We will be exhibiting at the 5th Interphex Osaka!

High power for reduced heating time! Stainless container with a heater that can warm up in a short time.

1. Compact Equipment The heater unit is directly attached to the container, making the equipment compact and space-efficient. Since all the devices are mounted on the container, moving it is easy. 2. No Initial Cost Chillers with both heating and cooling functions are expensive and have a higher initial cost compared to heaters. If only heating of the jacket is needed, heaters are overwhelmingly more cost-effective in terms of initial investment. 3. Can Quickly Heat the Jacket By adopting a 7.5kW heater, the water in the jacket can be heated to high temperatures in a short time, warming the contents. Product Features - The heater is installed in the jacket section, allowing for liquid heating with just this unit. - It has a dry-run prevention feature, so the heater stops when the water in the jacket is low. - Equipped with a level gauge to check the water level in the jacket. - The temperature of the mixed liquid can be adjusted through the linkage between the thermometer and the heater. - A stirrer can be attached to the container, allowing for uniform heating of the contents. As this is a made-to-order product, modifications to "dimensions" and "materials" can be made, as well as custom processing to suit specific applications.

• tank

Recommended for liquid stirring and discharge! A stirring unit that combines a stirrer and a valve with a stainless steel container.

○ The container has a bottom plate that is inclined in the discharge direction, allowing for complete liquid discharge without residue. ○ It is equipped with a centrifugal stirrer that can mix low to medium-high viscosity liquids, without any blades. ○ The stirrer can be selected between air motor type and electric motor type. ○ The valve is a straight type with low flow resistance and features a diaphragm design that is excellent in chemical resistance. ○ The stirrer and valve can be easily disassembled and cleaned with a Heller connection.

• Stainless steel container

This is an original air motor mixer from Nitto Metal Industry. It is ideal for preventing foaming during mixing and for stirring high-viscosity liquids.

- It can stir in a sealed state with a Heller connection. Pressure reduction is also possible. - It can stir liquids with low to medium-high viscosity. - It comes standard with a waste receiver to prevent contamination from wear particles generated at the shaft seal. - The stirring body is a Bernoulli flow stirring body type BEAG E, which is less likely to incorporate air. (Patent No. 6169207) - It can be used in explosion-proof areas. - Made entirely of stainless steel, it is resistant to rust and hygienic. - It can be used without lubrication, so there is no oil splatter. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntma-s/

• Mixer/agitator

This is an original electric motor stirrer from Nitto Metal Industry. It is ideal for preventing foaming during stirring and for stirring high-viscosity liquids.

- It features an easy-to-remove and attach connection. - It can stir in a sealed state and is usable under both pressurized and vacuum conditions. - It can stir liquids with low to medium-high viscosity. - It comes standard with a debris collector to prevent contamination from wear particles generated at the shaft seal. - The stirring element is a Bernoulli flow stirring element type BEAG E, which is designed to minimize air entrapment. (Patent No. 6169207) - It is equipped with a standard controller that allows for speed adjustment. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntme-a/

• Other energy equipment

Recently, we held technical training sessions for the MilkoScan FT3 at five locations nationwide. In this training, we provided a wide range of useful information for operating the equipment, including explanations of the principles and structure of the device, how to create measurement products, daily maintenance, and how to respond to issues when they arise. Additionally, this year we introduced new methods for utilizing digital services (such as FossCalibrator and IQX) and also prepared hands-on sessions where participants could experience operating the equipment using a PC. Thank you to everyone who participated. Please feel free to contact us with any questions after the training. ------- At Foss Japan, in addition to training sessions and workshops to ensure you can use our equipment with confidence, we hold many events throughout the year. In seminars and open houses tailored to specific industries and analytical techniques, we showcase Foss's latest analytical solutions. -------

We will be exhibiting at the "Monozukuri Fair 2026" held at Marine Messe Fukuoka from October 14 (Wednesday) to 16 (Friday). We will have a working model of a "small winch" powered by an electric driver equipped with our uniquely developed self-locking reduction mechanism "shoji-lock," and we will set up a corner where you can experience the actual lifting and lowering of workpieces. Please stop by. (Hall A, Booth Number AS-57)

[Lecturers] EY Strategy and Consulting Co., Ltd. Infrastructure Advisory Partner Kenichiro Fukuda Strategy Partner Ken Fujiyama Infrastructure Advisory Director Takashi Matsumura [Key Lecture Content] The water supply and sewage business is facing structural challenges such as facility aging, a shortage of workforce, and a decrease in revenue due to population decline. The government is promoting the introduction of Water PPPs, regional consolidation, and the digital transformation of water supply and sewage systems, marking a significant turning point in the way these businesses are operated. This change is expanding business opportunities for private companies in various areas, including operation and maintenance, pipeline renewal, digital technology, and the utilization of smart meters and data. Additionally, as a means of expanding business domains and enhancing competitiveness, there has been an increase in capital and operational partnerships and M&A between companies, leading to industry restructuring. In this seminar, based on the latest trends in policy and the market, we will introduce business strategies for private companies to enter and expand in the water supply and sewage market, including the use of M&A and capital operational partnerships, drawing on achievements from both public and private support.

[Lecturer] Koichi Iwama, Professor, Faculty of Economics and Management, Wako University / Chairman, Resource Economics Committee, Petroleum Technology Association [Key Lecture Content] In light of the prolonged crisis in the Strait of Hormuz, what will happen to the development of shale gas and shale oil in the United States moving forward? After the midterm elections, what will be the international LNG prices under the Trump administration after winter 2027? How will Japan's business strategies related to LNG projects grow? A leading expert on the shale gas and shale oil revolutions will clearly explain the future outlook.

[Lecture Items] 1. Initiatives for Promoting Smart Cities at the Ministry of Land, Infrastructure, Transport and Tourism Ministry of Land, Infrastructure, Transport and Tourism, Urban Bureau, International and Digital Policy Division, Digital Information Utilization Promotion Office Planning Specialist Mr. Masahiro Kobayashi 1. Initiatives to Promote the Spread of Smart Cities 2. Promotion of the Development and Utilization of 3D Urban Models in Project PLATEAU 3. Q&A / Business Card Exchange 2. Smart Cities in the AI Era - Creating "Light Cities" that Continuously Unleash the Potential of Urban Areas - NTT Urban Solutions Inc., Urban Development Promotion Headquarters, Innovation Promotion Department, Deputy Director NTT Urban Development Corporation, Digital Innovation Promotion Department, Director Mr. Shinya Date 1. Changes in the Environment Surrounding Smart Cities and the Transformation of Urban Development 2. NTT's Vision for Creating "Light Cities" - Urban Development that Continues to Unleash the Potential of Cities 3. Evolution and Value Creation of Smart Cities in an AI-Driven Society 4. Considering Future Urban Models and Co-Creation Possibilities from Social Implementation Cases in Hibiya 5. Q&A / Business Card Exchange