Notice of Participation in Interfex Osaka

Super compact! Mobile mixing and transfer equipment! You can manage the mixer and pump together.

- A combination of stainless steel containers, mixers, and transfer pumps. - After mixing the raw materials, they can be directly moved to the next process, allowing the mixed solution to be transferred. - The operation of the mixer and pump can be collectively controlled from the control panel. - The container and cart are made of durable and rust-resistant SUS304 material. - We will select, design, and manufacture according to the usage environment and the contents.

• Other pumps

High power for reduced heating time! Stainless container with a heater that warms up in a short time.

1. Compact Equipment The heater unit is directly attached to the container, making the equipment compact and space-saving. Since all the devices are mounted on the container, moving it is easy. 2. No Initial Cost Chillers with both heating and cooling functions are expensive and have a higher initial cost compared to heaters. If only heating of the jacket is required, heaters are overwhelmingly less costly in terms of initial investment. 3. Can Quickly Heat the Jacket By adopting a 7.5 kW heater, the water in the jacket section can be heated to high temperatures in a short time, warming the contents. Product Features - The heater is installed in the jacket section, allowing you to heat liquids with just this unit. - It has a dry-run prevention function, so the heater stops when the water in the jacket is low. - It comes with a level gauge to check the water level in the jacket. - The temperature of the mixed liquid can be adjusted through the linkage between the thermometer and the heater. - A stirrer can be attached to the container, allowing for uniform heating of the contents. As this is a made-to-order product, modifications to "dimensions" and "materials," as well as custom processing to suit specific applications, can be accommodated.

• tank

This is a stainless steel container with an easy-to-clean reverse function. A mixer can also be attached.

○ We have added a reverse function to easily clean heavy containers. ○ You can tilt the container to any angle just by turning the handle. ○ No need for a stand! It comes with a mounting seat for the mixer with a lifting function. ○ The container is made of SUS304, which is resistant to rust.

• tank

This is a stainless steel container with a bracket that can be mounted on a frame or device. It is a hopper type that excels in discharging liquids and other materials.

○ The container can be attached and detached according to the work requirements. ○ The container comes with a bracket (mounting support), allowing it to be integrated into part of the device. ○ The bracket has two holes for securing it with screws or similar fasteners. ○ HT-ST-BRK is a cover type, HT-CTH-BRK is a clip-sealed type, and HT-CTL-BRK is a band-sealed type. ○ Containers of 200L or more come with lifting hardware (holes). ○ Containers and brackets can be custom-made.

• Stainless steel container

Stainless hopper ideal for filling machines, custom-made to fit your equipment.

【Features】 - This is a hopper designed for material feeding. - The hopper has a sharp angle of 60 degrees, allowing for smooth feeding. - It can be easily installed if your current equipment or tank lid has a helix pipe. 【Specifications can be modified】 - Specifications can be changed to suit your equipment. - The size of the helix at the discharge outlet can be changed. - The type of discharge outlet can also be modified; it can be changed to a flange or nipple. Please consult us.

• Food Processing Equipment

Eccentric-shaped stainless steel hopper! We will manufacture it to fit your equipment.

【Features】 ○ This is a hopper designed for material feeding purposes. ○ It has an eccentric shape that excels in discharging liquids and powders. ○ Compared to standard hoppers, it allows for adjustments to avoid interference with surrounding components. ○ It can be easily installed if your current equipment or tank lid has a hygienic piping connection. 【Specifications can be modified】 ・Specifications can be changed to suit your equipment. ・The hygienic connection size at the discharge outlet can be modified. ・Changes to the type of discharge outlet are also possible. It can be changed to a flange or nipple. Please consult us.

• Food Processing Equipment

The container and the stand can be separated. A stainless steel tank with a bottom slope type for smooth liquid discharge!

○ The container and stand can be separated and fixed according to the work requirements. ○ The container and stand can be attached with butterfly screws, requiring no tools. ○ The container can be removed from the stand for cleaning, which reduces cleaning time. ○ The container and stand are made of durable and rust-resistant SUS304 material. ○ KTT-ST-ASC is a cover lid type, KTT-CTH-ASC is a clip-sealed type, and KTT-CTL-ASC is a band-sealed type. ○ Containers over 300L are equipped with fittings (holes) for lifting.

• Stainless steel container

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.