Notice of Participation in the Converting Technology Comprehensive Exhibition and New Functional Materials Exhibition 2020 (January 29-31, 2020)

Ultra-fine honeycomb structures of the world's smallest class. They are manufactured using a molding method with extrusion and can also be applied to thermoplastic resins.

Micro-honeycomb is a fine lattice structure formed using extrusion molding molds that leverage our fine hole and fine groove processing technology, exceeding 10,000 cells/in². We have a wide range of production achievements with various materials, including: - Ceramics (alumina, zirconia, etc.) - Metal materials (stainless steel) - Filler-containing thermoplastic resin materials Since it is produced using the extrusion molding method, which continuously discharges uniform cross-sectional shapes, it is also possible to manufacture integrated parts exceeding a length of 200mm. In addition to the production of honeycomb structures using our owned molds, we also accept new designs and prototypes starting from mold production, as well as external sales of molds only. *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Other molds

A mold for extrusion that continuously produces square, hexagonal, octagonal, and other lattice cross-sections. We will design the mold according to your desired specifications.

Our company offers "precision honeycomb extrusion molding dies" utilizing fine hole and fine groove processing technology. Honeycomb structures feature continuous lattice cross-sections such as square, hexagonal, and octagonal shapes, which provide the advantage of increasing the fluid contact area while minimizing pressure loss. We have a proven track record of being used for molds in the manufacturing of automotive exhaust purification catalysts, among others. We will design the mold to match your desired lattice design and molding machine. 【Main Design Specifications】 　■ Functional Diameter (Extrusion Diameter): Up to φ500mm 　■ Slit Width: From 0.07mm 　■ Lattice Hole Diameter: Minimum 0.7mm 　■ Slit Width Precision: ±10μm 　■ Lattice Hole Diameter Precision: ±10μm 　■ Lattice Pitch Precision: ±10μm *For more details, please refer to the PDF document or feel free to contact us.

• Mold Design
• Contract manufacturing
• Processing Contract

A nozzle with a hole diameter of 200μm or less, which is not commonly handled as a standard product. The tip is made of ceramic, so it can also be cleaned with solvents.

Our dispenser nozzle is a coating nozzle designed for tabletop dispensers, featuring a ceramic tip. 【Features】 - As a standard nozzle for tabletop dispensers, we can manufacture nozzles with a hole diameter of less than 200μm, which are not commonly available. (We can accommodate a minimum hole diameter of 5μm.) - The standard metal holder has a double-thread specification, allowing for direct attachment to commercially available dispensers and syringes. - The nozzle tip is made of ceramic, making it suitable for cleaning with solvents and thermal processing. (We will select materials according to the cleaning method.) - The inner surface of the nozzle has a tapered cross-section, produced through injection molding using molds, resulting in high smoothness and improved flow and coating properties. The inner and outer diameters of the nozzle tip can be manufactured to your specified dimensions. We also accept custom specifications for the metal holder. For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• dispenser

For fuel cells and high-strength exhaust gas treatment! We can accommodate prototype development with alloys and ceramic materials.

We provide "metallic porous bodies" made using a special manufacturing method. They are used in a wide range of applications, including fuel cell components, gas diffusion layers, separators, adsorption filters, and artificial joints. Additionally, we can also produce alloy porous bodies and nickel porous bodies. Please consult us regarding pore size, shape, and other materials. 【Correspondence as gas diffusion materials (electrodes) for various fuel cells】 ■ Can be manufactured from a thickness of 0.5mm ■ Pore ratio of over 80% ■ Corrosion-resistant conductive materials ■ Porous bodies that can efficiently diffuse reactants ■ Compressive strength that withstands assembly pressure ■ Compression creep characteristics that make it easy to maintain surface shape *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

Leave the complex and intricate shaped parts to us with the application of ceramic injection molding technology!

"Piezoelectric ceramics" are ceramics that convert pressure into electricity and expand or contract based on electrical signals, possessing piezoelectric properties. Thanks to the application of ceramic injection molding technology, it is possible to manufacture complex and fine-shaped components. We offer a lineup of materials with different properties for various applications ranging from soft to hard. We can recommend materials tailored to your needs. We are also capable of forming electrodes on inner and outer diameters, patterning, and polarization treatment. 【Features】 ■ Possesses piezoelectric properties that convert pressure into electricity and expand or contract based on electrical signals ■ Capable of manufacturing complex and fine-shaped components ■ A lineup of materials with different properties ■ Capable of forming electrodes on inner and outer diameters, patterning, and polarization treatment *For more details, please refer to the PDF document or feel free to contact us.

• tube

Introducing Chofune Manufacturing's "Ceramics Precision Micro Parts" and their features!

We would like to introduce Nagamine Seisakusho's "Ceramics Precision Micro Parts," which offers a wide range of ultra-precision molded products using microtechnology. Our company provides "IC Chip Suction Nozzles (for Surface Mount and IC Chip Transport)" that are compatible with the next-generation surface mount standards "03015" and "0201," as well as "Dispenser Nozzles/Inkjet Nozzles (for Liquid Dispensing and Droplet Ejection)" that can reduce wear even during high-pressure discharge. **Features of the IC Chip Suction Nozzle (for Surface Mount and IC Chip Transport):** - Utilizes fine ceramics with excellent wear resistance → Contributes to longer component lifespan and reduced nozzle replacement frequency - Minimizes machining by leveraging injection molding → Achieves low-cost and short lead time for mass production - Static electricity countermeasures are possible with conductive ceramic materials - Nozzles can be manufactured to match various mounting machines *For more details, please refer to the PDF document or feel free to contact us.*

• Contract manufacturing
• Processing Contract

No expensive molds needed! Directly create from 3D model data using a 3D printer!

