We will be exhibiting at the Food Factory 2018 trade show.

High power for reduced heating time! Stainless container with a heater that can warm up in a short time.

1. Compact Equipment The heater unit is directly attached to the container, making the equipment compact and space-efficient. Since all the devices are mounted on the container, moving it is easy. 2. No Initial Cost Chillers with both heating and cooling functions are expensive and have a higher initial cost compared to heaters. If only heating of the jacket is needed, heaters are overwhelmingly more cost-effective in terms of initial investment. 3. Can Quickly Heat the Jacket By adopting a 7.5kW heater, the water in the jacket can be heated to high temperatures in a short time, warming the contents. Product Features - The heater is installed in the jacket section, allowing for liquid heating with just this unit. - It has a dry-run prevention feature, so the heater stops when the water in the jacket is low. - Equipped with a level gauge to check the water level in the jacket. - The temperature of the mixed liquid can be adjusted through the linkage between the thermometer and the heater. - A stirrer can be attached to the container, allowing for uniform heating of the contents. As this is a made-to-order product, modifications to "dimensions" and "materials" can be made, as well as custom processing to suit specific applications.

• tank

Super compact! Portable mixing and transfer equipment! You can manage the mixer and pump together.

- A combination of stainless steel containers, mixers, and transfer pumps. - After mixing the raw materials, they can be moved directly to the next process, allowing the mixed solution to be transferred. - The operation of the mixer and pump can be collectively controlled from the control panel. - The container and cart are made of durable and rust-resistant SUS304 material. - We will select, design, and manufacture according to the usage environment and the contents.

• Other pumps

This is an original air motor mixer from Nitto Metal Industry. It is ideal for preventing foaming during mixing and for stirring high-viscosity liquids.

- It can stir in a sealed state with a Heller connection. Pressure reduction is also possible. - It can stir liquids with low to medium-high viscosity. - It comes standard with a waste receiver to prevent contamination from wear particles generated at the shaft seal. - The stirring body is a Bernoulli flow stirring body type BEAG E, which is less likely to incorporate air. (Patent No. 6169207) - It can be used in explosion-proof areas. - Made entirely of stainless steel, it is resistant to rust and hygienic. - It can be used without lubrication, so there is no oil splatter. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntma-s/

• Mixer/agitator

This is an original electric motor stirrer from Nitto Metal Industry. It is ideal for preventing foaming during stirring and for stirring high-viscosity liquids.

- It features an easy-to-remove and attach connection. - It can stir in a sealed state and is usable under both pressurized and vacuum conditions. - It can stir liquids with low to medium-high viscosity. - It comes standard with a debris collector to prevent contamination from wear particles generated at the shaft seal. - The stirring element is a Bernoulli flow stirring element type BEAG E, which is designed to minimize air entrapment. (Patent No. 6169207) - It is equipped with a standard controller that allows for speed adjustment. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntme-a/

• Other energy equipment

No tools needed! Pressure vessel for liquid transfer with swing bolt specifications!

This is a stainless steel open-type pressure vessel with a flange connection. The lid can be opened and closed without tools using a swing bolt, and there is no risk of losing the removed bolts. Being an open type, it is easy to clean and hygienic. The lineup includes: - Standard type flange open pressure vessel 【PCN-O】 - Type with caster legs for bottom discharge, allowing for complete discharge of contents 【PCN-O-L】 - Jacketed type for insulation and cooling 【PCN-O-J】 - Jacketed type with legs that combines 【PCN-O-L】 and 【PCN-O-J】 【PCN-O-J-L】. In addition, Nitto Kinzoku Kogyo Co., Ltd. offers stainless steel vessels that can be customized according to applications and peripheral equipment, and accessories for pressure vessels can be selected, allowing for completely made-to-order production!

• Stainless steel container

Zaltrius Japan will be exhibiting at the 98th Annual Meeting of the Japanese Society for Tissue Culture. ◼ Date: August 27 (Thursday) - 28 (Friday), 2026 ◼ Location: 2-8-35 Tai-machi, Nagaoka City, Niigata Prefecture, Hotel New Otani Nagaoka, Venue for the 98th Annual Meeting of the Japanese Society for Tissue Culture ◼ Booth: No. 11 ◼ Exhibited Products: Polyplus High-Efficiency Transfection Reagents NexaGel 3D Cell Culture Matrix Research Growth Factors and Cytokines Basic Cell Culture Media and Reagents Picus 2 Electronic Pipette We have a selection of products recommended for those considering improving research reproducibility and establishing 3D culture environments. Please come and see the actual products and applications at the venue. We look forward to your visit!

