New Japan Radio has developed the "NJR4266 series," a low-profile, low-power microwave sensor with built-in signal processing capabilities. Low profile: 40% reduction compared to conventional models / Low power consumption: 96% reduction compared to conventional models.

[Proposal Series for Circuit Designers] A collection of numerous case studies addressing challenges related to heat resistance, heat dissipation, noise reduction, and space-saving!

In the design and manufacturing of industrial equipment, issues related to heat and noise, as well as space-saving challenges, are inevitable. Are there any concerns that you have that cannot be addressed with your current product lineup? At Orinas, we select products from a wide range of manufacturers and provide optimal solutions to challenges such as heat resistance, heat dissipation, noise, and space-saving. 《A collection of numerous proposal examples! Case studies for problem-solving》 【Table of Contents】 - Solutions for noise-related issues - Solutions for heat-related issues - Solutions for space-saving issues ● Please download the PDF to view our proposal series.

• Printed Circuit Board
• Semiconductor inspection/test equipment
• power supply

Eight clock outputs that can be set to eight phases.

**Overview** The LTC6909 features eight individual outputs, providing up to eight rail-to-rail 50% duty cycle clock signals. These outputs can be used to enable/disable multiple switching regulators or to achieve phase synchronization. Phase synchronization offers numerous design advantages, including improved EMI performance, reduced input and output ripple current, and enhanced load transient response. Additionally, by using three logic inputs, the phase relationship between these outputs can be set within a range of 45° to 120°, or the outputs can be set to logic "L" or high-impedance state. A single resistor is used to select the output frequency in the range of 12.5 kHz to 6.67 MHz. The LTC6909 also includes a Spectrum Spread Frequency Modulation (SSFM) feature, which is a technique for modulating the clock frequency with a pseudo-random signal. SSFM can be easily enabled and provides a method to reduce peak electromagnetic radiation. The amount of frequency spreading is fixed at ±10% of the center frequency, and the user can select one of three modulation rates.

• Other semiconductors

Dual isolated RS232 μModule transceiver with built-in isolated power supply.

**Overview** The LTM2882 uses signal isolation functionality through inductive elements to break the logic level loop, significantly expanding the common-mode voltage range and achieving an excellent common-mode rejection ratio of over 30kV/μs. It generates a power supply that drives RS232 levels with a low EMI DC-DC converter and provides an additional isolated 5V power output to supply power to any external support components. The LTM2882 features 2,500VRMS galvanic isolation, an auxiliary power supply, and two fully compliant RS232 transmitters and receivers, eliminating the need for external components and providing a complete and compact μModule solution for isolated serial data communication.

• Other semiconductors

16-bit 80Msps ADC with minimum power consumption to reduce noise in the data conversion system.

**Overview** The LTC2259-16 is a pin-compatible upgrade device to the already available low-power 14-bit ADC family LTC2259-14. It achieves the lowest power consumption for a single 16-bit ADC with double data rate (DDR) CMOS/LVDS output. In addition to significant power savings, the LTC2259-16 features two useful functions: alternate bit polarity (ABP) and a data output randomizer, which help reduce digital feedback noise. These features simplify design work using high-speed ADCs in applications such as HD broadcast cameras, IMO radars, Ethernet testers, portable test equipment and measurement instruments, software-defined radios, and cellular base stations.

• Other semiconductors

Rail-to-rail operational amplifier achieving maximum efficiency at 180MHz with 1mA.

The LTC6246/LTC6247/LTC6248 achieves a gain bandwidth of 180MHz and a slew rate of 90V/μs using a power-efficient SiGe process, while keeping the maximum supply current to just 1mA per amplifier. These single, dual, and quad operational amplifiers feature rail-to-rail input and output as well as a wideband noise of 4.2nV/√Hz. The LTC6246/LTC6247/LTC6248 are designed to achieve the highest speed and maximum power efficiency possible for rail-to-rail amplifiers without degrading DC characteristics. The input offset voltage is specified at a maximum of 500μV, and the open-loop gain is 45V/mV.

• Other semiconductors

A low saturation type regulator with a minimum output voltage of 0.8V, enhanced analog characteristics such as output voltage accuracy and load stability.

Io=500mA Low Output Voltage Low Saturation Regulator Despite a minimum output voltage of 0.8V, this low saturation regulator enhances analog characteristics such as output voltage accuracy and load stability. 【Overview】 The NJM2841 is a low saturation regulator that supports low output voltages down to 0.8V. Utilizing a bipolar process, it achieves low noise and high ripple rejection, while supplying a separate power source (VBIAS) for the control circuit, ensuring good load stability and transient response even during low input-output voltage operation. This makes it ideal for core voltage supply applications in digital devices such as CPUs, DSPs, and ASICs. It is housed in a compact SOT-23-5 package with an output current of 500mA, and is compatible with small 4.7μF ceramic capacitors, allowing for a reduction in mounting area.

• Other semiconductors

Contributed to reducing the development costs of cradle speakers and improving stereo sound quality.

eala Stereo Expander with Push Button Interface Electronic Volume 【Overview】 The NJU7392 is an electronic volume with a built-in push button interface and eala Stereo Expander. This product features a dual-input selector, sound field adjustment function compatible with closely spaced speakers (eala Stereo Expander), push button electronic volume, and a bass boost function with a limiter. Additionally, the standby function allows for reduced power consumption of the set. Various modes can be controlled via push buttons or switches, eliminating the need for a microcontroller. It is ideal for applications such as cradle speakers for portable audio players and handheld gaming devices where speaker spacing is narrow.

• Other semiconductors

Audio stereo A/D converter supports a sampling frequency of fs=8kHz to 192kHz while achieving low power consumption.

**Overview** The NJU3610 is a stereo A/D converter that supports sampling frequencies from 8 to 192 kHz, utilizing 1-bit ΔΣ technology to achieve high precision and low power consumption. The input circuit features fully differential inputs and is equipped with a stereo 4-to-1 selector. It can operate with dual power supplies of 1.8V/3.3V or a single power supply of 3.3V. The NJU3610 is ideal for various consumer audio devices such as digital TVs, soundbars, and speaker systems.

• Other semiconductors

Low voltage operation video amplifier with built-in LPF.

Overview: The NJM2561A is a low-voltage video amplifier with a built-in low-pass filter (LPF). It operates at a supply voltage of 2.6 to 5.5V, allowing for low-voltage operation, and features a built-in 75Ω driver circuit, enabling direct connection to video equipment such as TV monitors. The input supports composite video signals and includes a mute circuit that also serves power-saving functions, making it suitable for low power consumption designs. Additionally, its compact package (ESON6) makes it ideal for portable devices such as DSCs, DVCs, and surveillance cameras.

• Other semiconductors

Analog input filterless monaural 1.5W output Class D power amplifier

Low voltage operation, filterless output, and 1.5W output make it ideal for battery-powered device speaker amplifiers. 【Overview】 The NJU8758 is a filterless Class D power amplifier that operates over a wide range from 1.8V to 5.5V. The output is in a BTL configuration, eliminating the need for coupling capacitors and providing an output of 1.5W. Additionally, since an output LC filter is not required, the number of external components can be reduced. The output terminals are equipped with a built-in short-circuit protection circuit that protects the IC during short circuits between the output terminals and between the output terminals and ground. With its Class D operation, it offers high power efficiency, making it ideal for small consumer devices such as security equipment, portable devices, portable audio equipment, and laptops.

• Other semiconductors

Replace with silicone! Maintains high-speed switching even at high temperatures, reducing power loss!

The "SiC-SBD series" is a Schottky barrier diode made from SiC (silicon carbide) material. It supports low resistance and high-speed switching, which can reduce switching losses. Additionally, it can operate stably at high temperatures, enabling the miniaturization of power devices. It is effective in high-speed switching applications such as PFC circuits, motor drive circuits, and inverter circuits. 【Features】 ■ Reduction of switching losses due to high-speed switching characteristics ■ Improvement of power conversion efficiency and capability for high frequency ■ Reduction of leakage current at high temperatures ■ Prevention of thermal runaway due to increased current *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other semiconductors
• Weight related measuring instruments
• Analytical Equipment and Devices

We provide high value-added programmable solutions to over 13,000 customers worldwide.

Altera's FPGAs continue to lead innovation in programmable logic. They are programmable solutions with high added value, integrating FPGA, CPLD, and HardCopy ASIC with development software, IP (Intellectual Property), and customer support. 【Product Lineup】 FPGA CPLD

• Other semiconductors
• Signal Generator
• Image Processing Equipment

We can provide a wide range of proposals tailored to your needs.

【Product Lineup】 Operational Amplifiers Video Amplifiers Audio Amplifiers Comparators A/D Converters D/A Converters Analog Switches Digital Potentiometers Linear Regulators Switching Regulators DC/DC Converters Reset ICs Battery Chargers References ICs for Crystal Oscillators Silicon Oscillators RS232, RS485, RS422 Interfaces LED Drivers LCD Drivers Motor Drivers Wireless Modules (Bluetooth, Wireless LAN, GPS)

• Other semiconductors
• Weight related measuring instruments
• Analytical Equipment and Devices

● What is a hydrogen leak detector? It can measure leaks in small areas that could not be detected in air leak tests and can also identify the leak locations. It is a detector that uses a mixture of 5% hydrogen and 95% nitrogen (non-flammable gas: ISO10156:2017) as the tracer gas. ● What is a helium leak test system? It is a leak test system suitable for high-precision or high-pressure leak inspections. The helium leak test system uses helium gas as the detection gas (tracer gas) and detects the helium that has leaked out. It is the leak test method among Fukuda's leak testers that can detect the smallest leaks.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.