We will exhibit at EMO Hannover 2019, the world's largest metalworking trade fair.

New product released in August 2017! It is a charge amplifier for multi-component force measurement with built-in AD conversion functionality!

The LabAmp model 5167Ax1 is an excellent charge amplifier for multi-component force measurement and also a device that directly outputs digitized measurement values to a host computer for analysis. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Direct connection to the dynamometer: Fischer plug • Connection to evaluation software DynoWare model 2825A • Processes up to 100kSps per channel with 24-bit resolution • Processes continuous digital signals with minimal delay • Flexible low-pass, high-pass, and notch filter adjustments • Low noise specifications • Flexible scaling of 4 or 8-channel analog outputs • Status display via LED • Configuration and control via standard web browser or evaluation software DynoWare • Compatible with LabVIEW • Two-port Ethernet interface with switching functionality

• lathe
• Milling machine
• Grinding Machine

A general-purpose data acquisition system for controlling interfaces and charge amplifiers!

This DAQ system is versatile and serves as a data acquisition system for controlling interfaces and charge amplifiers. It is suitable for force measurement using single-component or multi-component force sensors, in addition to cutting power meters. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Easy installation using USB 2.0 port • Remote control of charge amplifiers • Powerful data acquisition system • High sampling rate • Trigger function

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

Measure the three orthogonal components of force, enabling the measurement of extremely small forces with high resolution and high sensitivity!

The multi-component small power meter model 9119AA1 measures three orthogonal components of force and enables the measurement of extremely small forces due to its high resolution and sensitivity. ◇ Measurement range: ±4kN, Top plate: 39x80mm (9119AA1) / 55x80mm (9119AA2) －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Compact design • High sensitivity and natural frequency • Minimal temperature influence • Titanium top plate • Cutting force measurement in ultra-precision machining • Multi-component force measurement

• Other measurement, recording and measuring instruments

Sensors for data collection that support optimal processing conditions are active in a wide range of applications!

A fixed cutting dynamometer capable of calculating three-component forces and three-component moments during cutting and grinding processes. Its compact design and large measurement range make it suitable for installation in spaces with limited room. ◇ Measurement range: ±10kN, Top plate: 90x105mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ ・ Compact design ・ Large measurement range ・ Minimal temperature influence ・ Ideal for cutting force measurement ・ Suitable for multi-component measurement

• Other measurement, recording and measuring instruments

Minimizing the impact of temperature through a special arrangement method. Achieving high-quality measurements of dynamic processes in machining and force measurement!

The multi-component dynamometer model 9139AA measures three orthogonal components of force. Its robust and high-rigidity design allows for a wide measurement range, making it capable of high-load measurements. ◇ Measurement range: ±30kN, Top plate: 140x190mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Wide measurement range • Temperature compensation design (patented) • Compact and sturdy design • High natural frequency

• Other measurement, recording and measuring instruments

Due to its high rigidity and natural frequency, as well as excellent resolution, it is possible to measure even the dynamic changes of very small forces while a large force is being applied!

This quartz piezoelectric three-component dynamometer can measure the three orthogonal components of force. It features a high-stiffness structure with a high natural frequency. Additionally, due to its high resolution, it can measure even slight dynamic changes in large forces. ◇ Measurement range: -10 to 60 kN, Top plate: 260x260 mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Wide measurement range • Suitable for high-durability applications

• Other measurement, recording and measuring instruments

Due to its very high rigidity and natural frequency, as well as excellent resolution, it is possible to measure even the dynamic changes of very small forces while a large force is acting!

A fixed cutting dynamometer that can measure orthogonal three-component forces during cutting and grinding processes. It is ideal for optimizing cutting conditions and monitoring cutting states. Despite its wide measurement range (Fx, Fy, Fz: ±5 kN), it has excellent dynamic resolution (0.01 N), allowing for the measurement of very small dynamic changes in force even when large forces are acting. ◇ Measurement range: ±5 kN, top plate: 100x170 mm

• Other measurement, recording and measuring instruments

Measuring the three orthogonal components of force plus torque. Due to high rigidity and natural frequency, as well as excellent resolution, it is possible to measure even slight dynamic changes in large forces and torques!

This 4-component dynamometer can measure the orthogonal three components of torque and force generated around the axis of the dynamometer. It features a high-rigidity structure with a high natural frequency. Additionally, due to its high resolution, it can measure even slight dynamic changes in large forces or torques. ◇ Measurement range: ±5kN/±200Nm, Top plate: Φ100 －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ ・Compact, robust multi-component force measurement device ・Versatile ・For measuring cutting forces and grinding forces during drilling, milling, turning, and grinding operations.

• Torque Meter
• Other measurement, recording and measuring instruments

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.