We will exhibit at JASIS 2019.

The measurement of low viscosity substances can be done with high precision. Additionally, by using patented bearing technology, it achieves compactness and low cost. Clean air management is also unnecessary.

This is a rheometer suitable for rheological measurements of low-viscosity liquids, employing a double cylindrical method with an outer cylinder rotation (capable of measuring viscosity and elasticity). The torque measurement section features a practical elastic hinge bearing developed by AIST, achieving high-sensitivity torque measurement without using air bearings. This eliminates the need for clean air management, allowing for more flexible installation locations. It also contributes to CO2 reduction. Additionally, it is easy to maintain and offers advantages in size and cost. New measurement method: Dynamic viscoelastic measurements can be performed under steady flow conditions. Please give it a try. 【Features】 - Outer cylinder rotation, inner cylinder detection method with a separated drive and detection axis (strain-controlled type) - Easy sampling due to the upper support method for inner and outer cylinders - The standard glass outer cylinder allows observation of the sample's condition from the outside during measurement - The standard sample volume is relatively small, around 4ml (minimum approximately 2.5ml) - Various measurements, including dynamic measurements, can be easily performed *For more details, please download the materials or contact us.

• Viscometer

Ideal for measuring the friction coefficient of filaments, hair, and more! A measurement device that can be easily and reproducibly used.

The friction coefficient meter "NRF Series" is a device for measuring the friction coefficient when filaments, tapes, hair, etc., come into friction with other materials, as well as for measuring the temporal changes in the friction coefficient due to the wear of the sample or the material being rubbed. It allows for variable friction speeds and sample tension, and measurements can be taken by changing the material being rubbed as needed. The measurement of the friction coefficient of filaments, fibers, hair, etc., can be easily and reproducibly performed by anyone. The measurement is simply done by applying the sample and rotating the pulley at a specified speed. 【Features】 ○ For samples with scales, such as hair, it can measure the friction coefficient when the friction direction (rotation direction) is changed. ○ The effect of lubricants and other factors on friction or wear can be measured. ○ Wear tests can be conducted. ○ The influence of the material and processing precision of pulleys, etc., on the same sample can be understood. ○ The force applied to the pulley shaft can be measured. *For more details, please feel free to contact us.

• Other measurement, recording and measuring instruments

Explaining the principles and benefits of rheology and viscoelasticity measurement, the mechanisms of measurement devices, and examples of applications! For consideration of rheometers/viscometers!

At Daicai Giken, we manufacture and sell rheometers (viscoelastic measurement devices). Along with the introduction of the air-bearing-less rheometer (viscometer) 'ONRH type', we are publishing technical explanation materials. 【Contents】 1. About Rheology 2. Benefits of Viscoelastic Measurement 3. About the Viscoelastic Measurement Device Rheometer 4. Visualization of Measurements (Example of Foam Detergent) 5. International Patent Technology "Elastic Hinge Bearing Mechanism" 6. Other Features and Measurement Values (Stability Test of Coffee Creamer, Gelation of Dilute Gelatin) The materials are organized in an easy-to-understand manner using various data, images, and real examples. Please download the PDF and take a look.

• Other physical property measurements and component analysis
• Viscometer
• Other analytical and testing equipment

A high-functionality and high-performance rheometer that does not use air bearings. It is suitable for rheological measurements of low-viscosity liquids. No need for clean air management!

This is a rheometer suitable for rheological measurements of low-viscosity liquids, adopting a double-cylinder method with an outer cylinder rotation (capable of measuring viscosity and elasticity). The torque measurement section features a practical elastic hinge-type bearing developed by AIST, achieving high-sensitivity torque measurement without using air bearings. This eliminates the need for clean air management, allowing for more flexible installation locations. It also contributes to CO2 reduction. Additionally, it is easy to maintain and offers advantages in terms of size and cost. New measurement method: Dynamic viscoelastic measurements can be performed under steady flow conditions. We encourage you to give it a try. 【Features】 ○ Outer cylinder rotation, inner cylinder detection method with separate drive and detection axes (strain-controlled type) ○ Upper support method for inner and outer cylinders facilitates sampling ○ The standard glass outer cylinder allows for observation of the sample's condition during measurement ○ The sample volume is relatively small, with a standard of about 4ml (minimum approximately 2.5ml) ○ Various measurements, including dynamic measurements, can be easily performed *Please feel free to contact us for more details.

• Viscometer

Here are some references that use the rheometer from Daicel Technical Research.

■Presenters Kanako Sato, Isamu Kaneda <Paper Title> "Gelation Behavior of Egg White Protein Aqueous Solution Near the Thermal Setting Temperature" Proceedings of the 65th Rheology Discussion Meeting (2017) ■Presenters Shogo Shibata, Isamu Kaneda <Paper Title> "Rheological Properties of Complexes Formed by Saxagliptin and Egg White Protein" Proceedings of the 65th Rheology Discussion Meeting (2017) ■Presenter Isamu Kaneda <Paper Title> "Rheology of Egg Dishes" Journal of the Japanese Society of Biorheology 31(2) 37 (2017) ■Presenters Kanako Sato, Isamu Kaneda <Paper Title> "Gelation Behavior of Concentrated Aqueous Solution of Dried Egg White at Low Temperature" Journal of the Japanese Society of Biorheology 31(2) 97 (2017) *If necessary, we can send the literature upon request. *You can view the materials for the rheometer 'ONRH type' from the download section.

