Notice of Participation in the 5th [Nagoya] Machine Element Technology Exhibition

Achieving high hardness, strong adhesion, and excellent wear resistance with room temperature film formation! By coating after removing impurities, it also contributes to improving fuel efficiency in automotive parts!

The hydrogen-free DLC film (ta-C) using the FCVA method differs from existing PVD and CVD methods by removing impurities through an electromagnetic filter, resulting in fewer particles, excellent adhesion, and high wear resistance. Additionally, since film formation is possible at room temperature, it can be applied to various materials such as low melting point materials like resins, ceramics, and rubber. Furthermore, thick films of over 10 micrometers can be created, enhancing the quality of automotive parts and increasing added value through longer lifespan. In addition to the DLC film, please also try the composite metal film "MiCC film," which excels in release properties during plastic molding. 【Features】 ■ Achieves high hardness, strong adhesion, and excellent wear resistance ■ Capable of creating thick films over 10 micrometers ■ Film formation possible at room temperature ■ Applicable to various materials *For more details, please download the PDF document or feel free to contact us.

• Coating Agent

We provide super DLC (hydrogen-free ta-C film), Micc film, and various metal films using the FCVA method.

FCVA (Filtered Cathodic Vacuum Arc) provides high-quality coatings that are on a different level compared to existing methods such as PVD and CVD. Additionally, since no heating is required during the film formation process, deformation of the substrate does not occur, allowing for coatings on resin components as well. In particular, DLC films (ta-C) have the following characteristics: 1) Extremely close to diamond (high sp3 bonding) 2) Very high hardness, adhesion, and wear resistance 3) Hydrogen-free 4) Film thickness: from a few nm to 10 nm 5) Can be deposited on inner diameters These features make it suitable for various fields such as hard disks, precision molds, and wear-resistant parts. *For more details, please download the catalog or contact us.*

• Other painting machines

Technical data provided: Achieving high hardness, high adhesion, and excellent wear resistance with room temperature film formation! DLC (TAC) coating is possible for plastics and ceramics.

Hydrogen-free DLC films (ta-C) using the filtered arc method differ from existing PVD and CVD methods by removing impurities through an electromagnetic filter, resulting in fewer particles, excellent adhesion, and high wear resistance. Additionally, since the film is formed at room temperature, it can be applied to low melting point materials such as plastics and rubber, as well as various materials like ceramics. Furthermore, it is possible to create thick films of over 10 micrometers, enhancing the quality and longevity of automotive parts, thereby increasing added value. In addition to DLC films, please also try our composite metal film "MiCC film," which excels in release properties during plastic molding. 【Features】 ■ High hardness film free of particles (droplets) ■ Applicable to various materials including low melting point materials like resins and rubber, as well as ceramics ■ Improved wear resistance for sliding components ■ Capable of creating thick films over 10 micrometers ■ High corrosion resistance against gases such as ozone and NOx *For more details, please download the catalog or feel free to contact us.

• Coating Agent

DLC and metal film coatings can now be applied to plastic and ceramic materials, significantly improving wear resistance and scratch resistance!

Coating on metals and DLC (TAC), which was difficult for plastic and ceramic materials, has become possible. This also contributes to the replacement of metal materials with plastic materials! Since the coating is done at low temperatures, there is no deformation or alteration of the substrate materials. Furthermore, by coating a decorative film (metal film) on DLC (TAC), we can provide a high-hardness film that exudes luxury. Coating is possible not only on DLC (TAC) but also on metal films. 【Features】 ■ High hardness ■ Scratch resistance ■ DLC (TAC) + decorative film is possible *For more details, please download the catalog or feel free to contact us.

• Coating Agent

Softex Corporation will be exhibiting at the "40th Electro Test Japan" held at Tokyo Big Sight. At our booth, we will showcase the micro-focus X-ray inclined CT inspection device "SHRα," which demonstrates its power on components such as implemented multilayer boards and three-dimensional structures that have been difficult to inspect until now. [Booth Number: East Hall 5 E15-17] We sincerely look forward to your visit.

Tohsan Electronic Equipment is exhibiting our product "ePI-09" used in calligraphy robots and "T-Shirt-kun" related goods at MOBIO (Monozukuri Business Center Osaka). Period: November 4, 2025 - November 27, 2025 Location: MOBIO The "ePI-09" is one of the smallest in the industry, yet it features 4-axis synchronous control and various interpolation functions (such as linear, arc, and helical). It is compatible with Raspberry Pi, has a rich API, and enables low-cost and short-term development. It can be stacked with up to 8 units and supports control of up to 32 axes. Additionally, at the "T-Shirt-kun" related exhibition, we are showcasing actual printed T-shirts and flyers with coupons. You can closely see the quality of the products and the image of their use. We hope you stop by!

Kanadebia Co., Ltd. will be exhibiting at the "9th Railway Technology Exhibition 2025 Mass-Trans Innovation Japan 2025" held at Makuhari Messe. This exhibition has been held since 2010 as a comprehensive trade fair where various railway-related technologies, including railway and transportation systems, infrastructure technology, facilities, power, transportation, operation management, vehicles, interiors, and passenger services, come together. Please be sure to check out the "Railway Camera System" offered by Kanadebia. We sincerely look forward to your visit.

On November 20, 2025 (Thursday) and December 2, 2025 (Tuesday) from 11:00 to 14:00, our representative, certified public accountant and tax accountant Koichi Yokoyama, will be speaking at a free webinar hosted by Otsuka Shokai. He will explain important points to be aware of regarding the revised Construction Industry Law. [Construction Industry Law / Public Works Appropriateness Promotion Law] - Prevention of omissions in the description of construction contracts - Obligation to notify "risk" information before the contractor's contract - Mutual exchange of original documents for construction contracts - Digitization of estimates, contracts, and order forms/acceptance letters We are entering an era where contracts must be documented in writing and stored electronically. At Paperlogic, we fully support companies that are transitioning from paper to digital. We also offer free consultations with certified public accountants and tax accountants, so please join us!

We would like to inform you that we will be exhibiting our products at the Membrane Symposium 2025. If you are planning to attend, please feel free to stop by. ❚ Products Scheduled for Exhibition - Artificial Lipid Bilayer Experimental Device | Orbit mini You can easily measure channel activity at the single-molecule level. This device allows for the formation of lipid membranes, reconstitution of membrane proteins, and single-channel measurements in experiments using artificial lipid bilayers, all performed with just a micropipette, enabling functional and structural analysis of target membrane proteins and evaluation of drug effects. - Liposome Preparation Device | Vesicle Prep Pro This is the world's first device that can produce giant unilamellar vesicles (GUVs) with diameters ranging from 1 to 30 μm without organic solvents, using the electroporation method (vibrating hydrated lipid films in an alternating electric field). - Auto Patch Clamp System | Port-a-Patch mini This compact system eliminates the need for a microscope, vibration isolation table, manipulator, and Faraday cage, which are typically required for conventional patch clamp experiments. It allows for easy data acquisition and verification without the need for specialized skills or experience.