We will be exhibiting at the "2018 International Welding Show"!

Achieving a very stable welding process! Intelligent digital welding machine.

The "TPS/i+CMT" is a digital welding machine that achieves a very stable welding process with low spatter and low heat input. By utilizing precise waveform control performance and special wire feeding control, the molten pool is forcibly cooled. By repeating this control, both an increase in welding speed and an improvement in welding quality are achieved simultaneously. Additionally, by adding the CMT package to the TPS/i, the CMT welding process becomes possible, with the wire acceleration performance improved to twice that of conventional CMT and the welding speed increased by 1.3 times. Not only does it enable more stable welding with lower heat input, but it also introduces a new process that leverages the enhanced acceleration performance. 【Features】 ■ New CMT integrated into the digital welding machine TPS/i ■ Achieves a very stable welding process with low spatter and low heat input ■ Controls wire feeding speed and welding current waveform to correct arc length and arc dynamics ■ Wire acceleration performance improved to twice that of conventional CMT, welding speed increased by 1.3 times *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine
• controller
• others

Achieve high-quality high-speed welding with two welding programs! Free selection of programs is possible!

The "TPS/i" is a digital welding machine that achieves high-quality high-speed welding equipped with the "Low Spatter Control Program (LSC)" and the "Pulse Multi Control Program (PMC)." The CPU installed inside the welding machine analyzes the behavior of the arc at a speed 200 times faster than conventional machines and automatically controls it. It provides high-speed feedback, significantly enhancing welding performance. Additionally, it allows for the selection and purchase of only the necessary components, reducing initial costs. It features a 7-inch touch operation panel that can be operated even with welding gloves. 【Features】 ■ Welding programs can be selected and purchased as needed ■ Reduces initial costs ■ Customizable according to application ■ Equipped with a 7-inch touch operation panel ■ Touch operation is possible even with welding gloves *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine
• others

A highly reliable system that can connect with all robots!

The "TPS/i Robot Welding System" is a reliable system that can be connected to any robot, offering future scalability and upgradeability. Equipped with the "Low Spatter Control Program (LSC)" and the "Pulse Multi Control Program (PMC)," it achieves high-quality welding. Additionally, the system configuration with robot connection is available in both "air-cooled push type" and "water-cooled push-pull type." 【Features】 ■ Compatible with any robot ■ Welding programs can be selected and purchased as needed, reducing initial costs ■ Customizable according to application ■ Equipped with a 7-inch touch operation panel, operable even with welding gloves *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine
• Welding robot
• others

A practical low-spatter, low-heat-input stable welding process! Suitable for any application!

The "Fronius CMT Welding Machine" features precise waveform control capabilities, utilizing a process that maintains high-quality joints and achieves stable arc welding across all metals. Unlike conventional MIG/MAG welding, it employs a special wire feed control that forcibly cools the molten pool. By repeatedly applying this control, both welding speed and quality improvements are realized simultaneously. As a result, it minimizes spatter to the extreme, enabling a variety of joints such as MIG brazing, dissimilar material joining of carbon steel and aluminum, and welding of thin sheets as thin as 0.3 mm. 【Features】 ■ Combined control of wire feed and waveform ■ Significant reduction in heat input through cooling of the welding pool ■ Extreme reduction of spatter ■ Extremely stable arc regardless of the workpiece surface shape *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine
• others

The full digital resonant inverter method enables highly stable arcs!

The "Transport Pocket 150/180" is a compact and tough portable welding machine that can withstand use in harsh environments. Thanks to its full digital resonant inverter system, control response has been improved, allowing for enhanced arc stability, better point arcs, and reduced spatter. It features a Power Factor Correction (PFC) function that improves compatibility with generators while minimizing power loss, even with longer input cables, as well as a Time Shut Down (TSD) function. 【Features】 ■ Achieves high energy efficiency ■ Significantly expands the welding work radius with Power Factor Correction (PFC) ■ Reduces power consumption with Time Shut Down (TSD) ■ Excellent welding characteristics ■ Performs well in tough environments ■ Outstanding operability and future expandability *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine
• others

Lithium-ion battery equipped portable welding machine "AccuPocket" that can be carried on the shoulder.

