Notice of Participation in the 2nd High-Performance Coatings Exhibition

Probe-integrated model for iron base only.

This is a pocket-sized digital thickness gauge with an integrated probe and main unit. Zero and standard adjustments are easily performed with a one-touch button. Its lightweight, palm-sized body and simple key layout allow for easy one-handed operation. - Measurement method: Electromagnetic induction - Measurement range: 0 to 999μm to 2.5mm - Measurement accuracy: 0 to 100μm; ±1μm or ±2% of the indicated value 101 to 2.5mm ±2% of the indicated value - Display method: LCD, display hold - Probe: Single-point constant pressure contact type - Power supply: Two AA alkaline batteries - Dimensions and weight: 63×84×30 mm, 125g - Additional features: Backlight switch, auto power off switch, range switch for 0.1μm display (for measurements under 100μm)

• Coating thickness gauge

Portable probe-integrated film thickness gauge

Portable probe-integrated dual-type thickness gauge Automatically identifies and measures base metals Can measure in dark places with backlight FN type is single-function, Pro type is high-function Pro type features measurement value and calibration curve memory function, data transfer to PC - Measurement method: Electromagnetic and eddy current dual-use - Measurement range: 0–900μm to 2.5mm (ferrous base) 2.0mm (non-ferrous metal base) - Measurement accuracy: ±1μm or ±3% - Display method: LCD digital - Probe: Single-point constant pressure contact type - Power supply: Two AA alkaline batteries - Dimensions and weight: 63×84×30 mm, 125g - Additional function: Switchable display of 0.1μm (for measurements under 100μm)

• Coating thickness gauge

You can easily and quickly check the feasibility of anti-corrosion coatings for bridges, ships, steel towers, plants, etc. (in accordance with JIS Z 0313) PSPC compliant.

This is a surface salinity meter that allows for easy and rapid measurement of salt deposits on surfaces. Steel structures need to be cleaned before painting. In particular, salt concentration is very important as an indicator of cleanliness before painting, especially for corrosion prevention. It easily and directly measures the salt deposits on the surfaces of steel structures such as ships, bridges, and large tanks using three different methods.

• Other measurement, recording and measuring instruments

A detector effective for pinhole detection and defect inspection of thin insulating films on electronic devices and precision machinery.

The "TO−5DP" is a low-power, direct current high-voltage detector used for detecting pinholes in relatively thin films, such as fluororesin, that are less than a few hundred microns thick. It is effective for detecting pinholes and inspecting defects in thin insulating films of electronic devices and precision instruments. Please utilize it for the inspection of thin films. 【Features】 ■ Low power ■ Direct current high-voltage type ■ Effective for detecting pinholes and inspecting defects in thin insulating films of electronic devices and precision instruments *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Made-to-order product! Wet electric resistance method pinhole detector with low detection voltage that does not damage the coating.

The "Pinhole Tester PH Series" is a pinhole detector used for detecting and inspecting pinholes in thin insulating coatings generally below 200μm (or 500μm). Due to its low detection voltage, it does not damage the coating, making it widely used for pinhole detection, testing, and inspection of protective films in general vehicles, furniture, fixtures, cans, containers, general construction, building materials, machinery, and structures for rust prevention, corrosion protection, and other applications. 【Features】 ■ Wet electrical resistance method ■ Low detection voltage that does not damage the coating *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

A pinhole detector suitable for testing the degree of aging due to the extraction of plasticizers from coatings, resins, etc.

The "Micro Checker KS1" is a pinhole detector suitable for pinhole inspection using water as a resistive medium, or for testing the aging degradation of coatings, resins, etc., due to the extraction of plasticizers. It can be used for products such as paper pack products and plastic or rubber containers. 【Features】 ■ Characteristics not obtained in low voltage testing *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices

We can test conductive coatings! Introducing the wet-type pinhole detector.

The "SPH-12" is a wet-type pinhole detector that uses liquid as a medium. This product allows for variable and adjustable inspection thresholds, improving inspection accuracy. It is also capable of inspecting conductive paint. An optional storage case is also available. 【Features】 ■ Wet-type pinhole detector using liquid as a medium ■ Variable and adjustable inspection thresholds, improving inspection accuracy ■ Capable of inspecting conductive paint *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Rapid automatic detection of defects using high-voltage discharge! Non-contact pinhole detector.

The "Plastic Container Checker PPC" is a pinhole detector that can easily check containers that are prone to deformation. Sheet-formed containers may experience pinholes and similar defects during the molding process, regardless of whether they are pressure-formed or vacuum-formed. In single containers (such as blow bottles and PET bottles), defects are also likely to occur at parting lines and gates. This product quickly and automatically detects these defects using a high-voltage discharge method. 【Features (compared to conventional air leak checkers)】 ■ Non-contact type - Easily checks containers that are prone to deformation ■ Micro-holes - Instantly checks for micro-holes ■ Semi-defects - Can check for defects that are not complete holes but are likely to become pinholes during the transport process ■ Straight transport - Can be easily mounted on a straight transport device *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Pinhole inspection can be performed electrically and non-destructively! DC high voltage discharge pinhole detector.

The "TO-51C/151C/251C" is a pinhole detector specifically designed for concrete substrates. The main unit has been made smaller and lighter, and a new model for thin film inspection has also been introduced. 【Features】 ■ Compact and lightweight (25% reduction in volume compared to the old model) ■ Compatible with power supply voltages from 100V to 240V ■ Non-destructive inspection of pinholes in insulating coatings is possible *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

A pinhole detector suitable for detecting semi-defects! It allows for a long code extension.

The "TO-250D" is a high-output pinhole detector for thick film inspection. Since it uses a DC high voltage system, the terminal voltage is stable and it allows for longer cable extensions. It is suitable for detecting pinholes in thick rubber linings, enamel, or semi-defects. 【Features】 ■ For thick film inspection ■ DC high voltage system ■ Stable terminal voltage with long cable extension *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

High output! A high-output type pinhole detector that can also accommodate rubber lining.

The "TRK-330N" is a high-output type pinhole detector. This product is specifically powered up for pinhole inspection of thick films and rubber linings. The probe is made of PVC. 【Features】 ■ Specifically for pinhole inspection of thick films and rubber linings ■ High output *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Compact, simple, and affordable! We introduce a pinhole detector suitable for partial inspections and repair inspections.

The "Hollister 15N/5N" is a pinhole detector suitable for partial inspections of connection parts, component mounting areas, and deformation processing areas, as well as for full inspections of relatively small objects. This product operates using low-frequency high-voltage pulse discharge and can be used in a temperature range of 0 to 40°C. Additionally, the alarm system includes a lamp and a buzzer. 【Specifications (Excerpt)】 <Hollister 15N> ■ Method: Low-frequency high-voltage pulse discharge ■ Detection Voltage: 5-15kV (peak value) ■ Built-in Power Source: NiMH (Nickel-Metal Hydride) battery (with battery check function) ■ Charging Power Source: AC100V, 50/60Hz, 80VA ■ Usage Time: Approximately 2.5 hours (at maximum output voltage) ■ Alarm Method: Lamp, Buzzer ■ Target Coating Thickness: 0.8-5.0mm ■ Operating Temperature Range: 0-40°C (must not be exposed to condensation) ■ Dimensions: 70 (W) × 120 (H) × 220 (D) mm ■ Main Unit Weight: 1.1kg *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Introducing pinhole detectors weighing 4.2kg and 3.2kg! They come with an ABS-made telescopic probe.

Introducing the pinhole detector 'TRS-250II/70II', which operates on a low-frequency high-voltage pulse discharge method. The "TRS-250II" has a detection voltage range of 5 to 25 kV (peak value) and a weight of 4.2 kg. The "TRS-70II" has a detection voltage range of 1 to 7 kV (peak value) and a weight of 3.2 kg. Standard accessories include a probe storage case, a 5m ground wire, a 5m safety switch wire, and a 2m power cord. 【Specifications (excerpt)】 <TRS-250II> ■ Method: Low-frequency high-voltage pulse discharge ■ Detection voltage: 5 to 25 kV (peak value) ■ Power supply: AC100V, 50/60Hz, 36VA ■ Alarm method: Lamp, buzzer ■ Target coating thickness: 1mm or more ■ Operating temperature range: 0 to 40°C (must not condense) ■ Dimensions: 370(W) × 190(H) × 150(D) mm ■ Weight: 4.2 kg *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

To construction and civil engineering companies looking for the "next" step in digitalization. This seminar will explain the currently trending topic of "AI utilization" in 45 minutes. We will clearly introduce the latest trends, specific case studies, and steps for implementation to address questions such as "What can AI do?" and "How can it be applied to our business?" Whether your company is already advancing in DX or is just starting to consider AI, you will find hints for improving operational efficiency. 【Schedule】 1: Company introduction and instructor introduction 2: Case studies of AI utilization in the construction and civil engineering industry 3: Convincing examples! Patterns of AI utilization in construction operations 4: Three steps to avoid failure in AI implementation 5: Q&A and closing remarks

We will address the issue of young employees who, despite joining the company, leave due to reasons such as "there's no time to be taught," "I don't understand when I'm told to learn by watching," and "what is written and said varies depending on the project or person in charge." We propose a system that accumulates the know-how of veterans in AI and systems, allowing young employees to search for and solve problems on their own. 【Schedule】 1: Company introduction and instructor introduction 2: Reasons why technical inheritance is not progressing (lack of time, difficulty in verbalizing) 3: "Next-generation manual and know-how sharing methods" utilizing video and AI search 4: Examples of system construction to institutionalize technical inheritance 5: Q&A and closing remarks

We will be exhibiting from Wednesday, October 1 to Friday, October 3, 2025. Makuhari Messe https://www.jagri-global.jp/hub/ja-jp/visit/feature-t/plant.html Please stop by!

Metal 3D printers are becoming increasingly diverse, and recently, relatively affordable low-cost machines costing several million yen, binder jetting methods that enable mass production of parts, and high-speed, large machines for creating large components and products have been continuously introduced to the market. Furthermore, the prototyping of magnesium parts and the manufacturing of copper parts, which were difficult to create with existing machines, have begun. Metal 3D printers eliminate the need for molds by directly producing products from 3D data, and they can create complex shapes that were impossible with traditional processing methods, as well as lattice and porous structures, hollow structures, and hybrid structures. This enables the innovative creation of metal parts and molds that are not available from conventional or other companies, significantly reduces prototyping and manufacturing time, drastically decreases the number of parts, allows for lightweight and compact designs, and reduces manufacturing processes and workforce requirements. Using metal 3D printers, we provide easy-to-understand explanations for those considering the development of attractive new products, the creation of new businesses, differentiation from existing products, significant reductions in prototyping and manufacturing time, dramatic decreases in the number of parts, and cost-effective lightweight complex-shaped components, as well as for beginners who are interested in these topics. The world is energetically investing in metal parts and mold manufacturing as the leading candidate for the next generation, and mass production of parts has also begun in earnest. Manufacturing parts with metal 3D printers will become commonplace in a few years.

Techne Measurement Co., Ltd. will exhibit at CSEAC 2026, which will be held in Wuxi, China from August 31 (Monday) to September 2 (Wednesday), 2026. Please be sure to visit the Techne Measurement booth.