We will be exhibiting at the 2018 Cleaning Exhibition!

[Free Test Available] A cleaning solution made from plants, considerate of the human body and the environment! We are offering materials that include cleaning case studies.

The plant-based ink, paint, and adhesive solvent (aqueous solution) "PAINTSOLV-W" is a cleaning solution with excellent dissolving and cleaning power, while being considerate of human health and the environment! Using it in conjunction with cleaning machines (such as ultrasonic cleaners and shower cleaners) further enhances its cleaning power. 【Features】 ■ A cleaning solution that does not contain toxic substances harmful to humans and the environment ■ A solvent that effectively removes inks, paints, and adhesives in various locations ■ Despite being plant-based, it exhibits excellent cleaning power ■ Recyclable (regenerative) and contributes to waste reduction ■ Prevents discoloration, corrosion, and deterioration of various metal surfaces ■ Not subject to various regulations: Chemical Substances Control Law, PRTR Law, Fire Service Law ■ Low VOC and highly biodegradable *For more details, please contact us or refer to the PDF materials.

• Cleaning agents
• Other consumables

Safely removes stubborn oil stains, tar, carbon, and paint from the human body and the environment.

Our company offers plant-based cleaning agents that can remove stubborn paints, adhesives, heavy oils, and carbon. All of these products are not subject to the PRTR Law (Pollutant Release and Transfer Register Law), are harmless to the environment and human health, and provide excellent cost performance. 【Features】 'SAFETYSOLV' ■ Effective for removing oil stains, tar, carbon, and heavy oil from automobiles and electronic components ■ Excellent liquid durability (reusable) and economical ■ Biodegradable and can be returned to nature 'PAINT USE HAND CLEANER' ■ Effective for removing stubborn paint, ink, and adhesives from hands ■ Does not contain scrubs, so it does not damage the skin and does not cause pipe blockages ■ Serves as an alternative to acetone and thinner *For more details, please download our catalog or feel free to contact us.

• Other cleaning machines
• Cleaning agents

It is a plant-based cleaning solution that demonstrates excellent cleaning and degreasing power through the forces of nature, safe for both the human body and the environment.

SAFETYSOLV removes stubborn oil stains, tar, carbon, heavy oil, adhesives, and more from walls, floors, and machinery. It exhibits powerful degreasing properties due to its combined solvent and surfactant characteristics. It does not contain endocrine disruptors, phosphates, caustic substances such as caustic soda, petroleum-based surfactants or solvents, petroleum distillates, glycols, terpenes, foaming agents, or colorants. ● It is not subject to the PRTR Law (Pollutant Release and Transfer Register Law). ● It is biodegradable and quickly returns to nature. ● It is safe to handle as it is not classified under the Fire Service Act. ● It is water-soluble, allowing for dilution and use.

• Other processing machines

PRTR Law, Fire Service Law, and Organic Regulations not applicable! Introducing a case of cleaning stubborn "tar stains"!

"SAFETYSOLV" is a plant-based cleaning solution capable of removing carbon that has adhered to molds, as well as lubricants and tar attached to parts and machinery. We will introduce examples of cleaning stubborn tar using a combination of a steamer or ultrasonic machine. <Steamer Cleaning> *Steam temperature is approximately 100°C - The use of steam allows for quick cleaning, even for large parts that are difficult to remove. - Contributes to improved work efficiency and reduced workload. <Ultrasonic Cleaning> - By adding temperature (50°C) and stimulation (ultrasound) to the cleaning solution, the cleaning and solubility increase, making it possible to clean even strongly adhered tar. - Taking time allows for effective cleaning of narrow gaps and hard-to-reach areas. - Led to time savings and improved work efficiency. *Cleaning effectiveness may vary depending on the situation. *For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Other machine elements
• Other molds
• Cleaning agents

Safely clean stubborn tar stains using the plant-based cleaning solution SUPERSOLVE.

The stubborn tar stains are cleaned by combining the plant-based cleaning solution SUPERSOLVE (70) with a steamer or ultrasonic cleaner, using steam cleaning or ultrasonic cleaning respectively. Steam Cleaning - By using steam, cleaning can be done in a short time, and it also allows for the cleaning of large parts that are difficult to remove, improving work efficiency and reducing the burden of work. - The steam injection time allows for cleaning in just a few seconds (the steam temperature is approximately 100°C). Ultrasonic Cleaning - By adding heat (50°C) and stimulation (ultrasound) to the cleaning solution, the cleaning and solubility are enhanced, allowing for the cleaning of tar that is firmly adhered. - Taking time allows for effective cleaning of narrow gaps and hard-to-reach areas. - Time reduction and improvement of work efficiency. *The cleaning effect may vary depending on the situation.

• Assembly Jig
• Other painting machines

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube