We will be exhibiting at the 2nd Adhesive and Joining EXPO!

Achieving a very stable welding process! Intelligent digital welding machine.

The "TPS/i+CMT" is a digital welding machine that achieves a very stable welding process with low spatter and low heat input. By utilizing precise waveform control performance and special wire feeding control, the molten pool is forcibly cooled. By repeating this control, both an increase in welding speed and an improvement in welding quality are achieved simultaneously. Additionally, by adding the CMT package to the TPS/i, the CMT welding process becomes possible, with the wire acceleration performance improved to twice that of conventional CMT and the welding speed increased by 1.3 times. Not only does it enable more stable welding with lower heat input, but it also introduces a new process that leverages the enhanced acceleration performance. 【Features】 ■ New CMT integrated into the digital welding machine TPS/i ■ Achieves a very stable welding process with low spatter and low heat input ■ Controls wire feeding speed and welding current waveform to correct arc length and arc dynamics ■ Wire acceleration performance improved to twice that of conventional CMT, welding speed increased by 1.3 times *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine
• controller
• others

The full digital resonant inverter method enables highly stable arcs!

The "Transport Pocket 150/180" is a compact and tough portable welding machine that can withstand use in harsh environments. Thanks to its full digital resonant inverter system, control response has been improved, allowing for enhanced arc stability, better point arcs, and reduced spatter. It features a Power Factor Correction (PFC) function that improves compatibility with generators while minimizing power loss, even with longer input cables, as well as a Time Shut Down (TSD) function. 【Features】 ■ Achieves high energy efficiency ■ Significantly expands the welding work radius with Power Factor Correction (PFC) ■ Reduces power consumption with Time Shut Down (TSD) ■ Excellent welding characteristics ■ Performs well in tough environments ■ Outstanding operability and future expandability *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine
• others

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 31st Measurement and Measurement Exhibition INTERMEASURE 2024 Official Website: https://intermeasure.org/itms2024/ 【 Dates 】 From __ (Wednesday) to __ (Friday), 202_ 【 Venue 】 Tokyo Big Sight (Tokyo International Conference Center) East Hall (Booth Number: ___) 【 Exhibited Products 】 - Air Leak Tester - Hydrogen Leak Detector - Pin Hole (Reference Test Piece) and more. For more details, please refer to the "Related Materials" (PDF file) below.

Nitto Kohki will exhibit at the "H₂ & FC EXPO Spring International Hydrogen and Fuel Cell Exhibition" held at Tokyo Big Sight, West Exhibition Hall 2, from February 28 (Wednesday) to March 1 (Friday), 2024. [Booth Number: W14-63] The quick fluid coupling "Coupler" is a product that allows for the rapid connection and disconnection of piping for various fluids such as air, water, oil, and chemical solutions. At this exhibition, we will primarily showcase the high-pressure hydrogen filling quick fluid coupling "HHV Coupler."

☆☆☆ Urgent Visit to Japan & Emergency Event Announcement ☆☆☆ Dr. Yuval Levy, CEO of ISCFDC and developer of EPPIC, who has been involved in CFD research at NASA Ames Research Center for about five years, is coming to Japan! He will demonstrate and explain advanced CFD technologies, application cases, and the latest features of EPPIC himself. □ Date and Time □ July 31, 2026 (Friday) 13:00-18:00 (Registration starts at 12:30) <Part 1: Post-Processor Session> 13:00-16:40 <Part 2: Pre-Processor Session> 16:50-17:50 <Networking Event> 18:10-19:40 □ For more details □ Visit the Hulinks page https://www.hulinks.co.jp/seminar/eppic/

[Viewer Benefits Available] Explaining Tips for LC in a Short Seminar Do you have concerns such as "I'm unsure about column selection," "I'm struggling to optimize analysis conditions," or "I have challenges analyzing compounds with weak retention" in LC analysis? Waters will hold a seminar titled "Must-Listen! Advanced LC Application Seminar" where you can learn practical LC analysis know-how in just 30 minutes. In this seminar, we will cover useful topics in a total of six sessions, including tips for choosing detectors, how to utilize reverse phase columns, scaling up to preparative LC, approaches for analyzing hydrophilic and highly polar compounds, case studies of low-adsorption HPLC, and improving purity through solid-phase extraction. Each session is scheduled to start at 15:00. Event Themes: • October 6 (Tuesday) - Session 1: Tips for Choosing Detectors • October 13 (Tuesday) - Session 2: Tips for Choosing Columns • October 21 (Wednesday) - Session 3: Tips for Preparative LC • October 27 (Tuesday) - Session 4: Approaches for Analyzing Hydrophilic and Highly Polar Compounds • November 5 (Tuesday) - Session 5: Case Studies of Low-Adsorption HPLC • November 10 (Tuesday) - Session 6: Tips for Solid-Phase Extraction

In liquid biopsy research, we will introduce a technical evaluation of proteome analysis to obtain reliable data from trace plasma, as well as case studies on data quality verification using the Contamination Index and Simple Western.