Desiccator Custom Case Study Introduction Video

Each room is independent, and there is no impact on other rooms from the opening and closing of doors.

The gas replacement independent desiccator N-1804C/CX and N-1802C/CX is a storage unit for N2 purging. Each chamber is independent, and there is no impact on other chambers when the doors are opened or closed. The doors are equipped with magnetic gaskets for high airtightness and ease of use. The flow meter has a range of 0 to 5 liters/min with a valve and independent piping. Additionally, the CX type comes with a joint for a φ6 tube, and the gas sealing valve has a connection diameter of φ8. For more details, please contact us or refer to the catalog.

• Dehumidifier

There is no waste because the N2 flow rate is controlled by a timer during the opening and closing of the door.

The N2 gas control desiccator NC-780C/NC-360C has no waste as it controls the N2 flow rate with a timer during door opening and closing. The door features a magnetic packing type, ensuring high airtightness and ease of use. The flow meter is equipped with a flow adjustment valve for 0 to 5 liters/min. The gas IN side has a joint for a φ6 tube, and the timer is set for 0 to 30 minutes, which is the N2 supply time when the door is closed. N2 control is OFF when the door is open and ON when it is closed. For more details, please contact us or refer to the catalog.

• Dehumidifier

Transport products while keeping them in a dehumidified storage! Wagon desiccator!

▼ Products that require dehumidifying and drying conditions can be transferred and transported. It is also suitable for transporting products from clean rooms. ▼ The shelves are equipped with slide rails, allowing them to be fixed at any position, making effective use of space. ▼ You can choose the specifications for the doors. MK: Magnetic packing type HK: Sealed handle type ▼ Depending on the specifications, a top panel can be installed.

• Drying Equipment

Large capacity for storage! Excellent functionality!

This is a desiccator that has been meticulously designed with a focus on airtightness, operability, and safety, thanks to our unique technology and know-how that developed the first aluminum frame plastic desiccator in the country. You can choose the specifications of the door. MK: Magnetic packing type PK: Snap lock type We also offer a wide range of accessories, including additional shelves, slide rails, hygrometers, and earthquake-resistant door locks. Please feel free to contact us.

• Dehumidifier

Large capacity for storage! Excellent functionality!

This is a desiccator that has been meticulously designed with a focus on airtightness, operability, and safety, thanks to our unique technology and know-how that developed the first aluminum frame plastic desiccator in the country. You can choose the specifications for the door. MK: Magnetic packing type HK: Sealed handle type We also offer a wide range of accessories, including additional shelves, slide rails, thermohygrometers, and earthquake-resistant door locks. Please feel free to contact us.

• Dehumidifier

The dehumidifying capability has been enhanced. It is suitable for low humidity with a setting value of 10% RH to the surrounding humidity.

▼ This is a desiccator that has been meticulously designed with a focus on airtightness, operability, and safety, developed with unique technology and know-how as the first aluminum frame plastic desiccator in the country. ▼ Equipped with a powerful dehumidifier DEHUMER that can handle door opening and closing as well as large storage. It operates on a forced convection system, controlling the opening and closing of the intake and exhaust valves inside the chamber. After reaching the set humidity, it performs ON-OFF control using a semiconductor sensor. ▼ You can choose the specifications of the door. MK: Magnetic packing type HK: Sealed handle type ▼ We also offer a wide range of accessories, including additional shelves, slide rails, hygrometers, and earthquake-resistant door locks. Please feel free to contact us.

• Dehumidifier

A large vacuum desiccator capable of accommodating various tests and research!

You can use it for the following tests and research: ▼ Vacuum forming degassing device ▼ Storage of chemicals and products that are sensitive to general air environments such as oxygen and carbon dioxide We can accommodate various specifications such as size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

Medium-sized vacuum desiccator capable of accommodating various tests and research.

● This is a medium-sized vacuum desiccator with a capacity of 30L. ● There is an outlet inside the chamber, so power can be used. ● Operations such as degassing and defoaming can be performed while stirring with a stirrer. We can accommodate various specifications such as size and material. Please feel free to contact us!

• Drying Equipment

A small vacuum desiccator capable of accommodating various tests and research.

● This is a small vacuum desiccator with a capacity of 12L. ● There is an outlet inside the chamber, so electricity can be used. ● Operations such as degassing and defoaming can be performed while stirring with a stirrer. We can accommodate various specifications such as size and material. Please feel free to contact us!

• Drying Equipment

This is a desiccator that allows for vacuum degassing operations using a stirring atmosphere.

● This is a medium-sized vacuum desiccator with a capacity of 30L. ● A stir bar can be installed inside the chamber, allowing the use of a stirrer. ● Operations such as degassing and defoaming can be performed while stirring. We can accommodate various specifications, including size and material. Please feel free to contact us!

