Main challenges in the field of research and development 2. Overview of research and development management 3. How to utilize "roadmaps" for formulating persuasive mid- to long-term strategies 4. How to utilize "technology portfolios" to achieve convincing resource allocation 5. "Gate management" to improve the success rate of highly innovative research and development themes 6. Integrated research and development management process 7. Q&A

Our TL Division will be exhibiting at the "Surface Treatment Processing Technology Exhibition 2026" to be held on June 26 (Friday) at the Osaka Industry Creation Center. We invite you to visit our booth to see our products and technologies. We sincerely look forward to your attendance. ■ Exhibition Name Surface Treatment Processing Technology Exhibition 2026 ■ Date June 26, 2026 (Friday) ■ Venue Osaka Industry Creation Center, 3F Market Plaza / 4F Event Hall ■ Exhibited Technology We will introduce optimal solutions for surface modification composites and ultra-hard coating removal by adding a new coating to Y-Coat, which leads the mold market. New Coating: Y-Coat Type UL Product Introduction Page