We will participate and exhibit at the "Kata Technology Workshop 2018 in Fukui."

Introducing shim plates for press processing! Renowned for their tolerance accuracy!

The shim plate "THG" is made from stainless steel material SUS301 and has achieved a hardness of HRC 47-54 through a special heat treatment, making it suitable for press processing. This product, measuring 300mm in width and 1000mm in length, features thickness markings at 20 locations, eliminating the problem of not knowing which thickness shim plate you have after cutting. Additionally, it offers superior durability compared to standard shim steel plates. 【Features】 ■ Achieves a maximum tolerance of ±0.001mm ■ Excellent durability ■ Wide range of lineup ■ Special processing available from a single shim *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• stainless

Outstanding water displacement power! A rust prevention agent that repels surface water droplets and forms a rust-resistant coating.

Are you struggling with rust removal? Prevent rust before it starts! Use Sabinikuin for rust prevention! No hassle of pre-wiping, "increased work efficiency!" ★ Outstanding water drainage performance! 【Exceptional water displacement power!】 Even when wet, it repels surface water droplets and forms a rust-proof film! ★ Low viscosity, ultra-thin soft film (approximately 1 to 2 microns) It dries moderately without stickiness in about 15 minutes after application, allowing for economical rust prevention over a wide area with a small amount. Additionally, it won't interfere with subsequent installation processes. ★ Rust prevention period: approximately 1 to 2 years Although it forms a thin film, using it for the long-term rust prevention of metal parts and machine tools can reduce defects caused by rust.

• Press Dies
• Rust Inhibitor

Persistent rust! It can be wiped off quickly without taking much time!

★Three Key Points to Choose★ <1> Rust can be removed in 5 to 10 minutes! Powerful degreasing and rust removal capability <2> Rust remover that does not require rinsing! <3> Corrosion inhibition effect: It suppresses erosion by acids and the recurrence of rust. *Note: There is no long-term rust prevention effect. ■Applications ● Removal of rust from metal parts generated during the manufacturing process ● Removal of rust from metals that occurred during the storage of materials and parts ● Removal of rust from factory machinery, tools, jigs, electrical equipment molds, etc. during use ● Removal of rust from construction hardware, office equipment, automobiles, etc. Note: It may affect materials with weak corrosion resistance (such as non-ferrous metals and sintered materials). In this case, please rinse with water or wipe with a dry cloth. ★Samples and SDS data are also available, so please feel free to contact us.

• Press Dies
• Rust Inhibitor
• Other consumables

For organizing and maintaining the appearance of molds. Also effective against rain, wind, dust, and rust! We protect your "molds."

To store molds that are not used for a while for the production of supply parts, there are times when we need to keep them, right? However... There’s no space for that, so they end up exposed outdoors... It’s hard to find them, and they get rusty... We cover them with blue tarps, but they quickly become tattered... Since they are large, it’s a struggle just to cover them... Do you have such troubles? The mold storage cover "Dai-Guard" will solve your problems! ▼ Excellent durability! The top is made of a material with excellent abrasion resistance, and the sides use thick UV-resistant sheets! Designed for outdoor storage, it is strong against sunlight and wind and rain! ▼ Convenient for management! It has a transparent pocket on the side! You can put a management sheet inside, making it easy to see the contents at a glance! ▼ Easy to put on♪ One side can be opened and closed with Velcro, so it can be put on by one person! ■ Specifications / Material - Color: Only Green x Gray (1 color) - Size: 4 types (S, M, L, XL) Custom sizes available. - Top green part: Polyester canvas - Silver part: UV #4000 - One side of the short side opens and closes with Velcro - Drawstring (with cord tightening mechanism) around the bottom perimeter

• Press Dies
• Other packaging materials

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.