• Drying Equipment

A compact vacuum desiccator capable of handling various tests and research!

● This is a small vacuum desiccator with a capacity of 12L. ● A stir bar can be placed inside, allowing the use of a stirrer. ● Operations such as degassing and defoaming can be performed while stirring. We can accommodate various specifications such as size and material. Please feel free to contact us!

• Drying Equipment

It is a small vacuum desiccator with a lid that opens upwards.

This is a small vacuum desiccator with a capacity of 12L. The lid opens upwards. It can be used for tests and research such as: ▼ Defoaming device for vacuum molding ▼ Storage of chemicals and products that dislike general air environments such as oxygen and carbon dioxide We can accommodate various specifications including size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

A compact vacuum desiccator capable of accommodating various tests and research!

● This is a small vacuum desiccator with a capacity of 7L. ● It has a lid that opens from the top. It can be used for tests and research such as the following: ▼ Defoaming device for vacuum molding ▼ Storage of chemicals and products that are sensitive to general air environments like oxygen and carbon dioxide We can accommodate various specifications including size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

A compact vacuum desiccator capable of accommodating various tests and research!

You can use it for the following tests and research. ▼ Vacuum forming de-airing device ▼ Storage of chemicals and products that are sensitive to general air environments such as oxygen and carbon dioxide We can accommodate various specifications such as size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

A medium-sized vacuum desiccator capable of accommodating various tests and research!

You can use it for the following tests and research. ▼ Vacuum forming degassing device ▼ Storage of chemicals and products that are sensitive to general air environments such as oxygen and carbon dioxide We can accommodate various specifications such as size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

It is a stainless steel vacuum desiccator with excellent durability and corrosion resistance.

This product is made of stainless steel with bending processing, focusing on durability. The front window is made of transparent acrylic, allowing visibility into the interior.

• Vacuum Equipment

It is a stainless steel vacuum desiccator with excellent durability and corrosion resistance.

This is a durable product made of bent stainless steel. The front window is made of transparent acrylic, allowing you to see inside.

• Deaeration device

A large vacuum desiccator capable of accommodating various tests and research!

You can use it for the following tests and research. ▼ Vacuum forming de-airing device ▼ Storage of chemicals and products that are sensitive to general air environments such as oxygen and carbon dioxide We can accommodate various specifications such as size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

This is a desiccator made of yellow acrylic.

This is a desiccator made of yellow acrylic. It protects stored items from deterioration due to ultraviolet rays. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

Large desiccator for storing 8-inch wafers!

It is a large desiccator for storing 8-inch wafers. We offer fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

A large desiccator with a capacity of 780L that performs dehumidification using a membrane blend dryer!

This is a desiccator that has been meticulously designed with a focus on airtightness, operability, and safety, thanks to our unique technology and know-how that developed the first aluminum frame plastic desiccator in the country. This desiccator is equipped with a membrane dryer that dehumidifies by passing compressed air through a hollow fiber membrane. ● It is a large desiccator with a capacity of 780L. ● It is a type that performs dehumidification using a membrane dryer. ● It can handle low humidity levels of 20% or less. ● The door features a magnetic packing system for easy opening and closing. ● Compressed air is required separately. We also offer a wide range of accessories, including additional shelves, slide rails, hygrometers, and earthquake-resistant door locks. Please feel free to contact us.

• Dehumidifier

A small stainless steel desiccator with excellent chemical resistance, durability, and static electricity prevention.

The stainless steel desiccator S-40 is a compact desiccator made of stainless steel, featuring excellent chemical resistance, durability, and static electricity prevention. The door is equipped with a snap lock, the body material is SUS430, and the window material is transparent acrylic. The shelf load capacity is 20 kg evenly distributed, and it includes one silica gel container made of SUS430 with a volume of 40L. For more details, please contact us or refer to the catalog.

• Dehumidifier

We accept fully customized desiccators.

By making all five rooms independent gas pathways, we minimized the impact of gas environment changes caused by door openings and closings. Additionally, the flow rate of the enclosed gas can be automatically controlled by sensors. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

We accept fully customized desiccators.

This is a large acrylic vacuum desiccator. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

We accept fully customized desiccators.

This is a large vacuum desiccator made from a material that cuts ultraviolet rays. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

We accept fully customized desiccators.

The shelf material is SUS430, and the surrounding panels are anti-static PVC sheets. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

We accept fully customized desiccators.

This is a gas replacement desiccator made of stainless steel, emphasizing high airtightness. Our company offers fully customized desiccators, including gas replacement, vacuum, and clean specifications.

• Drying Equipment
• Other physicochemical equipment
• Dehumidifier

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall