DKSH Japan Co., Ltd. will exhibit at the 1st Pharma Lab EXPO.

Particle size distribution of nanoparticles, zeta potential measurement, particle identification by fluorescence, and high-speed measurement scanning 11 locations within the cell.

The ZetaView x30 series nanoparticle tracking analysis (NTA) device can analyze the size and concentration of individual particles, such as exosomes and liposomes, by capturing video of Brownian motion. It can be equipped with up to four wavelengths of lasers. The high-speed laser/filter switching suppresses fluorescence fading and accurately determines the particle size distribution of fluorescently labeled particles. Additionally, a new feature called Colocalization option allows for the determination of the ratio of double-stained particles. 【Features】 ■ Scanning measurement at up to 11 locations ■ Auto-alignment and auto-focus functions ■ Equipped with up to 4 lasers, allowing for particle size distribution measurement using various fluorescent labels ■ Capable of measuring zeta potential

• Optical Measuring Instruments
• Other Analysis

A viscometer utilizing microfluidic control engineering and microelectromechanical systems technology!

The "m-VROC" is an ultra-micro sample viscometer that employs an innovative measurement system utilizing Microfluidics and MEMS (Micro-Electro-Mechanical Systems) technology. It demonstrates high precision and high reproducibility even with small sample volumes (20μL and above). Additionally, this product allows for easy and fast operation and is compatible with non-Newtonian fluids. 【Features】 ■ Easy and fast operation ■ High shear rate compatibility (up to 1.4×10^6/sec) ■ Closed system measurement ■ Accurate temperature control (4–70℃) *For more details, please refer to the PDF document or feel free to contact us.

• Viscometer

High-precision viscosity measurement with a minimum of 10μL of micro-sample, up to 100,000 cp. Fully automated system compatible with 96-well plates. Also supports shear rate scanning.

A new ultra-micro viscometer utilizing microfluidic control and microelectromechanical systems technology. The VROC Initium is a fully automated model that handles everything from sample introduction to channel cleaning, solving the issues of traditional viscosity measurement that required cumbersome procedures and large sample volumes. It contributes to research and development and quality control across a wide range of fields, including biopharmaceuticals, biological samples, inkjet inks, various petrochemical products, and battery materials. [Features] - Fully automated system compatible with 96 wells - High precision and high reproducibility - Supports temperature and shear rate scanning - Small sample volume (10 μL and up) - Wide measurement range (0.2 to 100,000 cp) - High shear rate capability (up to 1.6 million /sec) - Accurate temperature control (4 to 70 °C) - Closed system measurement - Compatible with non-Newtonian fluids

• Composite Materials
• Viscometer
• Testing Equipment and Devices

High-sensitivity biosensor based on the SwichSENSE principle using DNA as a fixation tool.

heliX/heliX+ is a high-sensitivity device for analyzing molecular interactions and protein properties that adopts a new principle called "SwitchSENSE," which uses DNA nanolevers as a immobilization tool. It has approximately 100 times the sensitivity of existing biosensors and possesses a wide range of applications and analytical capabilities, including the analysis of high-affinity interactions that are difficult to measure with conventional devices, dual specificity interaction analysis, and enzyme kinetics analysis of nucleic acid-related enzymes. Additionally, the chip can be reused multiple times. Since DNA is used for immobilization, it allows for a high degree of freedom in presenting molecules on the chip, such as immobilizing two types of molecules. There are also no effects from the immobilization matrix. Furthermore, being a sensor that uses nucleic acids allows for easy implementation of enzyme kinetics analysis for nucleic acid-related enzymes such as polymerases and endonucleases, and it demonstrates significant power in evaluating inhibitors of viral proliferation. The modular design of the device also enables easy high-throughput capabilities. It can be utilized in a wide range of research, from drug discovery to biophysical fundamental research on biomolecules.

• Analytical Equipment and Devices

A flow imaging microscope capable of particle size distribution and particle image analysis in solution. It is used for detecting impurities in biopharmaceuticals.

Features - Measurement possible with a small sample volume (100 μL and above) - Measurable particle size: 0.3 μm to 600 μm - High-resolution image analysis through threshold optimization - Equipped with autofocus function - Capable of saving raw image (video) files - No sheath fluid required - Easy replacement of flow cell and simple cleaning - Lens interchangeable (2X, 4X, 10X, 20X) - Compatible with dedicated auto-sampler - Compliant with 21 CFR Part 11

• Other physicochemical equipment

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.