[New Product] Ultra High-Speed I/V Converter (Current to Voltage Converter) T-IVA001HS

【Demo unit available for loan!】Switchable current-voltage conversion rates of 10G[V/A] and 100G[V/A] with ultra-wideband characteristics from DC to 10kHz!

The ultra-high-speed I/V converter (current-to-voltage converter) T-IVA001HS features a current-to-voltage conversion rate of 10G[V/A] and 100G[V/A] with a switchable option, offering ultra-wideband characteristics from DC to 10kHz. Additionally, the output voltage is ±10Vpk. The existing product T-IVA001HZ had an upper limit of 2kHz, but in response to customer requests, we have achieved a high-speed model. This characteristic expands the range of measurement applications. Furthermore, it has been made smaller, lighter, and more affordable. *For more details, please download the materials or contact us.*

• Other measurement, recording and measuring instruments

The hyper CLT sheets come in two sizes: 5×10 and 5×20. Key points for selection include the size of the site, the installation location, the heavy machinery used, and the frequency of replacement. The 5×10 sheet measures approximately 1.5m × 3m and weighs about 230kg. It is easy to handle even with small machinery, making it suitable for sites where partial installation is desired, such as worker pathways, around rest areas, material yards, and temporary parking lots. A 10-ton truck can carry up to 40 sheets, which also enhances transportation efficiency. On the other hand, the 5×20 sheet measures approximately 1.5m × 6m and weighs about 460kg. It can cover a large area with a single sheet, making it suitable for long access roads, temporary roads, and spacious heavy machinery work yards. It is also characterized by its ability to reduce seams. In some cases, combining both sizes can be an effective approach. The hyper CLT sheets are civil engineering CLT materials utilizing wood and are registered with the Ministry of Land, Infrastructure, Transport and Tourism under the NETIS technology "TH-250021-A." Choosing the right size according to site conditions can enhance workability and usability.

SPACECOOL Co., Ltd. announces that Nikkei Kinzoku Act Co., Ltd., part of the Japan Light Metal Group, has introduced the "SPACECOOL Roof Shade" on approximately 4,000 square meters of the roof at its Kamihara factory. This introduction aims to improve the hot environment within the factory during the summer, reduce the risk of heatstroke for employees, and create a workplace environment where employees can work with peace of mind, which will also contribute to future recruitment efforts. - Comment from Kazunori Kiyosawa, Group Leader of the Equipment Group at Nikkei Kinzoku Act Co., Ltd. Kamihara Factory We believed that measures against heat in the factory are essential for protecting employee safety. While considering measures that could be implemented without stopping factory operations, we learned about SPACECOOL. After comparing and verifying it against heat-insulating paints and other options, we confirmed that SPACECOOL had the highest effectiveness. We also felt that being able to experience the installation work firsthand and carry out repairs ourselves afterward is a significant advantage. As temperatures are expected to rise in the future, we aim to create a workplace environment that prevents heatstroke and will continue to work on measures against heat. For inquiries regarding this product, please contact Japan Wide Cross Co., Ltd.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.