▶ Equipped with a newly developed lithium-ion battery High output of 400Wh. Can be charged up to 90% in just 30 minutes. Highly reliable lithium-ion battery. Can weld 17 pieces of 2.6mm coated arc welding rods or 7 pieces of 3.2mm with a full charge. Rated output of 140A for coated arc welding and 150A for TIG welding. ▶ Exceptionally fast arc start, welding while charging in hybrid mode is also possible ▶ Lightweight (11kg) and compact. Easy to carry over the shoulder.

• Welding Machine
• Other work tools

This complete system supports a wide range of applications! It maintains a high level of reproducibility!

The "Flextrack 45 PRO" is a compact, self-propelled welding carriage designed for a wide range of applications. It perfectly meets all demands in industries that handle various welding tasks (such as shipbuilding and tank manufacturing). Additionally, there are three types of guide rails available, which fit perfectly into any setup, allowing for quick and easy installation and removal. 【Features】 ■ Guide rails and welding carriage that can be set up quickly and easily ■ Designed to withstand tough environments for indoor and outdoor work ■ Consistent welding speed at all times ■ High-quality components ■ Rigid aluminum housing ■ Collaboration with Fronius advanced joining technology for optimal welding results *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine
• others

Both the power supply and welding head can be controlled! Compact and lightweight design, perfect for portable work!

The "FPA 3020 AC/DC" is a circumferential welding system controller designed for FCH and FOH welding heads. Due to its compact and lightweight design, it is suitable for portability. It controls both the power supply and the welding head, ensuring high welding quality with 100% reproducibility. 【Features】 ■ Built-in water-cooled device with flow control ■ Built-in microprocessor controller ■ High-sensitivity touch screen operation panel (color) ■ Language selection available (German, English, French, Russian, etc.) ■ Remote control FRC-FPA 3020 with 10m cable *For more details, please refer to the PDF materials or feel free to contact us.

• Welding Machine
• controller
• others

We propose a new generation of equipment systems with design and manufacturing technology for labor-saving and automation accumulated over many years!

In 1974, the engineering division became independent as Aiko Engineering Co., Ltd., but in 2017, it integrated with Aichi Industries to respond to customer needs for system design and engineering services, leading to the establishment of the Engineering Headquarters. The Engineering Headquarters incorporates technologies and products introduced by Aichi Industries from overseas, and possesses unmatched technology in automated systems and specially designed plant equipment compared to other companies. We conduct design development and manufacturing from automation of industrial machinery and equipment to plant systems. We respond to customer needs throughout the entire lifetime of system equipment, including design, manufacturing, construction, maintenance, inspection, repair, and preservation. 【Business Activities】 ■ Import and domestic sales of industrial machinery and materials, as well as technical services ■ Automation of automatic welding machines, special welding equipment, and industrial facilities ■ Design, development, manufacturing, and sales of plant systems *For more details, please refer to the PDF materials or feel free to contact us.

• Mechanical Design
• Contract manufacturing
• others

Safe and efficient grinding operations! Free yourself from the tough, dirty, and dangerous aspects of grinder work!

The "AK Grinder" is a grinding device equipped with an automatic tracing function that automatically grinds while constantly controlling the pressing pressure of the grinder to a fixed level. The pressing pressure can be set arbitrarily, making it suitable for a wide range of tasks from heavy cutting to light cutting such as paint removal. Additionally, even in the presence of welding distortions, it automatically follows the grinding area, resulting in a uniform finish. Since its development 30 years ago, it has been delivered in large quantities and has received high praise. 【Features】 ■ Automatic operation with simple controls ■ Automatically and accurately follows even with uneven deformations ■ Automatically stops when the load increases to prevent damage to the grinding wheel and grinder burn ■ High-frequency control system allows for the use of φ180 mm and φ100 mm grinding wheels ■ Capable of high-speed grinding at 45 to 60 grams per minute even for grinding welding beads of steel and stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• Grinding Machine
• others

High-speed operation of robots is possible! A magnetic gripper equipped with powerful holding force and safety.

