[Explanation Material] Registered: Causes and Countermeasures for Stainless Steel Containers Rusting Quickly Under Certain Conditions.

Stainless steel is a metal that is "difficult" to rust!

We sometimes receive inquiries from customers saying, "Even though it's made of stainless steel, it rusted quickly." Stainless steel, as the English words "Stain (rust, corrosion) + less (less) + steel (steel)" suggest, is an alloy of iron that is highly resistant to rust. While it is much less prone to rust compared to regular iron, it is not completely rust-proof. This PDF document summarizes "Why is stainless steel resistant to rust?", "What causes rust on rust-resistant stainless steel?", and "What are the rust prevention measures for stainless steel containers?" You can view it immediately by downloading the PDF.

• Stainless steel container

I have summarized the important cleaning methods to make stainless steel containers last longer.

After using a stainless steel container, it is essential to clean the container. However, incorrect cleaning methods can cause scratches or lead to rust. Here, we will introduce important cleaning methods to help prolong the life of stainless steel containers.

• Stainless steel container

BA material, 2B material, buff polishing, electrolytic polishing... A grand reveal of stainless steel surfaces that cannot be discerned by the naked eye!

Smooth, rough, silky... Depending on the material and surface finish, stainless steel shows various appearances. However, it is not possible to see what the actual surface looks like just by visual inspection. Therefore, this time, we will introduce photographs of stainless steel surfaces taken using a scanning electron microscope (SEM). *What is a scanning electron microscope (SEM)?* Unlike optical microscopes (such as magnifying glasses and general microscopes) that use light, a scanning electron microscope uses electron beams. It allows us to clearly see fine surface structures that cannot be observed with optical microscopes.

• Stainless steel container

Perfect for food factories! A simple structure dustpan made of all stainless steel.

A dustpan made of all stainless steel that is resistant to rust and hygienic. It has a small contact area, allowing it to be used without wobbling even on uneven floors. - Ideal for cleaning hygienic places such as food factories and areas around water. - Dustpans can be stacked on top of each other for space-saving storage. - The 【DPS-W】 model has a drainage hole in the tray, allowing you to stand while draining excess water and collecting only the trash.

• Other cleaning tools

This is an all-stainless steel cart used in a wide range of fields, including pharmaceuticals, physics and chemistry, food manufacturing, and kitchens.

○ This cart is made of stainless steel (SUS304), making it resistant to rust and easy to handle. ○ The handle is fixed by welding, ensuring stability without wobbling. ○ To ensure safe use, the corners of the cargo area are rounded. ○ It uses reinforcement materials on the back that do not accumulate dirt, making it sturdy and hygienic. ○ The 【NW-D-FB】 model comes with a foot-operated brake. Simply stepping on the pedal easily locks the wheels.

• Trolley

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

[To the owners of parking lots and parking lot construction companies] "I’m worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask that customers arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.