We will be exhibiting at the "International Aerospace Exhibition 2018 Tokyo." *A precision technology handbook will be given to visitors!

Total support for precision micro machining, finishing, precision cleaning, and clean packaging is available. Introduction of multi-variety compatible parts feeders and thin film sheet suction plates.

Our company manufactures components and products for semiconductor manufacturing equipment through high-precision "micro-hole processing" and high-quality "mirror finishing." One of our major features is our ability to provide total support from processing to finishing, precision cleaning, quality inspection, packaging, and shipping. We also handle many components for vacuum devices, performing high-quality finishing that suppresses outgassing. Additionally, we conduct precision cleaning, inspection, and packaging in a clean room, delivering products vacuum-packed to enable direct installation into our customers' equipment. We also manufacture and sell the vibration-free parts feeder "Trefeeder," which reduces chipping, scratches, and static electricity in electronic components. Currently, we are offering "Precision Processing Technology Handbook Vol. 4," which introduces examples of our work. [Our Technology and Support] ■ Precision micro-hole processing ■ Ultra-fine finishing ■ Precision micro-component processing ■ Precision micro-groove processing ■ Metal 3D printing ■ Design/Manufacturing support *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other machine elements
• Contract manufacturing
• Processing Contract

We will be exhibiting at 3D Printing 2017!

Toray Precision Corporation has been solving customer problems and contributing to society with ultra-precision microfabrication technology since its establishment in 1955. We will be exhibiting at this exhibition a wide range of products, including not only samples created with metal 3D printers but also a collection of our long-cultivated ultra-precision microfabrication technology (processing samples). We invite you to visit our booth to see, touch, and experience them firsthand.

• Processing Contract

A must-see for those considering 3D printing with metal! The key points of design for 3D models are all covered in this one book!

The "Metal 3D Printer Handbook" is a must-read booklet for those considering metal 3D printing (metal additive manufacturing), featuring the principles of shaping, key points for designing models, and case studies. In most cases, additional material known as support is required to support the printed object during the shaping process. This handbook clearly explains the points for designing to minimize that support. 【Contents】 ■ About metal additive manufacturing ■ Design rules ■ Examples of supports and strategies to avoid them ■ Methods for removing supports ■ How to order and company introduction *Currently, we are offering the "Metal 3D Printer Handbook" as a special gift exclusively for Ipros users! For more details, please contact us or download the catalog to view.

• Processing Contract

Yamamoto Vinitar Co., Ltd. will be exhibiting at the "Frozen, Retort, and Instant Food Material Technology Exhibition" held at "Pacifico Yokohama Exhibition Hall C." Concurrently, the "2nd Nutritional Food Material Exhibition (a B to B food material exhibition focused on health and nutrition)" and the "9th P&B Japan" (a retail, baking, and confectionery exhibition) will also take place. At our booth, we will showcase a demonstration of the 'Range Type' high-frequency thawing device, along with a panel display of high-frequency thawing devices (small batch type; processing capacity of 60kg to 170kg/h, medium batch type; processing capacity of 200kg to 500kg/h, medium to large continuous type; processing capacity of 200kg to 4000kg/h) and provide a consultation desk for high-frequency and microwave heating. If you have any concerns regarding heating, drying, thawing, sterilization, secondary heating sterilization, or pest control using high-frequency/microwave technology, please visit us. [Main Examples of Thawing and Heating Processes] - Heating and drying for confectionery and baking, tempering and melting of butter, thawing of meat, pork, chicken, canned fish, squid, octopus, etc., secondary sterilization of prepared foods, and more. We look forward to your visit. [Exhibited Equipment] ■ High-frequency thawing device 　・ Range type

We will be holding the highly acclaimed Taste Sensor Utilization Seminar again this year as follows. We will invite users as speakers to share actual case studies. <Overview of the Event> - Date and Time: October 9, 2026 (Friday) 13:05 - 16:30 - Format: Online (Zoom Webinar) - Participation Fee: Free - Capacity: 500 people - Speakers: Kanji Doi, Executive Director, Doctor of Agriculture, Marutomo Co., Ltd. Takayuki Suetoki, Deputy General Manager, Technical Development Department, Ariake Japan Co., Ltd. Tomono Yoshimitsu, Consulting Team, Consulting Division, Flavor and Aroma Strategy Research Institute Co., Ltd.

We are pleased to announce the archive distribution of the seminar on the kintone plugin "Mojitori," which can read text from photos and PDFs and convert it into data. 【Three Case Studies of Mojitori Utilization! A Seminar on Improving Workplaces by Reducing Input Errors, Reporting Omissions, and Personalization】 ◆ Seminar Overview The kintone plugin "Mojitori" allows for the automatic input of text data from photos, images, and PDF files into various fields in kintone. In this seminar, we will introduce "three companies' business improvement case studies" utilizing Mojitori. We will specifically explain the challenges faced in different operations, such as label verification in manufacturing, reporting from the field, and managing client information, and why they turned to Mojitori for solutions. 【Recommended for the following individuals】 - Those who want to reduce record-keeping and transcription tasks done on paper or by hand - Those who want to prevent input errors and reporting omissions - Those who want to facilitate information sharing on kintone We hope you find hints that can be useful for your business improvement. We look forward to many participants joining us.

We will be exhibiting at Semicon Japan 2024, which will be held at Tokyo Big Sight from December 11 (Wednesday) to December 12 (Friday). If you are interested, please come to the venue. ■ Products to be exhibited 1. Spectral interference optical thickness sensor CHRocodile 2 DW/ 2IT 2. Area scanner for measuring the thickness and shape of 12" wafers - Flying Spot Scanner (FSS) 3. Chromatic aberration confocal optical line sensor CLS2.0 4. Chromatic aberration confocal line camera CVC 5. Chromatic aberration confocal optical single-point sensor CHRocodile Mini 6. Non-contact thickness measurement sensor for opaque materials Enovasnese 7. Sensor for detecting internal defects non-contactly - Field sensor

Do you have any of these concerns? "I want to ensure proper dispersion, but bubbles won't escape and there are inconsistencies." "It takes too long to degas using vacuum or manual methods, and the process has become reliant on specific individuals." "When mixing at high speeds, it generates heat, causing the materials to deteriorate or harden." "I want to quickly prototype and evaluate new materials or produce small quantities of various items easily." In this seminar, we will provide not only the fundamental information about Awatori Nentaro but also the latest updates. During the live demonstration, we will clearly explain how actual materials mix and the operation screen of the Shinky temperature management solution app. Additionally, we will have equipment and optional products on display in the venue, allowing you to consult while viewing the actual items. In the seminar, you will learn about: - The mixing mechanism and examples of Awatori Nentaro - Stirring methods and heat generation countermeasures according to material viscosity - The latest automation models and syringe filling technology After the seminar, we will hold an open consultation session at the venue for anyone interested. Please register early!