Exhibited at the Powder Industry Exhibition Osaka 2019.

Probe-integrated model for iron base only.

This is a pocket-sized digital thickness gauge with an integrated probe and main unit. Zero and standard adjustments are easily performed with a one-touch button. Its lightweight, palm-sized body and simple key layout allow for easy one-handed operation. - Measurement method: Electromagnetic induction - Measurement range: 0 to 999μm to 2.5mm - Measurement accuracy: 0 to 100μm; ±1μm or ±2% of the indicated value 101 to 2.5mm ±2% of the indicated value - Display method: LCD, display hold - Probe: Single-point constant pressure contact type - Power supply: Two AA alkaline batteries - Dimensions and weight: 63×84×30 mm, 125g - Additional features: Backlight switch, auto power off switch, range switch for 0.1μm display (for measurements under 100μm)

• Coating thickness gauge

Portable probe-integrated film thickness gauge

Portable probe-integrated dual-type thickness gauge Automatically identifies and measures base metals Can measure in dark places with backlight FN type is single-function, Pro type is high-function Pro type features measurement value and calibration curve memory function, data transfer to PC - Measurement method: Electromagnetic and eddy current dual-use - Measurement range: 0–900μm to 2.5mm (ferrous base) 2.0mm (non-ferrous metal base) - Measurement accuracy: ±1μm or ±3% - Display method: LCD digital - Probe: Single-point constant pressure contact type - Power supply: Two AA alkaline batteries - Dimensions and weight: 63×84×30 mm, 125g - Additional function: Switchable display of 0.1μm (for measurements under 100μm)

• Coating thickness gauge

A detector effective for pinhole detection and defect inspection of thin insulating films on electronic devices and precision machinery.

The "TO−5DP" is a low-power, direct current high-voltage detector used for detecting pinholes in relatively thin films, such as fluororesin, that are less than a few hundred microns thick. It is effective for detecting pinholes and inspecting defects in thin insulating films of electronic devices and precision instruments. Please utilize it for the inspection of thin films. 【Features】 ■ Low power ■ Direct current high-voltage type ■ Effective for detecting pinholes and inspecting defects in thin insulating films of electronic devices and precision instruments *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Basic type of moisture measurement! Flexibly accommodates various moisture measurements with different connected probes.

The MR-200II is a compact electric moisture meter. With its upper and lower limit functions, it allows for easy checking of dryness and moisture levels. It features a large, easy-to-read LCD display on a compact body. It can flexibly accommodate various moisture measurements depending on the connected probe. The "standard probe" for use with the MR-200II is available for purchase separately. 【Features】 ■ Flexibly accommodates various moisture measurements depending on the connected probe ■ Large, easy-to-read LCD display on a compact body ■ Easy checking of dryness and moisture levels with upper and lower limit functions *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 31st Measurement and Measurement Exhibition INTERMEASURE 2024 Official Website: https://intermeasure.org/itms2024/ 【 Dates 】 From __ (Wednesday) to __ (Friday), 202_ 【 Venue 】 Tokyo Big Sight (Tokyo International Conference Center) East Hall (Booth Number: ___) 【 Exhibited Products 】 - Air Leak Tester - Hydrogen Leak Detector - Pin Hole (Reference Test Piece) and more. For more details, please refer to the "Related Materials" (PDF file) below.

Nitto Kohki will exhibit at the "H₂ & FC EXPO Spring International Hydrogen and Fuel Cell Exhibition" held at Tokyo Big Sight, West Exhibition Hall 2, from February 28 (Wednesday) to March 1 (Friday), 2024. [Booth Number: W14-63] The quick fluid coupling "Coupler" is a product that allows for the rapid connection and disconnection of piping for various fluids such as air, water, oil, and chemical solutions. At this exhibition, we will primarily showcase the high-pressure hydrogen filling quick fluid coupling "HHV Coupler."

☆☆☆ Urgent Visit to Japan & Emergency Event Announcement ☆☆☆ Dr. Yuval Levy, CEO of ISCFDC and developer of EPPIC, who has been involved in CFD research at NASA Ames Research Center for about five years, is coming to Japan! He will demonstrate and explain advanced CFD technologies, application cases, and the latest features of EPPIC himself. □ Date and Time □ July 31, 2026 (Friday) 13:00-18:00 (Registration starts at 12:30) <Part 1: Post-Processor Session> 13:00-16:40 <Part 2: Pre-Processor Session> 16:50-17:50 <Networking Event> 18:10-19:40 □ For more details □ Visit the Hulinks page https://www.hulinks.co.jp/seminar/eppic/

[Viewer Benefits Available] Explaining Tips for LC in a Short Seminar Do you have concerns such as "I'm unsure about column selection," "I'm struggling to optimize analysis conditions," or "I have challenges analyzing compounds with weak retention" in LC analysis? Waters will hold a seminar titled "Must-Listen! Advanced LC Application Seminar" where you can learn practical LC analysis know-how in just 30 minutes. In this seminar, we will cover useful topics in a total of six sessions, including tips for choosing detectors, how to utilize reverse phase columns, scaling up to preparative LC, approaches for analyzing hydrophilic and highly polar compounds, case studies of low-adsorption HPLC, and improving purity through solid-phase extraction. Each session is scheduled to start at 15:00. Event Themes: • October 6 (Tuesday) - Session 1: Tips for Choosing Detectors • October 13 (Tuesday) - Session 2: Tips for Choosing Columns • October 21 (Wednesday) - Session 3: Tips for Preparative LC • October 27 (Tuesday) - Session 4: Approaches for Analyzing Hydrophilic and Highly Polar Compounds • November 5 (Tuesday) - Session 5: Case Studies of Low-Adsorption HPLC • November 10 (Tuesday) - Session 6: Tips for Solid-Phase Extraction

In liquid biopsy research, we will introduce a technical evaluation of proteome analysis to obtain reliable data from trace plasma, as well as case studies on data quality verification using the Contamination Index and Simple Western.