We exhibited at the 31st Plant Show INCHEM TOKYO 2017!

Is the tank truck properly grounded? The Earth-Rite RTR can guarantee that it is properly grounded!

The Earth-Rite RTR is a device that can prevent accidents caused by grounding work during filling and discharging operations in tank truck vehicles. For example, during the filling operation of a tank truck, the operator may connect the grounding wire to an incorrect grounding point on the tank truck, or the grounding wire may become disconnected during liquid transport. In such cases, the tank truck can become charged to 10-30 kV within 15-50 seconds. This level is sufficient to cause ignition or explosion due to static electricity. The Earth-Rite RTR continuously monitors to ensure that the grounding connection is correct and that the grounding resistance is appropriate. If there is a problem with the connection status, it can issue an alarm to the upper side via internal contact output (interlock function). This signal allows the customer’s equipment to stop the pump or sound a siren.

• Other safety equipment
• Anti-static products
• Other anti-static devices

Sampling is possible from various piping conditions such as pressurized states and high-temperature states without changing the physical properties of the liquid!

I want to prevent the alteration of liquids during sampling! I want to sample liquids while containing them! I want to safely sample liquids from pipes under pressure or at high temperatures! We solve problems related to sampling. With a rich combination of options, liquid sampling is possible in various situations and environments. For example... High-temperature liquids ⇒ Adapters for operator protection Oxidizing liquids ⇒ Nitrogen replacement in the sampling container can be done in advance Crystallizing liquids ⇒ Heating jackets can be installed Liquids under reduced pressure ⇒ Syringe-type adapters It is also possible to change materials according to the properties of the liquid being sampled or to modify connection methods to fit existing piping (such as JIS flange connections, ferrule connections, etc.).

• valve
• Chemicals

No need to open the manhole for sampling from the reaction tank! Sampling can be done while containing the conditions inside the tank!

I want to safely sample liquid from the reaction vessel! I want to prevent the alteration of the liquid during sampling! I want to sample the liquid while containing it. We solve problems related to sampling. With a rich combination of options, liquid sampling is possible in various situations and environments. Nitrogen replacement for sample containers is also possible. To sample from the reaction vessel, you have no choice but to open the manhole... With BIAR's reaction vessel sampling system, there is no need to open the manhole. Sampling can be done safely and efficiently. Since it operates with compressed air instead of an electric pump, it can be used in explosion-proof areas without any issues.

• valve
• Chemicals

It is possible to sample liquids without changing their physical properties while preventing foreign matter contamination. No need to open the manhole for sampling from the reaction vessel!

I want to safely sample liquids! I want to prevent the alteration of liquids during sampling! We solve problems related to sampling. With a rich combination of options, liquid sampling is possible in various situations and environments. Nitrogen replacement for sample containers is also available. To sample from a reaction vessel, you have no choice but to open a manhole... With BIAR's reaction vessel sampling system, there is no need to open a manhole. Sampling can be done safely and efficiently. Since it operates with compressed air instead of an electric pump, it can be used in explosion-proof areas without any issues.

• valve
• Other physicochemical equipment
• Other safety and hygiene products

Sampling is possible from piping under high temperature and pressure, as well as from reaction vessels during reactions! Oxidation risks and toxic liquids are also acceptable!

The BIAR company's "Liquid Sampling System" is a system that allows for the safe and efficient sampling of "high-temperature liquids," "toxic liquids," and "liquids that react with oxygen" from piping and reaction vessels under high temperature and pressure. It prevents foreign matter contamination and enables liquid sampling without altering the physical properties. Additionally, you can view a cut model that clearly shows the structure of the valve. 【Features】 ■ Operates with compressed air, eliminating the need for electric pumps, making it suitable for use in explosion-proof areas. ■ Ideal for the fields of chemistry and medicine. ■ Allows for liquid sampling without exposure to air. ■ Accessories for discharge can be shared. ■ Materials can be changed to SUS316L, Hastelloy, PFA coating, etc. *For more details, please download the catalog or contact us.

• valve
• Other physicochemical equipment
• Other safety and hygiene products

We will be exhibiting at the J AGRI (J Agri) / Agricultural Materials EXPO held at Gran Messe Kumamoto from May 22 (Wednesday) to May 24 (Friday), 2024. 【Booth Number】: B1-43 Outdoor Exhibition Area Japan's largest comprehensive exhibition for agriculture and livestock, Agricultural WEEK, will be renamed J AGRI starting in 2024. This is a place where you can actually see, touch, and compare products. At our booth, we will showcase our lightweight resin flooring boards "JULIGHT / SUPER JULIGHT / RAKURAKUBAN" along with new products. Starting with the agricultural-specific flooring board "RAKURAKUBAN," which can be easily laid in various scenes such as around greenhouses, agricultural work sites, temporary parking lots, for the movement of agricultural machinery and light trucks, and for protecting truck beds, there are various ways to use the lightweight resin flooring boards "JULIGHT / SUPER JULIGHT series." We offer a variety of sizes and protrusion shapes tailored to customer needs, and they are lightweight enough to be carried by hand, with excellent impact resistance, as well as superior water resistance, weather resistance, and durability, providing outstanding features not found in plywood or steel plates. We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

[Speaker] Toshio Fujimura, Ph.D. (Engineering) Representative, Touson Automotive Strategy Research Institute Automotive and Environmental Technology Strategy Analyst Visiting Professor, Aichi Institute of Technology [Former Toyota Motor Corporation] [Lecture Topics] <Chapter 1> Urgent Issue: CO2 Reduction Cannot Wait! <Chapter 2> Achieving a 48% Reduction in CO2 by 2030 Compared to 2019 is Impossible Without Carbon Neutrality in Fuels as Well as Electricity <Chapter 3> Technical Challenges in Electrification <Chapter 4> Pathways to Achieve a 48% Reduction in CO2 Emissions from Owned Vehicles by 2030 <Chapter 5> The Intentions Behind Electrification Strategies of Various Governments (Mainly in Europe, the U.S., and China) <Chapter 6> Electrification Strategies of Major Global Automakers and Sales Trends in Different Regions: Which Manufacturers Will Survive by 2030? <Chapter 7> Conclusion

[Speaker] Masayuki Sawada, Director of Sawada Masayuki Engineering Office [Lecture Topics] 1. The battle in Ukraine is the first large-scale drone war in history. 2. The battle in Iran also sees drones shifting the paradigm of strategy and tactics. 3. Efforts by major European countries (producing drones in Ukraine and collaborating with Ukrainian drone manufacturers). 4. Efforts by the United States (providing intercept drones and other support to Ukraine). 5. Efforts by Taiwan (producing drones in collaboration with U.S. manufacturers that have combat experience in Ukraine). 6. Efforts by Japan's Ministry of Defense (establishing a multi-layered coastal defense system using drones [SHIELD]). 7. Efforts by Japan's Terra Drone Corporation (collaborating with Ukrainian drone manufacturers). 8. Q&A / Business card exchange.