We will be exhibiting at the 31st Interphex Japan.

Recommended for liquid stirring and discharge! A stirring unit that combines a stirrer and a valve with a stainless steel container.

○ The container has a bottom plate that is inclined in the discharge direction, allowing for complete liquid discharge without residue. ○ It is equipped with a centrifugal stirrer that can mix low to medium-high viscosity liquids, without any blades. ○ The stirrer can be selected between air motor type and electric motor type. ○ The valve is a straight type with low flow resistance and features a diaphragm design that is excellent in chemical resistance. ○ The stirrer and valve can be easily disassembled and cleaned with a Heller connection.

• Stainless steel container

Super compact! Mobile mixing and transfer equipment! You can manage the mixer and pump together.

- A combination of stainless steel containers, mixers, and transfer pumps. - After mixing the raw materials, they can be directly moved to the next process, allowing the mixed solution to be transferred. - The operation of the mixer and pump can be collectively controlled from the control panel. - The container and cart are made of durable and rust-resistant SUS304 material. - We will select, design, and manufacture according to the usage environment and the contents.

• Other pumps

High power for reduced heating time! Stainless container with a heater that warms up in a short time.

1. Compact Equipment The heater unit is directly attached to the container, making the equipment compact and space-saving. Since all the devices are mounted on the container, moving it is easy. 2. No Initial Cost Chillers with both heating and cooling functions are expensive and have a higher initial cost compared to heaters. If only heating of the jacket is required, heaters are overwhelmingly less costly in terms of initial investment. 3. Can Quickly Heat the Jacket By adopting a 7.5 kW heater, the water in the jacket section can be heated to high temperatures in a short time, warming the contents. Product Features - The heater is installed in the jacket section, allowing you to heat liquids with just this unit. - It has a dry-run prevention function, so the heater stops when the water in the jacket is low. - It comes with a level gauge to check the water level in the jacket. - The temperature of the mixed liquid can be adjusted through the linkage between the thermometer and the heater. - A stirrer can be attached to the container, allowing for uniform heating of the contents. As this is a made-to-order product, modifications to "dimensions" and "materials," as well as custom processing to suit specific applications, can be accommodated.

• tank

This is a stainless steel container with an easy-to-clean reverse function. A mixer can also be attached.

○ We have added a reverse function to easily clean heavy containers. ○ You can tilt the container to any angle just by turning the handle. ○ No need for a stand! It comes with a mounting seat for the mixer with a lifting function. ○ The container is made of SUS304, which is resistant to rust.

• tank

This is a stainless steel container with a bracket that can be mounted on a frame or device. It is a hopper type that excels in discharging liquids and other materials.

○ The container can be attached and detached according to the work requirements. ○ The container comes with a bracket (mounting support), allowing it to be integrated into part of the device. ○ The bracket has two holes for securing it with screws or similar fasteners. ○ HT-ST-BRK is a cover type, HT-CTH-BRK is a clip-sealed type, and HT-CTL-BRK is a band-sealed type. ○ Containers of 200L or more come with lifting hardware (holes). ○ Containers and brackets can be custom-made.

• Stainless steel container

Stainless hopper ideal for filling machines, custom-made to fit your equipment.

【Features】 - This is a hopper designed for material feeding. - The hopper has a sharp angle of 60 degrees, allowing for smooth feeding. - It can be easily installed if your current equipment or tank lid has a helix pipe. 【Specifications can be modified】 - Specifications can be changed to suit your equipment. - The size of the helix at the discharge outlet can be changed. - The type of discharge outlet can also be modified; it can be changed to a flange or nipple. Please consult us.

• Food Processing Equipment

Eccentric-shaped stainless steel hopper! We will manufacture it to fit your equipment.

【Features】 ○ This is a hopper designed for material feeding purposes. ○ It has an eccentric shape that excels in discharging liquids and powders. ○ Compared to standard hoppers, it allows for adjustments to avoid interference with surrounding components. ○ It can be easily installed if your current equipment or tank lid has a hygienic piping connection. 【Specifications can be modified】 ・Specifications can be changed to suit your equipment. ・The hygienic connection size at the discharge outlet can be modified. ・Changes to the type of discharge outlet are also possible. It can be changed to a flange or nipple. Please consult us.

• Food Processing Equipment

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 31st Measurement and Measurement Exhibition INTERMEASURE 2024 Official Website: https://intermeasure.org/itms2024/ 【 Dates 】 From __ (Wednesday) to __ (Friday), 202_ 【 Venue 】 Tokyo Big Sight (Tokyo International Conference Center) East Hall (Booth Number: ___) 【 Exhibited Products 】 - Air Leak Tester - Hydrogen Leak Detector - Pin Hole (Reference Test Piece) and more. For more details, please refer to the "Related Materials" (PDF file) below.

Nitto Kohki will exhibit at the "H₂ & FC EXPO Spring International Hydrogen and Fuel Cell Exhibition" held at Tokyo Big Sight, West Exhibition Hall 2, from February 28 (Wednesday) to March 1 (Friday), 2024. [Booth Number: W14-63] The quick fluid coupling "Coupler" is a product that allows for the rapid connection and disconnection of piping for various fluids such as air, water, oil, and chemical solutions. At this exhibition, we will primarily showcase the high-pressure hydrogen filling quick fluid coupling "HHV Coupler."

☆☆☆ Urgent Visit to Japan & Emergency Event Announcement ☆☆☆ Dr. Yuval Levy, CEO of ISCFDC and developer of EPPIC, who has been involved in CFD research at NASA Ames Research Center for about five years, is coming to Japan! He will demonstrate and explain advanced CFD technologies, application cases, and the latest features of EPPIC himself. □ Date and Time □ July 31, 2026 (Friday) 13:00-18:00 (Registration starts at 12:30) <Part 1: Post-Processor Session> 13:00-16:40 <Part 2: Pre-Processor Session> 16:50-17:50 <Networking Event> 18:10-19:40 □ For more details □ Visit the Hulinks page https://www.hulinks.co.jp/seminar/eppic/

[Viewer Benefits Available] Explaining Tips for LC in a Short Seminar Do you have concerns such as "I'm unsure about column selection," "I'm struggling to optimize analysis conditions," or "I have challenges analyzing compounds with weak retention" in LC analysis? Waters will hold a seminar titled "Must-Listen! Advanced LC Application Seminar" where you can learn practical LC analysis know-how in just 30 minutes. In this seminar, we will cover useful topics in a total of six sessions, including tips for choosing detectors, how to utilize reverse phase columns, scaling up to preparative LC, approaches for analyzing hydrophilic and highly polar compounds, case studies of low-adsorption HPLC, and improving purity through solid-phase extraction. Each session is scheduled to start at 15:00. Event Themes: • October 6 (Tuesday) - Session 1: Tips for Choosing Detectors • October 13 (Tuesday) - Session 2: Tips for Choosing Columns • October 21 (Wednesday) - Session 3: Tips for Preparative LC • October 27 (Tuesday) - Session 4: Approaches for Analyzing Hydrophilic and Highly Polar Compounds • November 5 (Tuesday) - Session 5: Case Studies of Low-Adsorption HPLC • November 10 (Tuesday) - Session 6: Tips for Solid-Phase Extraction

In liquid biopsy research, we will introduce a technical evaluation of proteome analysis to obtain reliable data from trace plasma, as well as case studies on data quality verification using the Contamination Index and Simple Western.