"3D Ceramic Forming Technology" is a new shape-giving technology for ceramics using 3D printers. It allows for direct shaping from 3D model data without the use of expensive molds. Using the FDM (Fluid Deposition Modeling) method, it enables the one-shot creation of three-dimensional structures that cannot be produced with existing molding techniques. It can also be applied to materials other than ceramics, such as metals. 【Features】 ■ Direct shaping from 3D model data without the use of expensive molds ■ One-shot creation of three-dimensional structures that cannot be produced with existing molding techniques ■ In-house preparation of materials (filaments) for three-dimensional shaping ■ Support for three-dimensional prototype shaping from supplied raw materials ■ Applicable to materials other than ceramics, such as metals *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

Used for the exhaust outlets of the Central Circular Route Tunnel in the capital! It absorbs and decomposes exhaust gases and unpleasant odors.

The "Honeycomb Catalyst and Absorbent" responds to environmental conservation by absorbing and decomposing exhaust gases from sources of air pollution and unpleasant odors. Our NC honeycomb is widely used for ventilation in tunnels such as roads and for exhaust gas treatment in underground parking lots. It serves its catalytic function by allowing passage through the honeycomb structure. Since it is molded from our own extrusion molds, we can accommodate your requests regarding cell count, wall thickness, and size. 【Features】 ■ Absorbs and decomposes exhaust gases from sources of air pollution and unpleasant odors ■ Honeycomb catalyst that can neutralize acidic gases with alkalinity ■ Customizable cell count, wall thickness, and size according to your needs ■ Selection of catalyst materials tailored to your intended application is possible ■ We also accept prototype molding of materials you provide *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other polymer materials
• Wood products

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

On this occasion, we have opened a showroom for Tajima embroidery machines in conjunction with the renovation of the Chūnichi Jūki headquarters building. To commemorate the opening of the showroom, we will hold an exhibition of Tajima embroidery machines.

Next-generation large resin and metal 3D printers that achieve astonishing high-speed molding, low-cost, and high-precision molding are being rapidly introduced to the market. These printers are being utilized in the manufacturing of large parts and products in the aerospace, automotive, industrial machinery, plant, defense, and social infrastructure sectors, as well as in parts and mold repairs and reverse engineering. In this seminar, we will discuss the latest developments and features of cutting-edge machines from Stratasys, the largest manufacturer of large resin 3D printers, and Lobotics, along with domestic and international case studies. We will also explore innovative molding technologies from leading users such as Fujikohsai Industries and Sanko Gosei, who utilize large metal 3D printers from Meltio and Matsuura Machinery to create large metal parts, large metal products, and large mold components. The seminar will provide concrete and easy-to-understand explanations of key points and considerations for implementation and utilization, various manufacturing examples, and discussions on molding size, quality, cost, lead time, and success and failure stories. 3D printers enable the complex integrated molding of multiple parts into a single large shape, which was impossible with previous processing methods and technologies. This capability allows for a significant reduction in the number of parts, achieving short lead times, low costs, high-quality manufacturing, and a reduction in the number of processes and personnel involved.

Copper, which has a high laser reflectivity and quickly dissipates the thermal energy from laser irradiation, was difficult to shape using metal 3D printers. However, recently developed high-performance and high-functionality metal 3D printers, along with pure copper and copper alloy powders that have a high laser absorption rate and excellent 3D moldability, have been introduced to the market, and practical applications are rapidly advancing in leading companies. Metal 3D printers enable the creation of complex shapes and integrated structures, lattice/porous structures, and hybrid structures that were previously impossible, allowing for the innovation of parts, rapid development and prototyping of components, significant reduction in the number of parts, improved quality, lightweight and compact designs, and cost reduction. This has led to increased adoption and utilization in applications such as heating coils, heat sinks, heat exchangers, motor coils, and electronic and electrical devices. In this seminar, we will provide a clear and detailed explanation of the latest trends in pure copper and copper alloy powders suitable for 3D additive manufacturing, developed by Fukuda Metal Foil Powder Industry, as well as case studies of layered molding with pure copper and copper alloys. We will also discuss innovative molding technologies and examples that are unique to our company, as demonstrated by leading users such as TK Engineering, ODEC, and Fasotec, who are utilizing metal 3D printers to manufacture low-cost, high-quality copper components in a short time, sharing both success and failure stories.

We will hold an in-person event to introduce the latest technologies in molecular design. In addition to updates on the molecular design platform "Orion," we are scheduled to have cutting-edge research presentations by OpenEye and external speakers, including "the discovery of new leads by adding three-dimensionality to trillion-scale virtual screening" and "the identification of cryptic pockets that expand druggable areas." Furthermore, we will be introducing the next-generation shape similarity search tool "ROCS X," which was first unveiled at miniCUP Boston, for the first time in Japan at this event. ROCS X evolves the traditional ROCS, enabling faster and more accurate three-dimensional screening, contributing to the efficiency of lead discovery in drug research. Don't miss the latest technologies that accelerate the drug discovery process, including molecular modeling, structure-based drug design, and AI-driven screening! We look forward to your participation.