Notice of Participation in the 59th Battery Symposium

We will perform insulated electrostatic coating with excellent chemical resistance, heat resistance, and edge coating properties in situations where insulating tape or film cannot be used!

At Daibei Manufacturing, we perform electrostatic insulation coating on metals and conductors such as stainless steel, copper, and aluminum. We use electrostatic coating materials such as "INSULEED" manufactured by Nippon Paint Industrial Coatings. 【Features】 ● Excellent strength and chemical resistance achieved through high-density design of baked curing ● Insulation coating can be applied after part processing, allowing for after-coating of complex shapes ● Reliable insulation treatment for products under 10mm and sharp edge areas ● Usable in a wide range of fields, including electronics and medical sectors 【Commonly Used Locations】 ● Industrial motor manufacturers ● Industrial switch manufacturers ● Industrial electrical equipment ● Battery manufacturers ● Electronic component manufacturers 【Application Examples】 ● Metal parts for motors ● Complex-shaped busbars ● Insulation of metal covers ● Insulation of metal parts exposed to high humidity (battery fixing parts) ● Transmission boxes under high humidity ● Metal products exposed to seawater environments *For more details, please download the PDF or feel free to contact us.

• Other electronic parts
• EMS
• Other machine elements

This book is a technical reference that allows you to learn the basic knowledge of electrodeposition coating and insulating electrodeposition coating technology!

In the manufacturing of industrial motors, industrial switches, industrial electrical equipment, batteries, and electronic components, insulation is an essential requirement. However, we often hear about issues such as difficulties in applying insulation films and tapes in complex shapes or fine grooves, and corrosion (electrolysis) occurring at points where different metals are in contact. Insulating electrodeposition coating can address these issues! So, what kind of performance does electrodeposition coating have in the first place? Furthermore, in what situations can insulating electrodeposition coating be used? This technical document compiles basic knowledge about the technology along with case studies conducted by Okita Manufacturing in the past. ■ Application examples in various scenarios Metal parts for motors Complexly shaped busbars Insulation of metal covers Insulation of metal parts in humid environments (battery mounting parts) Transmission boxes in high humidity Metal items exposed to seawater environments *The textbook on insulating electrodeposition coating can be obtained by downloading the materials.

• Other electronic parts
• Other machine elements
• Other polymer materials

Responding to prototype and mass production needs with low cost and short delivery times. Fine dimension adjustments are also acceptable.

Our company manufactures aluminum and stainless steel battery cases using "welding and bending processing." Since no drawing dies are required, we can produce at a low cost, making it suitable for small-batch production of various types. We can meet a wide range of requirements such as dimensional accuracy, appearance, and airtightness, and we are also capable of welding thin metals of less than 0.1mm. 【Features】 ■ Bending thin plates using a press machine and welding with a laser welder, etc. ■ Eliminating the deep drawing process allows for production in a short period. ■ Capable of meeting various requirements such as dimensional accuracy and airtightness. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other Auto Parts
• Contract manufacturing
• Prototype Services

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

In response to the rapid advancement of chiplet integration*¹ and finer wiring in semiconductor package substrates—driven by the explosive growth of the AI market—we are pleased to announce the launch of our next-generation semiconductor package substrate AOI system, the “SX7000” series, and our “LX7000” laser repair system. Orders are now being accepted. *1 A technology that divides what was traditionally integrated on a single large silicon die into multiple smaller chips, each responsible for a specific function, and connects them at high speed within a single package. This approach is increasingly being adopted in high-performance processors for AI applications. ■Line/Space SX7400：1.5μm/1.5μm～ SX7300：2μm/2μm～ LX7000：2μm/2μm～ ■Target product size SX7400：615mm × 515mm SX7300：615mm × 515mm LX7000：615mm × 515mm

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and can respond to various situations from passing to stationary. It can be used for the opening and closing of the input doors at waste treatment plants, as well as for gates where vehicles pass and in outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 - Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism. - Protection rating IP68 reduces the risk of water ingress. - Ten times the load capacity compared to conventional embedded park sensors (according to our comparison). - Can distinguish between vehicles even when they pass continuously, one by one. - Can be installed on rebar and steel plates. *For more details, please refer to the PDF document or feel free to contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.