• Analytical Equipment and Devices

Viscosity and yield value measurement is possible! Axial type viscometer for printing inks.

The "L-A type viscometer (compliant with JIS K5701-1-2000)" is a so-called axial type viscometer with a shaft that moves in the length direction and has a concentric cylindrical shape. It can measure viscosity and yield value, which are important parameters for quality control of high-viscosity substances such as printing inks and varnishes. Shear rate and shear stress can be easily expressed through calculations. 【Features】 ○ Very easy to operate ○ The sample is placed in the gap between a temperature-controlled ring and a rod with applied load ○ Viscosity and yield value can be measured by measuring the descent time over a specified distance *For more details, please feel free to contact us.

• Viscometer

Ideal for measuring the viscosity and flow of non-Newtonian fluids! Cone-plate viscometer.

The "NRM-200 Series" is a rotational viscometer with a cone plate (standard) configuration. The measured data can be subjected to theoretical analysis, making it suitable for viscosity and flow measurements of non-Newtonian liquids. Additionally, it allows for stable viscosity measurements at high shear rates, enabling flow measurements that correspond to actual working conditions in coating, spraying, and printing. 【Features】 - The shear rate can be measured consistently at any part of the sample, allowing for theoretical calculations of the measurement data. - Shear rates of up to 18,000 s⁻¹ can be achieved (when using 1,000 RPM). - The measurement sample volume is less than 1 mℓ. - The gap between the cone and plate is set using an electrical sensing method and a micro-adjustment mechanism. - The sample history prior to measurement can be controlled programmatically. *For more details, please feel free to contact us.*

• Viscometer

AIST Technology Transfer Venture! Oina Giken Co., Ltd., a manufacturer and seller of rheometers.

Daisai Giken Co., Ltd. was established with the aim of popularizing high-performance rheometers, including the ONRH type, through the transfer of excellent technology and human resources from the National Institute of Advanced Industrial Science and Technology. The ONRH type rheometer is a high-performance, double-cylinder rotational rheometer without air bearings, capable of stably measuring low-viscosity samples. It is a "National Institute of Advanced Industrial Science and Technology technology transfer venture" that always aims for the "advancement of technology" sought by our customers. 【Products】 ○ Rheometers ○ Contract sample measurement ○ High shear viscometers ○ L-A type viscometers (compliant with JIS K5701) ○ Friction coefficient meters, NRF type *Please feel free to contact us for more details.

• Viscometer
• Other measurement, recording and measuring instruments

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

Our company will be exhibiting at the "JECA FAIR 2026 - 74th Electrical Construction Industry Exhibition" held at Tokyo Big Sight from May 27 (Wednesday) to May 29 (Friday), 2026. At this exhibition, we will introduce products such as the coreless current sensor (for reference), the "PAL-Plus typeE / PAL-Plus typeE2" suitable for simple electric power measurement in factories and facilities, and the management software "CEW-M4" that visualizes and manages power consumption and surplus capacity of equipment. 【Main Exhibited Products】 - Wire-wound coreless current sensor (for reference) - PAL-Plus typeE / PAL-Plus typeE2 - CEW-M4 Please take a look at our solutions that are easy to implement even in confined spaces or where power outage work is to be avoided, and that help solve on-site challenges. We sincerely look forward to your visit.

[Speaker] PwC Consulting LLC PwC Intelligence Manager Toshinori Tomizawa [Key Lecture Content] The defense industry is gaining attention as a field for growth strategy consideration, while also facing constraints such as declining birth rates, supply chain vulnerabilities, and uncertainties in business continuity. This lecture will reframe the defense industry not merely as a supplier of equipment but as an industrial structure that includes technology, supply chains, and economic security, based on the published report "Environmental Changes Surrounding the Defense Industry and Corporate Choices." It will then present the potential for Japanese companies to participate and the criteria for decision-making, centered around the "International Supply Model," which consists of three forms: export of completed equipment, international joint development and production, and regional maintenance hubs. [Lecture Items] 1. Environmental changes surrounding the defense industry 2. Structural constraints faced by Japan's defense production and technology base 3. "International Supply Model" based on international cooperation 4. Potential for Japanese companies to participate in the defense sector 5. Criteria for decision-making regarding involvement in the defense sector 6. Future outlook for the defense industry and choices required from companies 7. Q&A / Business card exchange

[Instructor] Kyoko Kawasaki, President and CEO, First Innovatec Co., Ltd. [Key Lecture Content] This seminar will explain the thinking necessary to enhance the quality of decision-making in research and development themes. In recent years, while the importance of research and development investment has increased, challenges have emerged where traditional cost-effectiveness and numerical indicators are insufficient for evaluation, particularly when the applications and markets for technology are uncertain. In such situations, it is crucial to not only gather data but also to reassess the "perspective on decision-making," including what to capture, how to interpret it, and under what conditions to make judgments. In this seminar, we will organize the basic structure of evaluation centered on the relationships between technology, applications, and markets, and discuss the factors that distort decision-making as well as the thought processes for making judgments on themes with high uncertainty. Additionally, we will address how to compare and select multiple research and development themes from various perspectives and how organizations should design their decision-making processes. The aim is not merely to introduce evaluation methods but to clarify what perspectives should be held in actual decision-making, thereby contributing to the improvement of the quality of judgment regarding research and development investments within one's own company.