The "Magnet Gripper for Industrial Robots" is adopted by leading automobile manufacturers and integrators worldwide for applications in the white body of automobile manufacturing and hoist transportation. By using compressed air to switch the magnetic force on and off, it significantly reduces air consumption compared to vacuum grippers. Due to its high magnetic flux density, it exhibits strong holding power even on air gaps and rounded surfaces such as rust and painted areas. 【Features】 ■ Enables high-speed operation of robots with powerful gripping ■ Minimizes robot paths ■ Lightweight and compact, allowing for reduced weight and increased efficiency of EOAT ■ Capable of gripping from one side only, making fixture design easier compared to mechanical grippers ■ The use of permanent magnets eliminates the risk of workpiece drop even when the power supply is cut off *For more details, please refer to the PDF document or feel free to contact us.

• Transport and handling robots
• Other conveying machines

Achieving high-speed and high-quality welding! A wide range of products listed in fields such as aerospace and railway vehicle manufacturing!

This catalog features resistance welding systems manufactured by Arrow, which achieve high-speed and high-quality welding. It includes the "3G Gun for Robots," which offers high investment efficiency, reduced operational costs, global compatibility, and high flexibility, as well as the lightweight and compact manual gun "Ergoline Ergoflex," known for its excellent operability. [Contents (partial)] ■ 3G Gun for Robots ■ Manual Gun ■ MFDC Transformer and Control Unit ■ iBox ■ Portable Spot Welder *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine
• others

Custom design tailored to user needs, high quality and efficiency with welding head design!

The "Orbima TIG 500II" is a high-quality, high-efficiency automatic TIG welding system. We offer custom designs tailored to the user's applications, recommend suitable heads, and provide total solutions from development and design to delivery and technical service. Equipped with a rated 500A inverter transformer, it ensures secondary side output precision and low heat input, low distortion welding joints. Additionally, the programmable controller manages welding conditions and designs and manufactures welding heads according to specific applications. 【Features】 ■ Orbima TIG 500II Welding Power Supply - Guarantees secondary side output precision, low heat input, and low distortion welding joints - Powerful design with a rated 500A (100% duty cycle) - Stable arc start even when extended up to 70m ■ Programmable Controller - Easy management of welding conditions with an LCD touch panel - Robust and dustproof design suitable for on-site welding ■ Welding head design tailored to user needs *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine
• others

High investment efficiency! A wide range of multifunctional split-frame type cutting and processing machines listed!

This catalog features pipe cutting and beveling machines manufactured by Wax, which have a robust technological foundation and advanced manufacturing techniques. We offer a lineup that includes the multifunctional pipe cutting and beveling machine "MDSF Dyna Prep," which is easy to install on-site with its split frame, as well as small-diameter split frame cutting and beveling machines such as the "SDSF series" and "LCSF series." [Contents (partial)] ■ Small-diameter split frame cutting and beveling machines ■ Low clearance split frame cutting and beveling machines ■ Multifunctional split frame cutting and beveling machines ■ Guillotine-type pipe cutting machines ■ Portable pipe cutting machines *For more details, please refer to the PDF materials or feel free to contact us.

• Welding Machine
• Other processing machines

Increased shaping efficiency to 180%, compatible with a wide range of materials! SLM Solutions' 3D metal additive manufacturing system.

The "3D Metal Additive Manufacturing System" is a patented bidirectional powder coating method that achieves high precision, high density, and high speed, realizing one of the highest manufacturing efficiencies in its class with a powder head fusion method metal 3D printer. Furthermore, the types of metal powders and the set manufacturing parameters can be freely selected and adjusted by the user, making it user-friendly. Designed with a patented safety filter system and a special shield for the manufacturing section, it also reduces the amount of inert gas used by 30% compared to conventional methods, considering both operational safety and cost reduction. 【Features】 ■ High productivity: Multi-laser technology that enables precise and high-speed manufacturing ■ High operability: Equipped with a wide range of standard manufacturing parameters ■ Capable of manufacturing a wide variety of materials: Supports manufacturing of materials such as titanium and aluminum alloys *For more details, please refer to the PDF document or feel free to contact us.

• 3D Printer
• others

High-quality metal 3D printer (additive manufacturing) dedicated metal powder.