We are pleased to announce a co-hosted seminar with Live Consulting Co., Ltd. "Practical Seminar on Microsoft Copilot for Executives and Managers in the Manufacturing Industry" "The new AI tools are no longer needed." This seminar will allow you to experience Microsoft Copilot, which can be used directly within your usual Word, Excel, and Teams, through a demonstration of the actual operation screen. The answers are already within your existing Microsoft 365. You can use AI directly in Word, Excel, and Teams without the need for additional tool selection or new investments, all within the security framework of M365. We will explain the basics to practical applications of Copilot in 90 minutes, specifically for executives and managers in the manufacturing industry. We sincerely look forward to your participation. [Recommended for the following individuals] - Executives and managers in the manufacturing industry who have not yet mastered generative AI/Copilot - Those considering AI implementation but are stalled due to tool selection, security, or promotion systems - Individuals who prefer to see the "actual screen" rather than just "reading" about it - Those who are unable to use ChatGPT in their company due to security concerns.

We will hold a webinar focused on analytical challenges in the research, development, and quality control of biopharmaceuticals, particularly antibody-drug conjugates (ADCs). We are pleased to invite Professor Yuji Ito from Kagoshima University, who will give a lecture on the latest analytical strategies and practical insights in biopharmaceutical research, including ADCs. Target Audience: - Researchers, developers, and CMC personnel from pharmaceutical companies, CDMOs, and CROs - Those considering advanced analytical methods for ADCs and antibody drugs - Individuals facing challenges in improving separation performance, reproducibility, or analytical efficiency - Those considering the implementation of MAM and workflow development Lecture 1 [Special Lecture]: Next-Generation Drug Discovery Using DDS with Tissue-Translocating Antibodies - AccumBody Platform and Antibody Conjugate Technology - Professor Yuji Ito, Graduate School of Science and Engineering, Kagoshima University Lecture 2: Latest LC Column Technology to Solve Challenges in ADC and Antibody Analysis Lecture 3: MAM Practice - An Integrated Workflow from Research and Development to Quality Evaluation * This webinar is a restructured version of the content from the on-site seminar held in July 2026.

Fujikogyo Co., Ltd. will exhibit at the "5th Smart Factory EXPO Autumn" held at Makuhari Messe from September 9 (Wednesday) to September 11 (Friday), 2026. On the day, we will showcase the latest FA and robotics products that achieve automation, efficiency, and labor-saving in the field. [Main Exhibited Products] ◇ Collaborative Robot Palletizing System (Elite Robot Co.) A compact design that is mobile and integrated. It enables seamless loading and easy operation via a tablet. ◇ Autonomous Mobile Robot for Pallet Transport (FEXA Co.) A small and agile AMR. It supports fully automated transportation through shutter and elevator coordination and the use of load sensors. ◇ Automatic Sealing Machine for Packing Tape (EXTEND Co.) Compliant with decarbonization and environmental considerations. It can be used with only power, without the need for air, allowing for use without constraints of location or utilities. We will propose solutions that help solve your challenges. Please visit our booth (Hall 2 / A13-36). *Advance registration (free) is required for attendance.

The organization will hold a seminar titled "EMC Performance of In-Vehicle Devices as Considered by Automobile Manufacturers" on September 16, 2026 (Wednesday), featuring lecturers from Toyota Motor Corporation, Hino Motors, Ltd., and Daihatsu Motor Co., Ltd. In addition to presentations from the three companies, a leading expert on in-vehicle device EMC from our organization will introduce the latest topics. Furthermore, after the seminar, a technical exchange meeting will be held, allowing participants, lecturers, and our organization's technical staff to exchange information. In recent years, the acceleration of autonomous driving, connectivity, and electrification technologies has been aimed at achieving carbon neutrality and evolving mobility. Within this context, it is anticipated that the demands for EMC in electric vehicles (xEV) and fuel cell vehicles (FCV), particularly regarding the electrification of powertrains and EV components, will be stronger than ever. In this seminar, we will invite EMC experts from automobile manufacturers to explain the latest trends in standards regarding the "EMC performance required for in-vehicle devices" to suppliers. We encourage you to take advantage of this opportunity.