Powder Technology Exhibition Osaka 2019 (Powtex 2019) will be exhibiting again this year!

Low wear and high durability crusher. Multi-purpose, high performance, and low price with over 10,000 units sold.

The "Makino Type Crusher DD Series" features a directly connected rotating plate that reduces transmission loss, while also achieving cost reduction through simplified structure. The attached blades on the rotating plate are hardened, making them resistant to wear and providing excellent durability. Additionally, the shape of the blades has been modified from previous models to achieve further fine grinding. It is compatible with various raw materials such as ores, resins, gypsum, glass, and grains. 【Features】*For details, please refer to the catalog. ■ Achieved approximately 30% cost reduction (compared to our company) through structural simplification ■ No maintenance required for belt adjustments due to direct motor connection ■ Special cast steel used for blades extends the lifespan of consumables ■ Capacity increase is possible with only motor replacement ■ Consideration of blade arrangement reduces noise and airflow generation ■ Changing the rotation speed is easy with an inverter ◎ For more information, please refer to the PDF materials or feel free to contact us.

• Crusher
• Crusher/Mill

Fully cleanable mixing machine, ribbon mixer, sanitary specifications.

A mixing machine with a body casing that has a fully welded structure and can be completely cleaned. ■Features■ ■ The case is designed with a fully welded structure and a clever connection of the shaft to achieve complete cleaning. ■ The ribbon part is also designed with cleaning in mind. ■ The seals in the bearing section are made of a two-part resin for easy removal. ■ Volume: 50 to 1,500 liters (actual capacity). ■ Discharge methods: slide gate, swing gate, choke valve. ■ Materials: contact parts made of SUS304/316/316L; seal resin made of nylon and others. ■ For other functions and details, please download the catalog or contact us.

• Mixer/agitator

Crushing resin-based pellets such as plastics at room temperature! Sharp blades that can cut films as thin as 0.005mm.

The "SRC Series" is a grinding machine that can finely pulverize plastic pellets at room temperature. It is equipped with numerous sharp blades that can cut ultra-thin films of 0.005mm, allowing for repeated cutting until the desired fineness is achieved. A dust collector at the top collects only the fine powder, enabling the production of plastic powder with the desired particle size. Unlike traditional cryogenic grinding, it does not require large-scale equipment and is very cost-effective. Additionally, since it does not use screens for particle size control, there is no concern about product defects caused by clogging or tearing. 【Features】 ■ Capable of fine pulverization of plastic pellets ■ Can also finely grind paper, fabric, rubber, etc. ■ Grinding and classification can be performed simultaneously ■ Particle size can be changed by adjusting the airflow ■ Energy-efficient operation with only rotating and fixed blades *For more details, please contact us or download the catalog.

• Crusher

Prevents damage to raw materials and streamer formation in pellets. It also leaves no residue due to its self-cleaning action.

"Pellbow" is an elbow pipe that reduces friction of bulk materials during air transport due to its unique structure. The materials accumulated in the pocket-like "impact zone" cover the collision area, preventing damage to the transported raw materials and the generation of streamers during resin pellet transport, thereby suppressing the occurrence of fine powders and damage to the piping. Its compact design minimizes piping space, making it more space-efficient than standard elbow pipes, and it can be customized flexibly. 【Features】 ■ Self-cleaning action leaves no residue ■ Compatible with various standard flanges and pipes ■ Contributes to low noise levels ■ Low pressure loss *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other processing machines
• Other process controls

This is the comprehensive catalog for the plastic pellet foreign matter separation and removal machine, Pelatron Diduster.

We have followed the flow of nature. The pursuit of high-purity raw materials has led to the development of separation and classification technologies. Air cleaning of grains, corn, rice, and other foods has been practiced for thousands of years. Over the centuries, the need for efficiency in cleaning and separation/classification has led to the development of new technologies. The air cleaning, separation, and classification technologies in our latest machines are based on the same concept. For more details, please contact us or download the catalog.

• Food Conveyor Equipment
• Other process controls

Cleaning technology suitable for all pellets before product shipment, after transportation, and before manufacturing.

"Pelletron Didasters" is a super high-precision separation and removal device that efficiently separates and removes dust such as cutting chips, fines, powdery fluff, and strip fluff (which may mix in during processes like air transport) from pellets.

• Resin processing machine

Crush powerfully with a small motor! Ideal for coarse crushing in a wide range of applications from ores to food and chemicals.

The "Hammer Crusher" is a coarse crusher that powerfully crushes large raw materials. The hammer pins attached to the rotor stand upright due to the centrifugal force of high-speed rotation, and the tips of the hammers deliver a significant impact force at maximum peripheral speed, crushing lump, sheet, and granular raw materials to about a few millimeters. When the hammer strikes hard or difficult-to-crack materials, it swings and repeatedly delivers impacts, allowing for a large crushing capacity with a small motor compared to crushing all at once with fixed hammers. The product particle size is determined by the rotation speed of the hammers and the hole diameter of the attached screen.

• Other processing machines
• Crusher
• Crusher

Evaluating drug efficacy, safety, pharmacokinetics, and physical properties comprehensively from the early stages of the drug discovery process is essential for efficient pharmaceutical development. To support these evaluations comprehensively, the drug discovery support software StarDrop offers various modules. In this presentation, we will introduce an overview of the functions included in the metabolism prediction module, the Metabolism module, its theoretical background, and how it contributes to solving various challenges related to drug metabolism.

[Speaker] Mr. Hiroshi Fujimoto, Director of the DX Project Promotion Office, Tokyo Electric Power Company Holdings, Inc. [Key Lecture Content] As expectations for DX initiatives and AI utilization rise, particularly in the energy sector, the Tokyo Electric Power Group is promoting DX in conjunction with its management strategy, based on the Fifth Comprehensive Special Business Plan. In this lecture, we will introduce the overall concept of the group's DX strategy, initiatives for AI utilization, development of DX human resources, data utilization, and specific case studies. [Lecture Items] 1. Overview of DX utilization in the Tokyo Electric Power Group 2. Initiatives utilizing AI and data 3. Specific examples of re-evaluating business processes 4. Systems and innovations to advance initiatives 5. Development of personnel responsible for the DX field 6. Future direction 7. Q&A / Business card exchange (The lecture items may change based on the latest situation.)

[Speaker] Yukiko Konno, Counsel Attorney, Nagashima, Ohno & Tsunematsu Law Firm Yuki Matsuumi, Associate Attorney [Presentation Items] 1. Introduction (1) Overview of AI Implementation in Manufacturing and New Legal Risks (2) Latest Trends in AI and Cybersecurity Risks (Paradigm Shift in Threats Due to the Emergence of Myths, etc.) (3) Progress of AI and Cybersecurity Regulations in Various Countries 2. Manufacturing and AI (Incorporating AI into Products and Legal Liability, Focusing on Physical AI) (1) Trends in the EU (2) Trends in Japan (3) AI Contract Practices for the Manufacturing Industry 3. Manufacturing and Cybersecurity – Defense Practices for BtoB/BtoC Products – (1) Trends in the EU (2) Trends in Japan 4. Q&A / Business Card Exchange

[Speaker] Kenji Kikuchi, Executive Fellow, MDB Business Division, Japan Management Association Research Institute [Lecture Items] 1. Important latest research trends to consider for the future 2. Latest business information gathering methods for future insights 3. How to cultivate perspectives for looking toward the future, especially in times of turmoil 4. Must-see! Key points on noteworthy businesses that you should know 5. Introduction to the latest business information sources to pay attention to in the AI era for "future insights" 6. Q&A / Business card exchange

[Speaker] Mr. Yasunari Sugiyama, Partner Lawyer, Nishimura & Asahi Law Office, Foreign Law Joint Enterprise [Key Lecture Content] The Ministry of Agriculture, Forestry and Fisheries held a "Study Group on Desirable Agricultural Solar Power Generation" after May 2025 and announced a new regulatory proposal in April 2026, which includes a fundamental revision of the agricultural solar power generation system. This revision aims to (1) strengthen monitoring of both new and existing power generation projects, and (2) change the primary legal basis for new power generation projects to the Renewable Energy Act for Rural Areas, which is expected to have a significant impact on both the continuation of existing projects and the initiation of new ones. The purpose of this seminar is to examine and discuss what kind of initiatives from both the public and private sectors are necessary to ensure the proper development of agricultural solar power generation projects, in addition to the preparatory actions needed before the regulatory revision (it is also intended to facilitate ongoing exchanges of opinions and information after the seminar).