LPW is a powder manufacturer that began developing and producing specialized powders early in the history of additive manufacturing (AM) technology. To produce a cube measuring 25mm x 25mm x 25mm, a welding length of 8000m is required; however, achieving defect-free welding over such a distance at the micron level necessitates not only the precision of the machinery but also the precision of the materials. LPW's specialized powders for additive manufacturing sufficiently meet these requirements. 【Features】 - Specialized powders developed specifically for additive manufacturing - High-quality spherical shape - First powder company to obtain aerospace-related certification - Affordable atomization For more details, please contact us or download the catalog.

• Other metal materials

Accurately control the thickness of the meat and the width of the bead! Capable of handling complex shapes through robot control.

"LMD (Laser Metal Deposition)" is a construction method that irradiates a laser onto a workpiece and injects metal powder from a commercial area to melt the powder and build up material. With Trumpf's well-controlled laser process and a unique control mechanism in the powder supply device, it has excellent features such as "reducing the dilution rate of the base material," "reducing thermal distortion and heat-affected zones," and "accurately controlling the thickness of the buildup." 【Features】 ■ Reduces the dilution rate of the base material ■ Reduces thermal distortion and heat-affected zones ■ Accurately controls the thickness of the buildup ■ Enables buildup with metallurgically superior properties by accurately controlling the mixing ratio of powder materials ■ Adapts to complex shapes through robot control *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

High-output electron beams and welding wires enable fast layered manufacturing of large components!

The "EBAM Series" is a large-scale metal additive manufacturing system that achieves high-efficiency metal melting with a high-output electron beam of up to 42 kilowatts. The materials used are welding wire and substrate plates. Due to its large chamber, it is capable of constructing large parts and enables high deposition rates for rapid layering. With a flexible manufacturing process, design changes can be made even just before construction. It is also suitable for processing highly reactive metals as it operates in a high vacuum environment. 【Features】 ■ Achieves high-efficiency metal melting ■ Capable of constructing large parts ■ Enables high deposition rates for rapid layering ■ Design changes can be made just before construction ■ Recommended for processing highly reactive metals ■ The chamber reaches a high vacuum state in 12 to 25 minutes *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 27th INTERPHEX Week Tokyo https://www.interphex.jp/tokyo/ja-jp.html 【 Dates 】 July 9 (Wednesday) - 11 (Friday), 2025 10:00 AM - 5:00 PM 【 Venue 】 Tokyo Big Sight (3-11-1 Ariake, Koto-ku, Tokyo 135-0063)

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely invite you to visit us during this busy time. 【 Exhibition Name 】 Automotive Technology Exhibition 2025 YOKOHAMA https://aee.expo-info.jsae.or.jp/ja/yokohama/ (An "online exhibition" will also be held during and around the event period) 【 Dates 】 May 21 (Wednesday) - 23 (Friday), 2024 10:00 AM - 6:00 PM *On the final day, 9:00 AM - 4:00 PM (Online exhibition: May 14 (Wednesday) - June 4 (Wednesday)) 【 Venue 】 Pacifico Yokohama (1-1-1 Minatomirai, Nishi-ku, Yokohama, Kanagawa Prefecture) Our booth number: "Concourse 505"

Nitto Kohki will hold the "2025 Attack Fair in Meiko" for two days from July 23 (Wednesday) to July 24 (Thursday), 2025, at the "Kowa Seminar Plaza 2F Training Room NO.12 (inside Kowa Sports Land)." The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for attendees and many fun activities planned. We look forward to welcoming everyone!

On February 13 (Friday), we will be exhibiting a corporate panel at the Interphex Conference in Toyama. We sincerely look forward to your visit. Event Name: Interphex Conference Toyama 2026 Date: February 13, 2026 (Friday) Venue: Toyama International Conference Center Panel Content: New Proposals for Tablet Pressing Issues (TL Business: PVD Coating Processing)

[Lecturer] Koichi Iwama, Professor, Faculty of Economics and Management, Wako University / Chairman, Resource Economics Committee, Petroleum Technology Association [Key Lecture Content] The latest trends surrounding hydrogen and ammonia, including household fuel cells, fuel cell vehicles, fuel cell trucks, fuel cell buses, hydrogen stations, hydrogen power generation, hydrogen engines, hydrogen-reduced steelmaking, and ammonia ships. The lecture will clearly explain the optimal business strategies for Japanese companies towards a hydrogen and ammonia society by 2030, in the context of the headwinds from the Trump administration and the fierce competition from Western countries and China.