New release of "Stainless Steel Circle Blow" to enhance rust prevention effects for drainage applications and more.

This is a tool designed for blowing around pipes and cables. The air flow that blows out evenly at 360° enables drainage, cleaning, and drying.

The cylindrical airflow generator "Circle Blow" is an air nozzle that emits a cylindrical stream of air at high speed from a thin slit, attracting and amplifying a large amount of surrounding air to create a powerful annular amplification flow. The amplified flow, which blows evenly and uniformly in 360°, is effective for draining, cleaning, drying, and cooling long products such as pipes, cables, and extrusion rods. The hole diameter ranges from 25mm to 180mm.

• Pneumatic Equipment

A compact spot cooler that generates ultra-low temperature air with a maximum temperature difference of -75°C just by connecting compressed air.

The Kolder is a simplified spot cooler that applies the principle of vortex. Without using a power supply or refrigerant gas, it discharges ultra-low temperature air with a maximum temperature difference of -75°C (at a supply pressure of 0.7 MPa, in the case of model 190-75SV) simply by connecting compressed air. A typical application of the generated cooling air is the removal of heat generated during the processing of materials such as metals and plastics, and it demonstrates excellent effectiveness, especially in the processing of hard materials and high-viscosity substances (such as titanium alloys, stainless steel, nickel alloys, and thermoplastic plastics). Additionally, the cooling effect on workpieces and tools leads to improved cutting speeds and extended tool life, making it particularly suitable for dry cutting of magnesium alloys. Furthermore, it is effectively utilized as a cooling source for various spot cooling applications, including preventing heat-related issues in electrical control boxes and various measuring instrument boxes, cooling molds, and cooling tests for semiconductors and PC boards. *For more details, please refer to the basic information and downloadable materials at the bottom of the page.

• Pneumatic Equipment

No power supply needed. This is a cabinet cooling (heat dissipation) dedicated spot cooler that operates solely on compressed air.

The "cabinet cooler" reduces overheating inside NC or CNC cabinets, electrical control panels, motor boxes, surveillance cameras, various measuring instruments, etc., protecting precision machinery and measuring instruments from malfunction or damage due to overheating. Additionally, the automatic exhaust mechanism of the cabinet cooler keeps the inside of the cabinet in a pressurized state with cooling air at all times, preventing the intrusion of dust and mist from outside the cabinet and protecting electronic devices from contamination. By using a thermostat and solenoid valve, it is possible to regulate the temperature inside the box and reduce the amount of compressed air consumed.

• Other environmental equipment

It was manufactured for the purpose of air transportation using compressed air. During operation, it does not require a power supply, making it suitable for use in explosive environments.

The conveyor back is a device that enables air transport through a powerful vacuum pressure generated by compressed air as the power source. It has no moving parts and does not require a power supply, making it effective in environments where explosion-proof measures are required, as well as for the transport and exhaust of gas and mist.

• Pneumatic Equipment

The Coanda effect generates a thin, uniform curtain-like laminar flow. Its applications are diverse, including drainage, drying, heat dissipation blowing, and cooling.

The "Line Blow" is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions for tasks such as draining, drying, and blowing away. ◆ Are you having trouble selecting piping components? ◆ >>> Product selection is available at the Satellite Showroom <<< In April 2018, we opened a Satellite Showroom in Odaiba displaying approximately 2,500 items as a new initiative to improve customer satisfaction in industrial piping components. [See]・[Touch]・[Sit]・[Choose] Our specialized staff will assist you in product selection. Please feel free to contact us. For those coming by train: Get off at Yurikamome "Telecom Center" Station and walk about 2 minutes. 【Contact Information】 TEL: 048-871-0501 Satellite Showroom Weekdays: Monday to Friday 10:00 AM to 5:00 PM

• Hydraulic Equipment

Suction and blow, two functions in one device. It is a tool that enables powerful vacuuming and blowing.

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. The "Round Blow" can be used in two roles: as a vacuum system or as a powerful air blow device.

• nozzle

It is small enough to fit in the palm of your hand, yet capable of powerful vacuuming and blowing.

The jet blower is a palm-sized air volume amplifier that generates a powerful vacuum pressure by blowing compressed air from slits provided along the inner wall of the main body, attracting a large amount of surrounding air from one side while expelling a large volume of amplified air from the other side. With a duct hose, it can be used for dust collection and recovery of debris, smoke, and particulate or fibrous materials, as well as for pneumatic conveying. Without a duct hose, it can be used for draining water after cleaning products or parts, as well as for drying, cooling, and blowing away cutting chips and debris.

• Pneumatic Equipment

"Blow," "drain," "dry" - spot blow with amplified air.

This is a blow nozzle that ranges from air volume amplification type to high thrust type. Air volume focused type Equivalent to direct injection into pipes with a diameter of 2 to 4 mm Material: Made of aluminum, stainless steel Thrust focused type Equivalent to direct injection into pipes with a diameter of 2 to 4 mm Material: Made of stainless steel

• nozzle

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.