We exhibited at the 31st Interphex Japan!

Japanese Pharmacopoeia Standard: 'Release Testing Methods for Formulations Applied to the Skin'

The "Paddle Over Disk Method" and "Cylinder Method" are testing methods already included in the USP, and Agilent Technologies has a wealth of delivery experience with them. Additionally, we offer accessories such as the "Enhancer Cell" for ointments and creams. Even when using these accessories, Agilent's dissolution testers allow for easy height adjustment (25mm). *Refer to the Japanese Pharmacopoeia and USP 1724.

• Other physical property measurements and component analysis
• Dissolution Tester
• Other quality control systems

JP17 Bureau Reference Information: Mechanical Calibration Correspondence for Dissolution Test Apparatus

The 280-DS MQS measures the parameters of mechanical calibration of dissolution testers with high precision. Measurement is done hands-free thanks to sensor technology, taking only about 30 minutes per unit. It complies with 21 CFR Part 11. ★ Mechanical calibration has been included as reference information in the 17th edition revision. "To aim for reduced variability in test results through mechanical calibration, it is recommended to apply this reference information." (From the 17th Japanese Pharmacopoeia revision "Standard Methods for Mechanical Calibration of Dissolution Testers")

• Dissolution Tester

It automatically performs sample suction, filtration, and collection from the dissolution tester.

■Efficiency Automation enables easy and quick sampling. It eliminates the labor involved in dissolution testing and prevents variations in sampling volume and position that would be difficult to manage manually. All functions, including the pump, filter (optional), and sampler, are integrated into a device just 39 cm wide. One filter plate used for sample filtration contains the equivalent of eight 0.45 μm filters. ■Flexibility In addition to the standard pump function, you can select filter functions according to your needs. Sampling can accommodate test tubes, HPLC vials, and well plates. ■Accuracy The rotary piston syringe pump ensures precise sampling of the specified amount at designated sampling points. Uniformity The color touch panel of the 850-DS allows for input of the dissolution test program. ■Test Results Test data can be printed using the built-in printer.

• Dissolution Tester

Sustained-release formulation testing apparatus USP Apparatus 3

BIO-DIS is a dissolution tester for conducting release rate tests, compliant with USP Apparatus 3 and EP Reciprocating Cylinder tests. It is an ideal dissolution tester for formulations that require sustained release formulations and dissolution profiles at multiple pH levels.

• Dissolution Tester

Corresponds to the Japanese Pharmacopoeia, USP, and EP3. The design minimizes mechanical variation factors of the device using vessels that reduce the deviation of the container's centering.

The dissolution tester 708-DS features one-touch centering with the TruAlign vessel, and its design minimizes the risk of misalignment after installation, reducing the risk of failure during mechanical calibration. It supports Japanese language, has a two-piece paddle, and significantly improves basic operability with an expanded space between the drive unit and the vessel plate. It accommodates a wide range of dosage forms for dissolution testing, including tablets, capsules, rotating cylinders, and the paddle-over-disk method.

• Dissolution Tester

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

[To the owners of parking lots and parking lot construction companies] "I’m worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask that customers arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.