We have introduced a digital microscope.

It is possible to produce metal foil with a surface roughness at the single nanometer level in the form of a hoop-shaped roll extending up to 100 meters.

We perform mirror finishing on various metal foils (such as SUS304, copper, aluminum, brass, nickel, molybdenum, tungsten foil, etc.) using our unique wrapping processing technology. We have independently developed an automatic mirror finishing device that continuously supplies, polishes, and rolls up long tape-like metal foils. In addition to long strips, we also accept mirror polishing of metal foils in desired shapes (from a thickness of 0.001mm). For long strips, we can accommodate thicknesses starting from 0.01mm (depending on the material) and sizes up to 300mm (based on past performance). 【Supported Materials】 SUS304, copper, aluminum, brass, nickel, molybdenum, tungsten foil, etc., with plans for gradual expansion. For more details, please contact us.

• Processing Contract

Achieved ultra-precise spacers/shims with sub-micron tolerances through precision grinding. This enables high-precision fine adjustments in the assembly of precision equipment and molds.

Ultra-precise assemblies can be achieved with submicron tolerance shims. At TDC, we offer standard shims in sizes ranging from M2 to M8. Additionally, we can manufacture washers, corner plates, and other shapes, sizes, and quantities as per your requirements. Please let us know your specifications. We accept orders starting from one piece. Feel free to request a quote. Furthermore, TDC has developed "Mirror Fit Spacers" with a mirror finish on the surface. Shims finished to a mirror surface have minimal displacement when used in assembly, providing excellent dimensional stability. For more details, please contact our sales representative. For additional information, you can download our catalog, and we also have a web catalog available.

• stainless

High-performance film, ultra-precision mirror rolls that enable further innovation in thin film manufacturing processes. Surface roughness achieves Ra1.5 nanometers!

Through TDC's ultra-precision polishing technology, we achieve nano-level surface roughness while maintaining dimensional accuracy and roundness. For example, are you struggling with substrate scratches before creating fine patterns on transfer rolls? Mirror finishing of the outer diameter of rolls and shafts. Surface roughness is achieved at Ra1.5nm and above. We realize a higher level of mirror finish! We accommodate from a single piece to mass production. Sizes can be accommodated up to a maximum of 2.5 meters. 【Supported Materials】 Stainless steel, titanium, aluminum, glass, various coated surfaces (nickel plating, chrome plating, hard chrome plating, etc.) <<< You can check the surface roughness inspection results of stainless steel and hard chrome plated surfaces by enlarging the image on the left <<< We also support other materials. Please contact us. ▼▼▼ We want you to know more about TDC's processing technology ▼▼▼ 　【Free booklet 'Value Engineering with Polishing' available!】 　★ You can download the booklet and various catalogs from the catalog download button below ★ Surface roughness of around 1 nanometer is possible for most materials!! TDC's ultra-precision mirror finishing technology.

• Processing Contract

We achieve ultra-precision machining accuracy in almost all processing elements such as mirror finishing, flatness, parallelism, dimensions, spherical surfaces, curved surfaces, and angles.

We achieve not only mirror surface roughness but also high precision in flatness, parallelism, and dimensional accuracy simultaneously. We accommodate everything from one-off items to mass production as needed. It is possible to realize ultra-precise surface accuracy for all materials and shapes. 【Supported Materials】 ○ Metals → General steel materials, carbide, stainless steel, copper, titanium, aluminum, molybdenum, tungsten, nickel, tantalum, and various others. ○ Ceramics → Alumina, zirconia, sapphire, silicon, silicon carbide, silicon nitride, etc. → Polishing of coated surfaces such as thermal spraying is also possible. ○ Crystal Materials → General glass materials, silicon, SiC, sapphire, GaN, etc. ○ Resins → Various engineering plastics, polyimide, Teflon, etc. For more details, please contact us or download the catalog.

• Processing Contract

Achieving a flatness accuracy of 0.001mm or less (for φ12 inches).

Our company (TDC Corporation) specializes in ultra-precision mirror polishing of various materials and general precision machining. We respond to customer requests regarding material, size, machining accuracy, and other product specifications. Please feel free to contact us. For more information about our processing capabilities and achievements, please refer to our website (http://www.mirror-polish.com/).

• Processing Jig
• Semiconductor inspection/test equipment
• Wafer processing/polishing equipment

The glass pot lid has a hydrophilic heat-resistant coating, allowing you to check the cooking state without any fogging.

SPACECOOL Co., Ltd. is pleased to announce its support for the purpose of the newly established memorial day "Day to End the Too Hot Summer" by the Japan Climate Leaders Partnership (JCLP). In order to address the increasingly severe heat waves, we will continue to promote the expansion of our zero-energy cooling radiative cooling material "SPACECOOL." JCLP has registered August 8, 2025, and every August 8 thereafter, as "Day to End the Too Hot Summer" with the Japan Anniversary Association. — What is the new memorial day "Day to End the Too Hot Summer"? In recent times, many regions in Japan have been experiencing consecutive days of extreme heat, and the impacts of climate change are manifesting in serious ways in our lives. Nevertheless, reports and discussions linking this to "climate change" are limited, and there is currently a lack of momentum for climate change measures. In response to this issue, JCLP has decided to establish the "Day to End the Too Hot Summer" during this hottest time of the year, creating a social impetus to reframe "heat" as a climate change issue. This memorial day aims to share the commitment to halt the climate crisis for future generations and serve as a starting point for advancing the systemic transformation of society as a whole.

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

The following cameras are supported in the Elua 7.6 series. Product introduction: https://aileunsys.co.jp/b01_aileun.html Compatible camera list: https://aileunsys.co.jp/aileun/compatible_camera.html Newly added: - Manufacturer: DAHUA Model number (1 model): DH-IPC-HFW2449TLN-S-PRO

Dear Valued Customers, Thank you very much for your continued support. We would like to inform you that our company will be closed for summer vacation from Wednesday, August 13, 2025, to Friday, August 15, 2025. We will resume normal operations on Monday, August 18. We appreciate your understanding and cooperation.